Dissolved oxygen bottles, Winkler pattern
CHF 18.90*
% CHF 37.80* (50% saved)
Content:
1
69 Available. Delivery time: 5-7 workdays
Product number:
9304048
Manufacturer:
H. & K. Starke GmbH
Packaging information:
Length:
169 mm
Width:
149 mm
Height:
100 mm
Weight:
0.26 kg
Description
Winkler pattern. Soda-lime glass.
For determination of dissolved oxygen in water. The measured capacity is specified to ± 0,01ml. With white labelling area. Solid, bevelled glass stopper, secured with an accessory spring clip. Each bottle is adjusted to the relevant stopper. Stoppers and bottles are therefore not interchangeable. Each bottle and its stopper is marked with a unique, matching identification number.
For determination of dissolved oxygen in water. The measured capacity is specified to ± 0,01ml. With white labelling area. Solid, bevelled glass stopper, secured with an accessory spring clip. Each bottle is adjusted to the relevant stopper. Stoppers and bottles are therefore not interchangeable. Each bottle and its stopper is marked with a unique, matching identification number.
Properties
| Ground size: | NS19/26 |
|---|---|
| Manufacturer Article Number: | 604 0250 |
| Material: | Soda-lime glass |
| Nominal capacity: | 250 ml |
Skip product gallery
Thermostatic cabinets TC, with steel door
From
CHF 2,565.00*
Bottles (Karlsruhe bottles) with stoppers
From
CHF 66.90*
Dilution water containers for BOD depletion water
From
CHF 298.00*
Similar products
The incubators from Lovibond® are designed for continuous tempering for different applications, mainly for the determination of BOD, the storage of wastewater samples, and the determination of enzymatic activity. The temperature range is +2°C up to +40°C and can be regulated in steps of 0,1°C. Temperature tolerance is defined with +/- 1°C respectively +/- 0,5°C (at 20°C). Low engergy consumption due to reinforced isolation. The interior of the cabinets is equipped with sockets for connecting stirrers. Illuminated LED display with actual / setpoint display.Temperature range 2 °C to 40 °C, continuously adjustable in steps of 0.1 °CLow power consumptionIlluminated LED display of preset and current temperaturesWith natural refrigerant R600aIdeal for BOD determination at 20 °CPower sockets inside the incubatorThe incubators from Lovibond® are designed for continuous tempering for different applications, mainly for the determination of BOD, the storage of wastewater samples, and the determination of enzymatic activity. The temperature range is +2°C up to +40°C and can be regulated in steps of 0,1°C. Temperature tolerance is defined with +/- 1°C respectively +/- 0,5°C (at 20°C). Low engergy consumption due to reinforced isolation. The interior of the cabinets is equipped with sockets for connecting stirrers. Illuminated LED display with actual / setpoint display.Temperature range 2 °C to 40 °C, continuously adjustable in steps of 0.1 °CLow power consumptionIlluminated LED display of preset and current temperaturesWith natural refrigerant R600aIdeal for BOD determination at 20 °CPower sockets inside the incubator
The special bottle neck of the Karlsruhe bottles absorbs the water which is displaced by the stopper of the electrode. This construction guarantees clean working and ensures at the same time that the test results are not adulterated by unwanted entry of oxygen into the samples.
With vent, level display and stopcock. Blue solid-coloured (for light protection). Additional lid for easier cleaning.VD series: With distributor frits and compressed air connection without cooling coil.VDT series: With distribution frits and compressed air connection, with internal stainless steel cooling coil and connection for recirculation thermostat. 2x connections inlet / outlet cooling water: 2x ¾" with screwed on ½" connection with nozzle approx. 13 mm. Third connection for ventilation with 6 mm nozzle.