Coil condensers, DURAN® tubing, with glass olives
CHF 196.00*
Content:
1
Delivery according to order confirmation
Product number:
6240342
Manufacturer:
Lenz-Laborglas GmbH & Co. KG
Packaging information:
Length:
589 mm
Width:
107 mm
Height:
67 mm
Weight:
0.452 kg
Description
Made of DURAN® tubing. Acc. to DIN 12593 and in addition to DIN standard. With jacketed cooling coil. Water connection with glass olives.
Properties
| Connection: | Glass olive |
|---|---|
| Cooling surface: | 650 cm² |
| Ground size: | NS29/32 |
| Length jacket: | 400 mm |
| Manufacturer Article Number: | 05250404 |
| Material: | DURAN® tubing |
| Standard: | 12593 |
| Type of construction (glass components): | Intensive condenser |
| UNSPSC: | 41104814 |
Skip product gallery
From
CHF 9.30*
From
CHF 37.00*
From
CHF 3.70*
From
CHF 2.00*
From
CHF 30.90*
From
CHF 55.20*
From
CHF 36.30*
From
CHF 19.00*
From
CHF 4.80*
From
CHF 9.50*
From
CHF 6.30*
Accessories
Otto Fahsig GmbH
Otto Fahsig GmbH
Gas leak detection fluid, bottle
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.
Lenz-Laborglas GmbH & Co. KG
Lenz-Laborglas GmbH & Co. KG
Joint clips for conical joint sleeve connections, stainless steel, with set screw
For tapered ground joints as outlined belowWith or without set screwFor tapered ground joints as outlined below
H W S Hans W. Schmidt
H W S Hans W. Schmidt
Ground joint clips for sleeve connections, wire, Chrome-nickel steel
Chrome-nickel steel.
Bohlender GmbH
Bohlender GmbH
Sleeves with ribs, PTFE
For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.
Buddeberg GmbH
Buddeberg GmbH
BUDDE - joint grease
For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Engler distilling flasks, DURAN®, ASTM, with beaded rim
Uniform wall thickness distribution makes these flasks ideal for heating applications and distillations. The flasks are manufactured from a hydrolytically resistant borosilicate glass 3.3, which is defined as "Type I, Class A" in the ASTM Specification E 438.ASTM D86DIN EN ISO 3405
Dr. Dietmar Glindemann
Dr. Dietmar Glindemann
PTFE sealing rings for jointed glassware
An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage
J.P. Pöllath
J.P. Pöllath
Joint grease, K.W.S
Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for conical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
Bohlender GmbH
Bohlender GmbH
Sleeves, cone joint, PTFE
With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for spherical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
Skip product gallery
Coil condensers, DURAN® tubing, with plastic olives
From
CHF 153.00*
Spiral condensers, DURAN® tubing, with PP olives
From
CHF 115.00*
Condensers acc. to Allihn with GL threads, DURAN® tubing
From
CHF 93.60*
Condensers, ground glass joint, Allihn, borosilicate glass 3.3
From
CHF 62.70*
Condensers acc. to Dimroth, with GL threads, DURAN® tubing
From
CHF 134.00*
Air condensers without jacket, DURAN® tubing
From
CHF 22.20*
Condensers, ground glass joint, Liebig, borosilicate glass 3.3, with PP olives
From
CHF 41.10*
Condensers, ground glass joint, Allihn
From
CHF 64.90*
LLG-Condenser acc. to Liebig, borosilicate glass 3.3, PP olive
From
CHF 37.40*
Spiral condensers, borosilicate glass 3.3, with glass olive
From
CHF 43.50*
Similar products
Made of DURAN® tubing. Acc. to DIN 12593 and in addition to DIN standard. With jacketed cooling coil. Water connection with GL 14 thread with two threaded plastic olives.
Made of DURAN® tubing. For cooling condensates. Water connections with GL14 threads with two threaded plastic olives.
Made of DURAN® tubing. Acc. to DIN 12581 and in addition to DIN standard. For condensing vapours. With NS cone and socket water connection GL14 threads with two threaded plastic olives.
Borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12581. Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing. The side arms accept tubings with 8/9mm bore size.
Made of DURAN® tubing. Acc. to DIN 12591 and in addition to DIN standard. With NS cone and socket. Water connection GL14 threads with two threaded plastic olives.
Made of DURAN® tubing. For easily condensable vapours. With NS cone and drain ring.
Made of borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12576. Polypropylene side arm has a screw thread connector for easy and safe fitting of the tubing. The side arms accept tubings with 8/9mm bore size.
Manufactured from borosilicate glass 3.3 according to DIN 12581 standard. Supplied with glass side arm.The side arms accept tubings with 8/9 mm bore size.
For condensing vapours. Water connection with PP olives. With standard ground cone and socket. Acc. to DIN 12576.
Made of borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12592. The side arms accept tubings with 8/9 mm bore size.