Condensers acc. to Allihn for extractors, DURAN® tubing, with plastic olives
CHF 164.00*
Content:
1
Delivery according to order confirmation
Product number:
6242774
Manufacturer:
Lenz-Laborglas GmbH & Co. KG
Packaging information:
Weight:
0.125 kg
Description
Made of DURAN® tubing. For condensing vapours. With cone, water connection with GL 14 thread and two threaded plastic olives.
Properties
| Connection: | Tubing olive |
|---|---|
| Connection size: | GL 14 |
| Cooling surface: | 100 cm² |
| Ground size: | NS29/32 |
| Length jacket: | 160 mm |
| Manufacturer Article Number: | 05226014 |
| Material: | DURAN® tubing |
| Type of construction (glass components): | Allihn condenser (bulb condenser) |
| UNSPSC: | 41104814 |
Skip product gallery
From
CHF 134.00*
From
CHF 63.80*
Other customers also bought
Lenz-Laborglas GmbH & Co. KG
Lenz-Laborglas GmbH & Co. KG
Condensers acc. to Dimroth, with GL threads, DURAN® tubing
Made of DURAN® tubing. Acc. to DIN 12591 and in addition to DIN standard. With NS cone and socket. Water connection GL14 threads with two threaded plastic olives.
Lenz-Laborglas GmbH & Co. KG
Lenz-Laborglas GmbH & Co. KG
Condensers acc. to Liebig, DURAN® tubing, with plastic olives
Made of DURAN® tubing. DIN 12576 and in addition to DIN standard. With NS cone and socket. Water connection GL14 threads with two threaded plastic olives.
Skip product gallery
From
CHF 6.30*
From
CHF 9.50*
From
CHF 9.30*
From
CHF 36.30*
From
CHF 55.20*
From
CHF 30.90*
From
CHF 2.00*
From
CHF 4.80*
From
CHF 19.00*
From
CHF 3.70*
From
CHF 37.00*
Accessories
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for spherical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
Bohlender GmbH
Bohlender GmbH
Sleeves, cone joint, PTFE
With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.
Otto Fahsig GmbH
Otto Fahsig GmbH
Gas leak detection fluid, bottle
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.
Dr. Dietmar Glindemann
Dr. Dietmar Glindemann
PTFE sealing rings for jointed glassware
An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Engler distilling flasks, DURAN®, ASTM, with beaded rim
Uniform wall thickness distribution makes these flasks ideal for heating applications and distillations. The flasks are manufactured from a hydrolytically resistant borosilicate glass 3.3, which is defined as "Type I, Class A" in the ASTM Specification E 438.ASTM D86DIN EN ISO 3405
Buddeberg GmbH
Buddeberg GmbH
BUDDE - joint grease
For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.
Bohlender GmbH
Bohlender GmbH
Sleeves with ribs, PTFE
For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for conical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
J.P. Pöllath
J.P. Pöllath
Joint grease, K.W.S
Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.
H W S Hans W. Schmidt
H W S Hans W. Schmidt
Ground joint clips for sleeve connections, wire, Chrome-nickel steel
Chrome-nickel steel.
Lenz-Laborglas GmbH & Co. KG
Lenz-Laborglas GmbH & Co. KG
Joint clips for conical joint sleeve connections, stainless steel, with set screw
For tapered ground joints as outlined belowWith or without set screwFor tapered ground joints as outlined below
Skip product gallery
Separating funnels, Squibb-pattern, borosilicate glass 3.3
From
CHF 21.75*
LLG-Separating funnel, conical, borosilicate glass 3.3
From
CHF 48.40*
Soxhlet extractors, without stopcock
Price on request
Separating funnel holder, PP
From
CHF 6.05*
Separating funnels, conical, borosilicate glass 3.3
From
CHF 70.40*
Separating funnels acc. to Squibb, borosilicate glass 3.3
From
CHF 69.70*
Separating funnels, cylindrical, with PTFE key, borosilicate glass 3.3
From
CHF 62.70*
Separating funnels, conical, borosilicate glass 3.3
From
CHF 40.00*
Soxhlet extraction stillheads, DURAN® tubing
From
CHF 96.70*
Separating funnels, borosilicate glass 3.3, with PE conical stopper
From
CHF 46.00*
Similar products
Supplied with PTFE stopcock. With PE conical stopper.ISO 4800NS necks according to DIN 12242 standard
Separating funnel with PTFE stopcock.DIN ISO 4800With standard ground joint and stopper
Borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12602.
Suitable to hold all types of laboratory funnels and also separatory funnels with diameter from 60 up to 150 mm. Two tapered wedges are provided to ensure firm grip.
Conical pattern. With PTFE stopcock and retaining device. Available with or without, scale to read the approximate volume. With PP conical stopper.
With PTFE plug. Available with or without scale to read the approximate volume. With PP-stopper .
Cylindrical shape with straight discharge tube, with NS socket and PE stopper, with PTFE plug, with screwthread retaining device, with scale (approx. volume / ml).* With rubber-ring retainer
Supplied with PTFE stopcock. With PE conical stopper.ISO 4800NS necks according to DIN 12242 standard
Soxhlet extraction stillheads, made of DURAN® tubing. Extractor heads acc. to DIN 12602 and in addition to DIN standard.
Volume graduations and inscriptions are printed with white enamelThick wall and reinforced rimInterchangeable PTFE stopcockAccording to DIN 12242ISO 4800