Autoclave deodorant Anabac® natural
CHF 109.00*
Content:
50
Delivery according to order confirmation
Product number:
6318004
Manufacturer:
interscience
Packaging information:
Weight:
0.1 kg
Description
Anabac® natural is an autoclave deodorant with 100% natural perfume, obtained from natural extracts. The ball dissolves without residue during autoclaving and the perfume is released. Autoclaving processes are not affected.
- Compatible with all autoclaves
- Biodegradable
- ECOCERT certified according to the COSMOS standard
| Hazardous Substance Data | |
| SDS | Link |
Properties
| Description: | Natural coconut fragrance |
|---|---|
| Manufacturer Article Number: | 321.100 |
| Type: | Coconut |
Skip product gallery
Indicator tape for steam, hot air and gas sterilisation
From
CHF 17.00*
Bowie-Dick Test Pack
From
CHF 99.90*
Steam Indicator Strips
From
CHF 14.40*
Autoclave deodorant Anabac®
From
CHF 154.10*
Multiparameter Indicator 3M™ Comply™
From
CHF 131.80*
Chemical integrator for steam 3M™ Attest™ Type 5
From
CHF 122.00*
Screw Cap GL 45 with temperature probe holder, DURAN®
From
CHF 150.00*
Screw Cap GL 45 thermocouple holder, DURAN®
From
CHF 195.00*
Similar products
Crepe paper, adhesive. With indicator. Colour changes according to DIN EN ISO 11140-1. Rolls of 50 m.
These Bowie-Dick Test Packs are pre-assembled, single use test packs designed to evaluate the performance of the air removal system of pre-vacuum assisted sterilisers in compliance with EN 285 and operating at 134 °C and 3.5 minutes. An indicator sheet printed with water based, non-toxic chemical indicator is placed in the center of each pack. The uniform colour change of the indicator after steam sterilisation indicates that all air was removed and replaced by steam. The backside of the indicator sheet contains fields to be filled out and it can be kept as a permanent record for traceability purposes.Disposable, pre-assembled and ready to use test packsDesigned for STEAM sterilization at 134 °C - 3.5 minutes.Clean and accurate indicator color changeIndicator sheet can be kept as a permanent recordValidated for 4 kg and 7 kg sterilisation loadManufactured in absence of lead or other heavy metals
Class 4 Multi-Variable Steam Indicator StripsClass 4 Multi-Variable Steam indicator strips are designed to be used in steam sterilizers operating at 134 °C -3.5 minutes. The indicator strips can be used in every pack and will provide assurance of steam penetration into the packs.The water based and non-toxic chemical indicator in compliance with ISO 11140-1 will show a clear and accurate color change from blue to black after successful steam sterilization. PMSSteriTest indicator strips are cost effective and can be divided into two separate pieces for more economical use.Dual Strip designDesigned for STEAM sterilization at 134 °C - 3.5 minutes.Water based, non-toxic chemical indicator comply to ISO 11140-1Clear and accurate color change from blue to blackManufactured in absence of lead or other heavy metalsClass 6 Emulating Steam Indicator StripsClass 6 Emulating Steam indicator strips are designed to be used in steam sterilizers operating at 121 °C -15 minutes and 134 °C -3.5 minutes. The cycle verification indicators can be used in every pack and will provide assurance of steam penetration into the packs and presence of all critical parameters of steam sterilization cycle. The water based and non-toxic chemicalindicator in compliance with ISO 11140-1 will show a clear and accurate color change from blue to lilac after successful steam sterilization.Single Strip designDesigned for STEAM sterilization at 134 °C - 3.5 minutes.Designed for STEAM sterilization at 121 °C - 15 minutes.Water based, non-toxic chemical indicator comply to ISO 11140-1Clear and accurate color change from blue to lilacManufactured in absence of lead or other heavy metals
Laboratories are very concerned about hygiene, cleanliness and comfort in the workplace. Try Anabac® autoclave deodorant balls to improve the working environment in the laboratory. These autoclave deodorant balls bring a discrete scent that speaks of cleanliness.
Class 4 indicators with endpoint reaction. With chemical coating, change their colour when the sterilization cycle is successfully completed. Indicator strips for steam sterilization or ethylene oxide sterilization.Steam sterilization colour change from yellow to blackEO sterilization colour change from red to greenEconomical due to the possibility of cutting in halfComplies with EN ISO 11140-1
Internal batch control monitor for steam sterilisation.ISO 11140-1:2014 Type 5 Integrating indicatorSimple evaluation within seconds using moving front ink technology with illuminated areas for ACCEPT (green) and REJECT (red)For use in all steam sterilisation cycles between 121 and 135 °CImproved efficiency with a scannable 2D barcodeShelf life 3 years
The DURAN® temperature probe holder GL 45 consists of a stainless steel holder that is permanently fitted into a blue DURAN® polypropylene GL 45 cap. The holder will accept the 6.0 mm metal temperature measuring probes that are commonly used in laboratory autoclaves and sterilizers.ApplicationsRoutine sterilization /autoclave cycles"Loaded Chamber heat penetration" tests during Performance Qualification (PQ)Performance tests after autoclave maintenance or repairFeaturesUsable with DURAN® original GL 45 laboratory bottles (1000 ml or less).The depth of the probe can be adjusted to suit the bottle sizeAdjustable ferrule suitable for 6.0 mm diameter probesRetrace code for product traceability and downloadable certificateEasy positioning of the sensor in the middle of the bottle
The DURAN® Screw Cap GL 45 thermocouple holder consists of a holder fitted into a blue DURAN® polypropylene GL 45 cap that accepts up to three separate thermocouple wires used in autoclaves or sterilizers.Applications"Loaded Chamber heat penetration" tests during Performance Qualification (PQ)Routine sterilization /autoclave cyclesPerformance tests after autoclave maintenance or repairFeaturesUsable with DURAN® original GL 45 laboratory bottles (1000 ml or less).The 240 mm PTFE tube may be cut to lengthSuitable for holding up to three separate thermocouple wires (Conductor sizes 1/0.3 mm, 1/0.5 mm or 7/0.2 mm)Retrace code for product traceability and downloadable certificate