Accessories for turbidity meters Turb® 430
CHF 465.00*
Content:
1
3 Available. Delivery time: 5-7 workdays
Product number:
6228314
Manufacturer:
Xylem Analytics Germany (WTW)
Packaging information:
Length:
199 mm
Width:
190 mm
Height:
90 mm
Weight:
0.405 kg
Description
| Hazardous Substance Data | |
| SDS | Link |
Properties
| Description: | Calibration kit for Turb® 430 IR (0.02-10.0-1000 NTU) |
|---|---|
| Manufacturer Article Number: | 600560 |
| Type: | Kal.Kit Turb® 430 IR |
| UNSPSC: | 47-10-15-16 |
Skip product gallery
From
CHF 2,412.00*
Accessories
Xylem Analytics Germany (WTW)
Xylem Analytics Germany (WTW)
Turbidity meter Turb® 430
The turbidity meters Turb® 430 IR acc. to DIN ISO 27027 and Turb® 430 T acc. to US EPA 180.1 meet the requirements of the nephelometric measurement at 90° stray light for drinking water with highest precision, especially in the range < 1 NTU. The measuring range comprises 0-1100 NTU/FNU with automatic measuring range switching and is therefore suitable for water analysis as well as quality control, such as gasoline, cell cultures, as well as in the food and beverage industries.The measurement and automatic 3-point calibration runs self-explanatory and menu-controlled. The calibration takes place via an AMCO Clear® standard set (0.02-10-1000 NTU). Up to 1000 data sets including sample ID numbers can be stored and later put out GLP-compliant via the PC software LSdata. The quality assurance of the measured results is supported by calibration interval setting with documentation.Scope of supply: Turbidity meter with calibration set 0.02-10.0-1000 NTU
Skip product gallery
Sedimentation cone, plastic, SAN
From
CHF 48.30*
Accessory holders for sedimentation cones, PVC
From
CHF 203.00*
Imhoff Sedimentation cones, borosilicate glass 3.3
From
CHF 104.00*
Secchi Disk
From
CHF 62.40*
Sedimentation cones, borosilicate glass 3.3
From
CHF 140.00*
Turbidity Standards
From
CHF 107.70*
Flocculation tester ET 730 / ET 740 / ET 750, bench top
From
CHF 1,850.00*
Similar products
Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.
Imhoff pattern, solid grey PVC. Stable design.
Manufactured from borosilicate glass 3.3 according to sedimentation tests according to DIN 12672 standard. Featured with volume graduation of 1000 ml. Volume graduations and inscriptions are printed with white enamel.
For determining the depth of visibility and light permeability of water. Sturdy design made of strong, hard-wearing plastic. Lead weight for better lowering. The approx. 15 cm high rod is fitted with an eyelet for fastening the lowering engine. The lowering line is marked in intervals of 100 cm with figures from 1 to 10 and in between additionally with line markings each 50 cm for better reading of the depth of visibility while the disk is being lowered.Lowering line, please order separately.
Imhoff pattern. DIN 12672. Graduations and inscriptions in contrasting white enamel. Ring mark at 1000ml.* No subdivisions from 100 to 1000 ml.
Highly accurate turbidity standards composed of suspended microspheres, suitable for Instrument calibration and control of all turbidity meters. Stable, shelf life of 2 years (from Date of Manufacturing). NIST traceable, US EPA approved and tested in compliance with ISO 7027. HDPE bottles of 100 ml.Two ranges available:Ratio range for Ratio Turbidity Measuring instruments (measure of the scattered light from the sample at a 90° angle from the incident light, plus at additional angles (several detectors)Non Ratio for Non Ratio Turbidity Measuring instruments will measure the scattered light from the sample at a 90° angle from the incident light (one detector)
Designed for efficiency testing of flocculation or precipitation agents.For use in laboratories. Model ET 730 portableIlluminated back panel for glare-free observation of the samplesModels ET 740 and ET 750 with continuously variable stirring speedSpeed of ET 730 can be adjusted to 20, 40, 50, 100 and 200 min-1Timer feature and digital displayHeight adjustment of the stirring blades during operationFor beakers with 1000 to 1500 ml volume, tall and low formSpecificationsSpeed controlAL30:
AL40 + AL50:20, 40, 50, 100, 120 min-1
10 ... 300 min-1 (stepless)TimerAL30:
AL40 + AL50:0 ... 30 minutes (continuous)
0 ... 999 min or 0 ... 99 h (continuous)Power Supply:100 ... 240 V, 50/60 Hz