Accessory holders for sedimentation cones with stopcock, PVC
CHF 212.00*
Content:
1
Delivery according to order confirmation
Product number:
9882103
Manufacturer:
Behr Labor-Technik GmbH
Packaging information:
Length:
600 mm
Width:
211 mm
Height:
85 mm
Weight:
1.343 kg
Description
Imhoff pattern, solid grey PVC. Stable design.
Properties
| Manufacturer Article Number: | B00179003 |
|---|---|
| No. of sedimentation cones: | 2 |
Skip product gallery
From
CHF 48.30*
From
CHF 140.00*
Accessories
Kartell S.p.A.
Kartell S.p.A.
Sedimentation cone, plastic, SAN
Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.
H. & K. Starke GmbH
H. & K. Starke GmbH
Sedimentation cones, borosilicate glass 3.3
Imhoff pattern. DIN 12672. Graduations and inscriptions in contrasting white enamel. Ring mark at 1000ml.* No subdivisions from 100 to 1000 ml.
Skip product gallery
From
CHF 83.40*
Other customers also bought
Kartell S.p.A.
Kartell S.p.A.
Sedimentation cones, accessory stand, Acrylic/PP
Acrylic/PP. To hold two Imhoff sedimentation cones. Compact and easy to transport even when fully loaded.
Skip product gallery
Sedimentation cone, plastic, SAN
From
CHF 48.30*
Accessory holders for sedimentation cones, PVC
From
CHF 203.00*
Imhoff Sedimentation cones, borosilicate glass 3.3
From
CHF 104.00*
Secchi Disk
From
CHF 62.40*
Turbidity meter Turb® 430
From
CHF 2,412.00*
Sedimentation cones, borosilicate glass 3.3
From
CHF 140.00*
Sedimentation unit set, Nalgene®, PC
From
CHF 196.30*
Similar products
Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.
Imhoff pattern, solid grey PVC. Stable design.
Manufactured from borosilicate glass 3.3 according to sedimentation tests according to DIN 12672 standard. Featured with volume graduation of 1000 ml. Volume graduations and inscriptions are printed with white enamel.
For determining the depth of visibility and light permeability of water. Sturdy design made of strong, hard-wearing plastic. Lead weight for better lowering. The approx. 15 cm high rod is fitted with an eyelet for fastening the lowering engine. The lowering line is marked in intervals of 100 cm with figures from 1 to 10 and in between additionally with line markings each 50 cm for better reading of the depth of visibility while the disk is being lowered.Lowering line, please order separately.
The turbidity meters Turb® 430 IR acc. to DIN ISO 27027 and Turb® 430 T acc. to US EPA 180.1 meet the requirements of the nephelometric measurement at 90° stray light for drinking water with highest precision, especially in the range < 1 NTU. The measuring range comprises 0-1100 NTU/FNU with automatic measuring range switching and is therefore suitable for water analysis as well as quality control, such as gasoline, cell cultures, as well as in the food and beverage industries.The measurement and automatic 3-point calibration runs self-explanatory and menu-controlled. The calibration takes place via an AMCO Clear® standard set (0.02-10-1000 NTU). Up to 1000 data sets including sample ID numbers can be stored and later put out GLP-compliant via the PC software LSdata. The quality assurance of the measured results is supported by calibration interval setting with documentation.Scope of supply: Turbidity meter with calibration set 0.02-10.0-1000 NTU
Imhoff pattern. DIN 12672. Graduations and inscriptions in contrasting white enamel. Ring mark at 1000ml.* No subdivisions from 100 to 1000 ml.
Transparent, shockproof, with easily readable white graduations. Sedimentation and centrifuge tests for sludge quality are used in the analysis of the active sludge deposition process.Scope of delivery: Jar and cover (PC), scoop (PP), 10 x 15 ml conical centrifuge tubes (PC), with caps (PP), manual and data sheet.
