Skip to main content Skip to search Skip to main navigation
Menu

Bossheads, zinc die casting, with brass screws

Description
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.

Properties
Manufacturer Article Number: 2201
Material: Die-cast zinc
Max. Ø rod: 16 mm
Type of coating: Powder-coated
Skip product gallery

Other customers also bought

Carl Friedrich Usbeck KG

Carl Friedrich Usbeck KG
Swivelling bosshead
Swivelling. To DIN 12895 Part 1. Zinc die casting powder-coated .
From CHF 19.00*

BOCHEM Instrumente GmbH

BOCHEM Instrumente GmbH
Bossheads, aluminium, angle 90°
DIN 12895. With thumb screw M8/M10.
From CHF 14.20*
Skip product gallery

Similar products

Bosshead
Malleable cast iron with lacquered chrome finish. DIN 12895. With lug screw.
From CHF 13.90*

Clamps
To DIN 12894. B form. Zinc die casting, powder-coated. With round jaws.
From CHF 12.80*

Burette holders
Aluminium, powder-coated. With roller grips and bosshead for retort stand rods.
From CHF 37.20*

Cross bosshead, cast steel
Chrome plated cast steel. Suitable for frame works and fixing perpendiculars. Can be moved vertically and horizontally along the rods.
From CHF 15.70*

Table clamps for rods, malleable cast iron, coated
For table tops with a thickness of max. 55mm. Rod diameter 12/13mm.
From CHF 85.90*

Bossheads, Zinc die casting, with steel screws
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
From CHF 9.40*

Universal clamp, with cork
Prongs with cork.
From CHF 26.10*

Support rods, Stainless steel 1.4305
Ground surface. Ø 12 mm.
From CHF 10.00*

Rectangular retort stand bases, enamel, coated steel plate
Highly stable laboratory stand due to the steel rectangular base which is stove enamel coated. With an M10 threaded hole in the middle of one short side. Rubber support feet prevents the stand from sliding. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".
From CHF 40.40*

Support rings
18/10 Stainless or zincked. With or without bosshead.
From CHF 16.30*
Skip product gallery

Customers also bought

VITsafe™ safety wash bottles, wide-mouth, PP/LDPE
LDPE or PP Bottles, PP spray tube. Safer due to the durable safety imprint in accordance to Directive (EC) No. 1272/2008 (GHS), as well as with all important information: Material name in German, English, French and Spanish, Chemical formula, CAS No., hazard pictogram, signal word, Risk phrases (H phrases), safety phrases (P phrases), as well as NFPA Code. Precise spray jet and optimised medium backflow through the continuous and finely drawn tip of the spray tube. Practically no leakage or dripping with the VENT-CAP screw cap, the design of which prevents almost all static overpressure.
From CHF 12.00*

Laboratory bottles, DURAN®, with screw cap
With easy to read scale and large labelling field for easy marking, in fired-on, highly durable white ceramic. 10 ml and 25 ml bottles with specially shaped glass rim for better pouring (eliminating the need for an additional pouring ring). ISO 4796-1 compliantWith Retrace code Neutral glass / Type I glass in compliance with USP/EP and JPAutoclavableWith blue PP screw cap and pouring ring.
From CHF 5.70*

Disposable Syringes Omnifix® Solo, 3-piece, Luer slip
Material: Polypropylene, Plunger backstop: PolyisoprenePlunger backstop with smooth double sealing ring for slow aspiration and injection of small sample quantitiesHighly transparent barrel with black graduations (in ml) for ideal readability, permanent markingSafe plunger backstop for easy aspiration to the maximum volumeInside siliconizedLuer Slip to put on the needle, centric or eccentricLatex- and PVC-freeSterile, single packedManufactured according to EN ISO 7886-1
From CHF 16.00*

Clamps
To DIN 12894. B form. Zinc die casting, powder-coated. With round jaws.
From CHF 12.80*

Funnels, PP
Transparent. Rapid flow due to a steep 60° angle. Practical handle with loop for hanging. Food-safe product according to regulation (EU) No. 10/2011.
From CHF 0.80*