Desiccators, plastic, vacuum, PC/PP
Product number:
9042615
Manufacturer:
Kartell S.p.A.
Packaging information:
Length:
198 mm
Width:
191 mm
Height:
135 mm
Weight:
0.295 kg
Description
Crystal clear, PC dome lid. PP. Lower section and desiccant tray. Venting stopper with non-return valve in lid. Polychlorbutadiene rubber (CK) O-ring seal between lid and base which is compressed when vacuum is applied. Lightweight and easy to use.
Properties
| Flange int. Ø: | 150 mm |
|---|---|
| Height: | 190 mm |
| Manufacturer Article Number: | 0055000 |
| Material: | PP/PC |
| Nominal capacity: | 2.15 l |
| Suitable for vacuum: | Yes |
| With stopcock: | Yes |
Skip product gallery
From
CHF 13.50*
Accessories
Kartell S.p.A.
Kartell S.p.A.
Desiccator plates, PP
PP. For use at room temperature. Not suitable for use with hot crucibles.
Skip product gallery
From
CHF 192.70*
From
CHF 193.90*
Other customers also bought
Thermo Elect.LED GmbH (Nalge)
Thermo Elect.LED GmbH (Nalge)
Desiccator Nalgene™, Type 5311, PC
Transparent, lightweight, unbreakable, for vacuum or non-vacuum use. With stopcock. Large, stable base. No danger of implosion. Capable of maintaining 0.95 bar negative pressure over a 24 hour period. With silicone O-ring, no lubrication required. Suitable for 230 mm diameter desiccator discs or plates. Max. height over plate 195 mm. Suitable for vacuum hoses with an inner diameter of 6 to 10 mm.Plate not included.
Bel-Art Products
Bel-Art Products
Vacuum desiccators, PP / PC
This lightweight plastic vacuum desiccator holds a full vacuum of 760 mm Hg at room temperature for 24 hours.Polycarbonate lid with large ribbed buttonWhite PP baseIncl. 0.32 cm thick perforated plateConical polypropylene valve with PTFE cone, for hoses with 6.4 - 9.5 mm I.D.With neoprene O-ring, for sealing up to 0 °C without grease
Skip product gallery
Desiccator Nalgene™, Type 5311, PC
From
CHF 192.70*
Desiccator plates, PP
From
CHF 13.50*
LLG-Vacuum desiccators, polycarbonate, round form, "Heavy Duty", with vacuum gauge
From
CHF 489.30*
Vacuum desiccators, PP / PC
From
CHF 193.90*
Desiccators, PP/PC
From
CHF 236.00*
Desiccators with stopcock, PC
From
CHF 349.00*
Desiccators Nalgene™, Type 5309, 5310, PC, blue
From
CHF 152.60*
Similar products
Transparent, lightweight, unbreakable, for vacuum or non-vacuum use. With stopcock. Large, stable base. No danger of implosion. Capable of maintaining 0.95 bar negative pressure over a 24 hour period. With silicone O-ring, no lubrication required. Suitable for 230 mm diameter desiccator discs or plates. Max. height over plate 195 mm. Suitable for vacuum hoses with an inner diameter of 6 to 10 mm.Plate not included.
PP. For use at room temperature. Not suitable for use with hot crucibles.
Cost effective alternative to glass desiccators. Highly transparent, lightweight, shatterproof, made of polycarbonate.Silicon O-ring and specially designed 'locking clip' allows use without grease and ensures an airtight seal. Flange lock holds the bottom and the lid together during non-vacuum conditions. Three-way stopcock provides great convenience for consistent vacuum draw, vacuum release or gas exchange e.g. inert gas. Maximum vacuum of 1.3 mbar (1.3 x 10-4 MPa) for more than 72 hours. Wide base provides superior stability. Hose connection outer diam. 9.5 mm.Also available in brown with UV-blocking effect for light sensitive samples.Scope of supply: Drying agent tray, perforated sample tray, O-ring and flange locker
This lightweight plastic vacuum desiccator holds a full vacuum of 760 mm Hg at room temperature for 24 hours.Polycarbonate lid with large ribbed buttonWhite PP baseIncl. 0.32 cm thick perforated plateConical polypropylene valve with PTFE cone, for hoses with 6.4 - 9.5 mm I.D.With neoprene O-ring, for sealing up to 0 °C without grease
Lower portion can be filled with desiccants. The materials to be dried are placed on a perforated disc made of PP. The lid is sealed with a neoprene gasket. Ideal for use in educational laboratories. Also available with stopcock for evacuation.
Lower portion can be filled with desiccants. The materials to be dried are placed on a perforated disc made of PP. The lid is sealed with a neoprene gasket. Ideal for use in educational laboratories.
Transparent PC bell and blue PP lower part. Will not break or implode under vacuum provided that the operating instructions are obeyed. Lower part is resistant to diluted acids, alkalis and other common desiccants. Vacuum connection at lower part. TFE stopcock is suitable for vacuum tubing 6.4mm i.d. For air tight sealing it is sufficient to grease sealing surface a little. No additional sealing ring is necessary. The additional rim at the bell prevents grease stains on lab benches.