Condensers acc. to Dimroth for extractors, with PP olives, DURAN® tubing

Made of DURAN^® tubing. For extractors and for condensing vapours. With cone. Water connection with thread GL14, with two threaded PP olives.

Connection:	PP olive
Cooling surface:	930 cm²
Ground size:	NS71/51
Manufacturer Article Number:	05246018
Material:	DURAN® tubing
Type of construction (glass components):	Dimroth condenser
UNSPSC:	41104814

Variants table
Buy	Unit price	Content	Delivery time	Preview	Product number	Cooling surface	Ground size	Manufacturer Article Number

Other customers also bought

Lenz-Laborglas GmbH & Co. KG

Condensers acc. to Liebig, DURAN® tubing, with plastic olives

Made of DURAN® tubing. DIN 12576 and in addition to DIN standard. With NS cone and socket. Water connection GL14 threads with two threaded plastic olives.

From CHF 63.80*

Lenz-Laborglas GmbH & Co. KG

Dimroth condensers for extractors, with glass olives, DURAN® tubing

For condensing vapours, with NS cone, water connection: glass olives, made of DURAN® tubing.

From CHF 143.00*

Lenz-Laborglas GmbH & Co. KG

Condensers acc. to Allihn with GL threads, DURAN® tubing

Made of DURAN® tubing. Acc. to DIN 12581 and in addition to DIN standard. For condensing vapours. With NS cone and socket water connection GL14 threads with two threaded plastic olives.

From CHF 93.60*

Accessories

DWK Life Sciences GmbH (Duran)

Joint clips KECK, POM, for spherical ground joints

Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.

From CHF 6.30*

Otto Fahsig GmbH

Gas leak detection fluid, bottle

DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.

From CHF 9.30*

J.P. Pöllath

Joint grease, K.W.S

Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.

From CHF 19.00*

Bohlender GmbH

Sleeves with ribs, PTFE

For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.

From CHF 2.00*

Dr. Dietmar Glindemann

PTFE sealing rings for jointed glassware

An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage

From CHF 36.30*

DWK Life Sciences GmbH (Duran)

Engler distilling flasks, DURAN®, ASTM, with beaded rim

Uniform wall thickness distribution makes these flasks ideal for heating applications and distillations. The flasks are manufactured from a hydrolytically resistant borosilicate glass 3.3, which is defined as "Type I, Class A" in the ASTM Specification E 438.ASTM D86DIN EN ISO 3405

From CHF 55.20*

DWK Life Sciences GmbH (Duran)

Joint clips KECK, POM, for conical ground joints

Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.

From CHF 4.80*

Lenz-Laborglas GmbH & Co. KG

Joint clips for conical joint sleeve connections, stainless steel, with set screw

For tapered ground joints as outlined belowWith or without set screwFor tapered ground joints as outlined below

From CHF 37.00*

H W S Hans W. Schmidt

Ground joint clips for sleeve connections, wire, Chrome-nickel steel

Chrome-nickel steel.

From CHF 3.70*

Buddeberg GmbH

BUDDE - joint grease

For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.

From CHF 30.90*

Bohlender GmbH

Sleeves, cone joint, PTFE

With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.

From CHF 9.50*

Similar products

Pokal, Flasche, Pokal, Flasche, Pokal, Flasche

Separating funnels, Squibb-pattern, borosilicate glass 3.3

Supplied with PTFE stopcock. With PE conical stopper.ISO 4800NS necks according to DIN 12242 standard

From CHF 21.75*

LLG-Separating funnel, conical, borosilicate glass 3.3

Separating funnel with PTFE stopcock.DIN ISO 4800With standard ground joint and stopper

From CHF 48.40*

Soxhlet extractors, without stopcock

Borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12602.

Price on request

Separating funnel holder, PP

Suitable to hold all types of laboratory funnels and also separatory funnels with diameter from 60 up to 150 mm. Two tapered wedges are provided to ensure firm grip.

From CHF 6.05*

Separating funnels acc. to Squibb, borosilicate glass 3.3

With PTFE plug. Available with or without scale to read the approximate volume. With PP-stopper .

From CHF 69.70*

Separating funnels, conical, borosilicate glass 3.3

Conical pattern. With PTFE stopcock and retaining device. Available with or without, scale to read the approximate volume. With PP conical stopper.

From CHF 70.40*

Flasche, Tasse, Flasche, Tasse, Flasche, Tasse, Flasche, Tasse

Separating funnels, conical, borosilicate glass 3.3

Supplied with PTFE stopcock. With PE conical stopper.ISO 4800NS necks according to DIN 12242 standard

From CHF 40.00*

Separating funnels, cylindrical, with PTFE key, borosilicate glass 3.3

Cylindrical shape with straight discharge tube, with NS socket and PE stopper, with PTFE plug, with screwthread retaining device, with scale (approx. volume / ml).* With rubber-ring retainer

From CHF 62.70*

Soxhlet extraction stillheads, DURAN® tubing

Soxhlet extraction stillheads, made of DURAN® tubing. Extractor heads acc. to DIN 12602 and in addition to DIN standard.

From CHF 96.70*

Separating funnels, borosilicate glass 3.3, with PE conical stopper

Volume graduations and inscriptions are printed with white enamelThick wall and reinforced rimInterchangeable PTFE stopcockAccording to DIN 12242ISO 4800

From CHF 46.00*