Accessories for Draining rack, PS
Product number:
6317693
Manufacturer:
Heathrow Scientific LLC
Packaging information:
Weight:
0.09 kg
Description
Properties
| Description: | Replacement Draining basket Kit |
|---|---|
| Description: | Replacement Draining basket Kit |
| Manufacturer Article Number: | HS120792 |
Skip product gallery
Rods for LaboPlast® draining racks
From
CHF 2.20*
Draining racks, PS
From
CHF 235.00*
Draining racks, PE-coated wire
From
CHF 199.70*
Draining racks LaboPlast®, PVC, with drain channel
From
CHF 318.00*
Draining racks LaboPlast®, PVC
From
CHF 276.00*
Draining racks, ABS
From
CHF 222.60*
LLG-Draining racks, PE-coated wire
From
CHF 69.70*
Draining racks PVC
From
CHF 318.00*
Draining racks, HDPE-coated steel wire
From
CHF 204.00*
Similar products
The rods can be replaced and their positions can be changed. The extension can only be used with the rods of 100 mm length.Length 150mm only applicable with length 100mm.
Wall mounting, with wide draining trough. Pegs can be inserted as required. Peg holes are sealed at the rear to prevent water leakage penetrating the wall behind.Supplied with 72 pegs (15mm diameter, 95mm long), 11 small pegs (6mm diameter, 95mm long) drain tubing and fittings for wall mounting.Dimensions (L x W x H): 450 x 110 x 630 mm
Wall or bench mounting. With drip channel and plastic covered feet.
The stable rods are individually placed into the holes of the draining rack and are clicked into place. Their positions can be changed at any time.Scope of supply:Draining rack incl. wall mounting set (screws, dowels), removable drain channel incl. drainage connection and drain tube
The stable rods are individually placed into the holes of the draining rack and are clicked into place. Their positions can be changed at any time.Scope of supply:Draining rack incl. wall mounting set (screws, dowels)
A space-saving and practical solution for drying and storing fragile, frequently used labware. This rack can be placed where it is needed, while a stable base ensures a secure stand.Sturdy, easy-to-clean plastic3 different sizes of pegs can be moved and repositioned to hold a variety of laboratory vesselsSome models are suitable for wall mounting due to suspension eyes (fixing material not included)With drain channel
Wall or bench mounting for 50 reagent bottles and 5 flasks.With drip channel and plastic covered feet.Dimensions (L x W x H): 360 x 130 x 650 mm.
The draining rack is easy and flexible to set down on a table or working surface. Two large supports with wide bases ensure sufficient stability. Since both sides of the draining board can be used, it provides twice the hanging space. The collecting pan can simply be removed for emptying.
Holds up to 90 pieces of labware on 18 x 127 mm pins and 72 x 76 mm pinsEasily accessible and removable drainage panWall or bench mounting
