Booster horns and stepped horns for SONOPULS Ultrasonic homogenisers, TiAl6V4
CHF 525.00*
Content:
1
Delivery according to order confirmation
Product number:
9650156
Manufacturer:
Bandelin electronic
* Specifications refer to the packaging unit
Booster horns, stepped horns for connection of interchangeable sonotrodes (probes). Further booster horns are available on request.
| For: | HD 4100 |
|---|---|
| Manufacturer Article Number: | 3731 |
| Type: | Stepped horn SH 100 G |
| Ø mm: | 13 |
Similar products
Suitable for homogenising, desagglomerating, emulsifying, suspending, accelerating chemical reactions or disruption of cells, bacteria, fungi or spores. The devices of the SONOPLUS 4000 series are characterised by optimised process times and quickly available reproductive results.LC display for amplitude, pulse level, time and powerPulse mode, AMPLICHRON®-circuitData memoryBatch mode/sequencingTemperature display and measurementRemote control via PC RS 232Interference suppressionAlso available as medicine product according to the guideline for in-vitro-diagnostica 98/79/EG.For volumes from 0.5 to 100 ml. Ready-to-operate set for volumes from 0.5 to 20 ml consisting of:HF generator GM 4200Ultrasonic converter UW 50Titanium probe TS 102, diam. 2 mmFurther Titanium probes with diam. 3 mm, 4.5 mm and 6 mm available on request.HF generator
Dimensions (W x D x H):GM 4200
150 x 335 x 220 mmConverterUW 50Dimensions (diam. x L):45 x 175 mmUltrasonic nominal power:max. 50 WStand and vessel are not included.
Titanium, approx. length 100 mm.* with glass flow vessel GD14K.
Titanium sonotrodes.For connection to stepped horns/booster horns.
For correct and variable positioning of the ultrasonic transducers.Suitable for direct and indirect sound reinforcementCan be used with and without LS 40 noise protection boxCommercially available sockets can be mounted on stand rod (d=16 mm)Material base and rod: stainless steel
MS0.5 - MS10: Sonotrodes made of titanium, approx. length 80 mm.T1: Timer from 00:00 to 99:59 (min:sec).
For manual operation or for stand use, frequency 30kHz, automatic frequency tuning system, amplitude adjustable 20% to 100%, pulse 0 to 100%, dry running protected, in portable case, with mounting for stand STH-16 and mounting tools, 230V a.c.
Digital ultrasonic processor, 200 watts, for handheld and stand-mounted use, frequency 26kHz (auto-scan), amplitude 20-100%, pulse 10-100%, titanium horn Ø10mm (max. amplitude at horn 70µm), colored touch-screen, amplitude or power control, countdown (timer): 0.1sec to 99 days, shutdown when final energy input reached (Ws, Wh, kWh), autom. Calibration of the amplitude-dependent idle power, data recording: amplitude, power, time, temperature on internal SD/USB ComboCard (1GB), display and remote control via browser on PC/MAC without software installation, remote control via PLC, with temperature sensor, temperature indication: °C/°F (-50°C to 200°C), temperature monitoring, dry running protected, sample illumination, anti-bacterial plastic housing, simplified exchange sonotrodes, power supply 100-240V~, 50-60Hz, IP41 grade, set weight: 1300g, Carrying case incl. fixture for stand STH-12 and 3m network cable
Sonotrodes made of titanium. With M6x0.75 male thread. Autoclavable.Sonotrodes S26d2D and S26d7D with seal for closed systems for use with flow cell reactor.