Accessories for sprayers
Product number:
7619215
Manufacturer:
Lenz-Laborglas GmbH & Co. KG
Packaging information:
Weight:
0.034 kg
Description
Properties
| Description: | Sprayer head for test tubes |
|---|---|
| Ground size: | NS19/26 |
| Manufacturer Article Number: | 05471205 |
| Material: | DURAN® tubing |
| Nominal capacity: | 12 ml |
| UNSPSC: | 41-12-00-00 |
Skip product gallery
UV irradiation system BIO-LINK
From
CHF 2,562.00*
UV analysis lamp
From
CHF 495.00*
Test tube sprayers, DURAN® - tubing
From
CHF 89.60*
Special atomiser, with rubber blowball
From
CHF 152.00*
Test tube atomiser, glass
From
CHF 130.00*
Spray box with fan
From
CHF 3,284.00*
Chromatography sprayer SG e1
From
CHF 175.00*
Similar products
Compact and powerful, ideal for a broad range of applicationsPrecise measurement and control technology, non-ageing UV sensorsChoice for irradiation parameter energy or timeEasy operation: Programme memory, storage of the last parameters, programme resumes after opening of the door, auto-restart after power failureSecure and stable construction, very easy to useEasy exchange of the UV tubes for wavelength changeDimensions (W x D x H)Housing:350 x 360 x 305 mmInterior:260 x 330 x 145 mmOther models available on request.
Analysis lamp with two separately switchable UV tubes of high radiation intensity. The UVA tube produces long-wave radiation at 365 nm and the UVC tube short-wave radiation at 254 nm. Ideal for chemical-analytical applications and for hygiene monitoring.Please order table stand separately.
Made of DURAN® - tubing. Consists of a test tube with NS 14/23 or 19/26 joint neck, sprayer head, clamp and rubber bulb.
With rubber blowball for nebulising reagents. Can be connected to other compressed air supplies.
Glass atomiser for nebulising small amounts of reagents. Atomiser can be inserted in a 12ml test tube with a ground joint and held in position with a spring clip.
For spraying TLC plates with aggressive media. Housing made of acid-resistant PVC for plates up to 200 x 200 mm. Low-noise extraction fan supplies 400 m³/h. The exhaust tube leads upwards and can be connected to NW 100 extraction tubing. Reagent droplets are collected in a separate drip tray. Size (W x D x H) 620 x 610 x 580 mm.
Spraying with powerful and quiet pump.The finest spray is produced even when the battery power is low. Liquids, up to the viscosity of light oil, can be finely sprayed at the touch of a button. Particle diameter 5µm to 10µm with a throughput of 20ml/min. based on water. The reservoir bottle for the spray reagent is made of borosilicate glass. The bottle is screwed into the high-grade PTFE nozzle and can be changed in seconds. With quick-charging dock as a storage base. Overload protection enables continuous storage of the sprayer in the charging station. Supplied with battery, battery charger, bottle and nozzle.