CHROMABOND® HR-P, glass column
CHF 564.80*
Content:
30
Delivery according to order confirmation
Product number:
4003506
Manufacturer:
Macherey-Nagel GmbH & Co. KG
Packaging information:
Weight:
0.28 kg
Description
Polystyrene-divinylbenzene adsorbent resin for SPE
Basic material: Highly porous polystyrene-divinylbenzene copolymer specific surface 1200 m2/g.
Particle size 50-100 µm very high binding capacity, up to 30 % of adsorbent weight.
Recommended application: aromatic compounds, phenols from water, nitroaromatics from water, pesticides from water, PAHs from oil
Basic material: Highly porous polystyrene-divinylbenzene copolymer specific surface 1200 m2/g.
Particle size 50-100 µm very high binding capacity, up to 30 % of adsorbent weight.
Recommended application: aromatic compounds, phenols from water, nitroaromatics from water, pesticides from water, PAHs from oil
Properties
| Base material: | PS/DVB copolymer |
|---|---|
| Endcapped: | No |
| Filter element material: | Glass fiber (GF) |
| Manufacturer Article Number: | 730111G |
| Package: | 30 pcs |
| Package capacity: | 30 pcs, 30 st |
| Particle size: | 50 ... 100 µm |
| Particle type: | Fully porous |
| UNSPSC: | 23-15-18-16 |
Skip product gallery
CHROMABOND® vacuum manifolds and accessories
From
CHF 57.40*
CHROMABOND® HR-X
From
CHF 95.60*
CHROMABOND® QuEChERS extraction buffer mixes / clean-up mixes
From
CHF 191.40*
CHROMAFIX® Dry
From
CHF 201.30*
CHROMAFIX® PS
From
CHF 363.10*
CHROMABOND® PS-OH- / PS-H+
From
CHF 169.50*
Empty columns CHROMABOND®, PP
From
CHF 104.10*
Similar products
For simultaneous preparation of up to 12 or 24 samples, replacement parts and accessories for special applications.Vacuum manifold complete consists of: glass cabinet with lid and lid gasket, removable needles on lower side of lid, vacuum gauge, control valve, valves and caps, variable rack.
Spherical, hydrophobic polystyrene-divinylbenzene resin for SPEHydrophobic polystyrene-divinylbenzene copolymer pH stability 1 to14. High-purity material with highest reproducibility and lowest blank values due to a novel manufacturing process, spherical particles 85mm; pore size 55 to 60Å. Very high surface 1000m²/g; capacity 390mg/g (caffeine in water). Excellent recovery rates especially for the enrichment of pharmaceuticals/active ingredients due to the spherical structure of the particles, very homogeneous surface, and optimised pore structure.Recommended applications: pharmaceuticals/active ingredients from tablets, creams and water/waste water, drugs and pharmaceuticals from urine, blood, serum and plasma trace analysis of pesticides.Cartridges in further sizes and phases of the HR-X poduct range available on request.
QuEChERS method and pre-mixesWithin a few years after its devleopment by Anastassiades et al. the QuEChERS method has gained a leading position for determination of pesticide residues in food by GC-MS or LC-MS allowing rapid and cheap clean-up of strong matrix-contaminated samples.Standard clean-up of food samples10 g sample are homogenised with 10 ml acetonitrile. After adding the internal standard the sample is shaken with 4 g MgSO4 and 1 g NaCI and afterwards centrifuged. 1 ml of the supernantant is spiked with 25 mg CHROMABOND® Diamino and 150 mg MgSO4 and shaken again. After centrifugation the supernatant is injected into the GC/MS.Extraction mixtures for sample preparation for determination of pesticides in food samples.MACHEREY-NAGEL offers a number of individually weighed and pre-mixed buffers and extraction mixtures, specially composed for different sample matrices.Mix I and Mix II are extraction mixtures, Mix III to Mix VI are clean-up mixtures.The food samples will be extracted with either Mix I or Mix II.Afterwards they will be purified with one of the following mixtures:Mix III (samples with low fat content; e.g. apples, strawberries),Mix IV (moderate content of chlorophyll and carotinoids; e. g. carrots, lettuce),Mix V (high content of chlorophyll and carotinoids; e. g. bell peppers, spinach),Mix VI (high fat content; e. g. avocados).Every mix is prepacked in a 15 ml centrifuge tube. Pack of 50 pieces.
Special phase for drying organic samplesBasic material: Sodium sulfate.Recommended application: removal of traces of water from organic solutions.
The innovative cation exchanger offers:mixed-mode SPE phase with distinct cation exchange and RP properties excellent enrichment of basic analytesmodern support polymer with optimised pore structure and large specific surfacegood reproducibility, reliable and cost-efficient analysesmore aggressive washing procedures for matrix removal possiblecleaner samples and protection of analytical HPLC and GC instrumentationquantificationof analytes from heavily contaminated sampleslower limits of detection also for critical matrices... the perfect fit for basic analytes in comination with CHROMABOND® HR-X
The innovative cation exchanger offers:mixed-mode SPE phase with distinct cation exchange and RP properties excellent enrichment of basic analytesmodern support polymer with optimised pore structure and large specific surfacegood reproducibility, reliable and cost-efficient analysesmore aggressive washing procedures for matrix removal possiblecleaner samples and protection of analytical HPLC and GC instrumentationquantificationof analytes from heavily contaminated sampleslower limits of detection also for critical matrices... the perfect fit for basic analytes in comination with CHROMABOND® HR-XSPE phases for polymer-based RP and ion chromatographyBase material: high-purity polystyrene-divinylbenzene copolymers (PS/DVB) pore size 100 Å, paricle size 100µm. Verly low degree of swelling, thus very well suited for chromatography. Different modifications for different applications from elimination of nonpolar compounds up to removal of specific polar comonents.Recommended application:Removal of interfering compounds improves chromatographic separtions, if the interfering components overlap with the analyte in the chromatogramimproves lifetime of the chromatographic column, since interfering components can irreversibly block the column packing
Empty CHROMABOND® column (PP) for SPE, one PE-filter element is already inserted in the column.