Compressed air industrial stirrers BSR 64 with floor stand
CHF 4,326.00*
Content:
1
Delivery according to order confirmation
Product number:
9779165
Manufacturer:
Buddeberg GmbH
Packaging information:
Description
BSR series stirrers perform routine mixing tasks up to 200 l.
General specifications:
Basic models include:
General specifications:
- operating pressure max. 6 bar
- air consumption 800 l/min. at 6 bar
- power output 640 W at 6 bar
- clockwise rotation
- ATEX rating to Ex II 2G Ex h IIC T5 Gb
Basic models include:
- all-stainless steel housing
- continuously adjustable speed control valve
- spherical clamping device with support arm diam. 16 mm, length 200 mm
- floor stand with rod (height 1000 mm, width 600 mm) and bosshead
- plug-in connector DN 7.8
- silencer
- output shaft L 32 mm x diam. 14 mm
Properties
| ATEX certification: | Ex II 2G Ex h IIC T5 Gb |
|---|---|
| Compressed air consumption: | 800 l/min |
| Idle speed: | 300 1/min |
| Manufacturer Article Number: | 40 26446 00496 5 |
| Max. Viscosity: | 100000 mPa·s |
| Max. operating pressure: | 6 bar |
| Max. stirring capacity: | 200 l |
| Nominal torque: | 21 Ncm |
| Operating press bar: | 6 bar |
| Rated capacity: | 640 W |
| Type: | BSR 64/30-A-V |
Skip product gallery
Globe Stirrer Couplings, POM
From
CHF 170.00*
Flexible clutch
From
CHF 343.00*
Keyless chuck for overhead stirrers
From
CHF 127.60*
PLR compressed air laboratory stirrers up to 30 l for use in potentially explosive atmospheres, without tachometer
From
CHF 1,287.50*
PLR compressed air laboratory stirrers up to 30 l for use in potentially explosive atmospheres, with tachometer
From
CHF 2,451.40*
Connection couplings
From
CHF 119.50*
Magnetic Stirrer Heads Complete
From
CHF 1,398.00*
Magnetic stirrer couplings with ground joint
Price on request
Magnetic Stirrer Heads P-MRK
From
CHF 1,478.00*
Similar products
Made of POM, a plastic material with a good mechanical strength, powerful transmission of up to 300 Ncm, suitable for a speed of up to 1.200 rounds per minute, maximum misalignment of axes 10 mm. Ideal for balancing misalignment of axes between agitator and stirrer shaft, suitable for glass, metal or PTFE stirrer shafts.very low centrifugal forces due to low weightsuitable for both left and right-handed rotationno resonancesimple assembly by means of screw joints with clamp ringspivot (length 90 mm) can be shortened by the user
Required for stirring tasks using glass stirring rods. The flexible coupling compensates for any structural variances.
R 60: Only for use with EUROSTAR 20 / 40 / 60 / 100 / 200 / RW 20, excluding EUROSTAR 20 high speed digital and control.R 60.1: For MINISTAR 20 / 40 / 80 digital and control, MICROSTAR series and NANOSTAR 7.5 digital.
PLR compressed air laboratory stirrers are designed for all kinds of standard mixing tasks. The vane type, air-driven motor offers a high power density and is significantly lighter and smaller than an equivalent electric motor.General specifications:operating pressure max. 6 barair consumption 260 l/min. at 6 barpower output 200 W at 6 barclockwise rotationATEX certificationBasic models include:all-stainless steel housingcontinuously adjustable speed control valvesupport arm diam. 14 mmsnap connection for NW 5output shaft L x diam. 26 x 10 mmThe viscosity data are intended as a guideline.
PLR compressed air laboratory stirrers are designed for all kinds of standard mixing tasks. The vane type, air-driven motor offers a high power density and is significantly lighter and smaller than an equivalent electric motor.General specifications:operating pressure max. 6 barair consumption 260 l/min. at 6 barpower output 200 W at 6 barclockwise rotationATEX certificationBasic models include:all-stainless steel housingcontinuously adjustable speed control valvesupport arm diam. 14 mmsnap connection for NW 5output shaft L x diam. 26 x 10 mmThe viscosity data are intended as a guideline.
Fixed-diameter connection between motor and stirring shaft. Suitable for use in potentially explosive atmospheres (ATEX). Material no. 1.4404
Perfect combination of drive shaft with ball bearings, rotor and lower bearing made of PTFE/PEEK and a rod made of borosilicate glass. Requires little space due to compact construction. No leakage or memory effects due to non-porous, welded rotor. This rotor holds the stirrer shaft by means of three stud screws which are fixed into counterbores on the stirrer shaft. This provides optimum power transmission and secure mounting. The 6mm square drive can be fixed into the stirrer coupling or into the agitator. powerful transmission of up to 50 Ncmno grease requiredall products exposed to the medium being stirred do not contain any metalshigh speed of up to max. 1500 rpmhigh working temperatures up to +250 °C are possibleexcellent chemical resistancesafe to run dryhigh durability
Stirrer head with a permanent magnetic coupling for mixing applications under vacuum. No straight-through shaft, no shaft sealing rings required as the torque is provided contactless by magnetic force.Speed: 2500 rpmMaterial: 1.4435 (AISI 316L)Seal: FKMBearing: Ball bearing made of stainless steelDrive shaft supplied with 6 mm external square stub.
Ideal stirrer head for PTFE-jacketed stirrer shafts from BOLA. Consisting of capsuled drive shaft (stainless steel) with ball bearings, rotor and lower bearing made of PTFE/PEEK and a hollow shaft made of borosilicate glass. Requires little space due to compact construction.No leakage or memory effects due to non-porous, welded rotor. Compression fittings for safe fixing of stirrer shaft and optimum power transmission. Joint-Cone with nut (Safe-Lab) for easy locking and unlocking of the ground joint. Square size 6mm for accepting an agitator or a stirrer coupling. Insertion length of shaft 95mm. Drive shaft outside diameter 50mm.gastight stirrer head for perfect vacuumstirrer shaft's height adjustable, approx. 40mmalso suitable for shortened stirrer shaftspowerful transmission of up to 90Ncmexcellent chemical resistanceall products which are exposed to the medium do not contain any metalsno grease required / save to run dryhigh speed of up to max. 1.500rpmdrive shaft fixed for your safetyhigh durabilityeasy disassembly of all parts for cleaning