Bases for automatic burettes, Dr. Schilling pattern
Product number:
7018353
Manufacturer:
BRAND GMBH + CO.KG
Packaging information:
Length:
118 mm
Width:
108 mm
Height:
55 mm
Weight:
0.032 kg
Description
Properties
| Description: | For 500 ml bottles |
|---|---|
| For: | Ø 74 - 76 mm |
| Manufacturer Article Number: | 23725 |
| Material: | HDPE |
| UNSPSC: | 41-11-56-02 |
Skip product gallery
Burettes, with straight stopcock, borosilicate glass 3.3, class AS
From
CHF 67.30*
Burette clamp
From
CHF 21.00*
Automatic burettes acc. to Schilling pattern, blue graduation, DURAN®
From
CHF 100.00*
Automatic burettes, schilling pattern, borosilicate glass 3.3/LDPE
From
CHF 104.00*
Burettes, with lateral valve cock, borosilicate glass 3.3, class AS
From
CHF 132.80*
Automatic burettes with splinter protection, Schilling pattern, borosilicate glass 3.3
From
CHF 111.00*
Automatic burettes, glass, Schilling pattern, boro 3.3, class B
From
CHF 105.40*
Burettes, with straight valve cock, borosilicate glass 3.3, Class AS
From
CHF 218.70*
Micro burettes, Bang pattern, borosilicate glass 3.3, class AS, with straight needle valve stopcock
From
CHF 531.10*
Micro burettes, Bang pattern, borosilicate glass 3.3, class AS, with lateral valve stopcock
From
CHF 572.00*
Similar products
With class AS, conformity certified, with batch identification, blue graduations, DIN EN ISO 385. PTFE spindle.
Polypropylene. Bosshead supplied with two adapters so that the clamp can fit on to support rods having diameters 8 to 14mm. Stainless steel spring loaded centre arm holds burette firmly against the two outer arms and is protected by rubber grips. Graduations and meniscus are visible at all times. Suitable for all burettes.
Fast flow burette with 500 ml plastic reservoir bottle (up to 10 ml) or 1000 ml (from 15 ml). Schellbach stripe and graduation in high contrast blue enamel.
Described as automatic burettes with fast titration and practical usageEspecially suitable for field analysis where there is a risk of breakingThe entire system consists of a burette tubing with automatic zeroing system together with a valve stopcock, a reservoir bottle and a bottle standRapid filling by squeezing the bottle and fast titration by valve stopcockInscriptions and graduations are printed with blue enamel which is specially designed for glass useClear burettes are manufactured with schellbach stripe10 ml burette has a polyethylene reservoir bottle of 500 ml volume whereas 25 and 50 ml burettes are used with bottles of 1000 ml volume
All BLAUBRAND® burettes are supplied with batch number and an accompanying batch certificate in the original packaging. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Blaubrand®DIN EN ISO 385DE-M markingGraduations and inscriptions in high contrast blue enamelWith Schellbach stripeCalibrated to deliver (EX)
Burette according to Dr. Schilling with splinter protection, with Schellbach stripes, automatic zero point extraction and Bürkle dosing device. The glass burette is covered with a plastic sheet which increases the tensile strength and serves as splinter protection. The probability that the burette breaks is reduced compared to conventional burettes and even in case the burette breaks, no dangerous splinters will be produced. The dosing device allows precise dosage via the pushbutton or via the micro-screw as well as precise dispensing via a fine spout tip.With splinter protectionAdjusted to ExShatterproof, resistant to chemicalsExact spout tip, fine droplet formationParts in contact with the medium: PE, natural rubber, PP, Borosilicate glass
Silberbrand. Tolerances to class B, DIN EN ISO 385. Borosilicate glass 3.3 burette. PVC filling tube and silicone outlet tubing. LDPE reservoir bottle with HDPE base. Brass / PP micrometer screw. Graduations and inscriptions are in highly contrasting black enamel. With Schellbach stripes. Squeezing of bottle allows rapid filling. Fine titration is easy using the micrometer screw. Coarse titration is achieved by removal of the micrometer screw and using the push button. Calibrated to deliver (EX).
All BLAUBRAND® burettes are supplied with batch number and an accompanying batch certificate in the original packaging. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Blaubrand®DIN EN ISO 385DE-M markingMarks and inscriptions in high contrast blue enamelRing graduations at major subdivisionsSchellbach stripeCalibrated to deliver (TD, EX)
All Blaubrand® burettes are delivered with batch number and one batch certificate included per manufacturer's pack. Also available with individual works, USP or DAkkS calibration certificate on request.DE-M markingDIN EN ISO 385Calibrated to deliver (TD, EX)Schellbach stripeWith PTFE spindle (PTFE key in intermediate stopcock)
All Blaubrand® burettes are delivered with batch number and one batch certificate included per manufacturer's pack. Also available with individual works, USP or DAkkS calibration certificate on request.DE-M markingDIN EN ISO 385Calibrated to deliver (TD, EX)Schellbach stripeWith PTFE spindle (PTFE key in intermediate stopcock)