Distilling heads acc. to Claisen, sloping, DURAN® tubing

Made of DURAN^® tubing. Acc. to DIN 12594 and in addition to DIN standard (*), with two parallel NS 14/23 sockets and two NS cones (descending angle: 75°), for distillation thermometers of 55 mm built-in length.

Angle:	75 °
Cone[s] oblique:	NS29/32
Cone[s] straight:	NS29/32
Manufacturer Article Number:	05030044
Material:	DURAN® tubing
Socket[s] straight:	NS14/23
Standard:	DIN 12594
Thermometer usable:	Yes
UNSPSC:	41-10-48-14

Variants table
Buy	Unit price	Content	Delivery time	Preview	Product number	Cone[s] oblique	Cone[s] straight	Manufacturer Article Number

Other customers also bought

Lenz-Laborglas GmbH & Co. KG

Distilling heads, DURAN® tubing

Made of DURAN® tubing. Acc. to DIN 12594 and in addition to DIN standard, with one NS 14/23 socket and two NS cones (descending angle: 75°), for distillation thermometers of 55 mm built-in length.

From CHF 38.30*

Accessories

Bohlender GmbH

Sleeves with ribs, PTFE

For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.

From CHF 2.00*

DWK Life Sciences GmbH (Duran)

Joint clips KECK, POM, for conical ground joints

Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.

From CHF 4.80*

H W S Hans W. Schmidt

Ground joint clips for sleeve connections, wire, Chrome-nickel steel

Chrome-nickel steel.

From CHF 3.70*

Lenz-Laborglas GmbH & Co. KG

Joint clips for conical joint sleeve connections, stainless steel, with set screw

For tapered ground joints as outlined belowWith or without set screwFor tapered ground joints as outlined below

From CHF 37.00*

Otto Fahsig GmbH

Gas leak detection fluid, bottle

DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.

From CHF 9.30*

J.P. Pöllath

Joint grease, K.W.S

Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.

From CHF 19.00*

DWK Life Sciences GmbH (Duran)

Joint clips KECK, POM, for spherical ground joints

Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.

From CHF 6.30*

BRAND GMBH + CO.KG

Sleeves, PTFE, disposable

Seals without grease - no grease residues are left in the analysis. Excellent chemical resistance. Can be used in temperatures from -200 to 260 °C. Wall thickness only 0.05 mm. Wide range of applications, also suitable for vacuums down to 0.1 mbar, e.g. for rotary evaporators.

From CHF 38.30*

Dr. Dietmar Glindemann

PTFE sealing rings for jointed glassware

An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage

From CHF 36.30*

DWK Life Sciences GmbH (Duran)

Engler distilling flasks, DURAN®, ASTM, with beaded rim

Uniform wall thickness distribution makes these flasks ideal for heating applications and distillations. The flasks are manufactured from a hydrolytically resistant borosilicate glass 3.3, which is defined as "Type I, Class A" in the ASTM Specification E 438.ASTM D86DIN EN ISO 3405

From CHF 55.20*

Bohlender GmbH

Sleeves, cone joint, PTFE

With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.

From CHF 9.50*

Buddeberg GmbH

BUDDE - joint grease

For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.

From CHF 30.90*

Similar products

Receiver adapters, with olives, DURAN® tubing, straight

Made of DURAN® tubing. Acc. to DIN 12594, with NS socket and cone, with drain tip, vacuum connection: glass olive.

From CHF 31.50*

Distilling links with Liebig condenser and vacuum receiver adapter, DURAN® tubing

Made of DURAN® tubing. DIN 12596. With Liebig condenser at 75° and vertical outlet with NS cone and vacuum connection with glass olives or thread GL14. With socket NS 14/23 for distillation thermometers of 55mm built-in length.

From CHF 125.00*

Distributors for distilling receivers to Bredt, DURAN® tubing

Made of DURAN® tubing. With four cones NS 14/23, for round bottom flasks up to 250ml volume.

From CHF 142.00*

Glass beads type M

Type AR soda lime glass. Supplied in packs of approx. 1kg.

From CHF 21.30*

Columns acc. to Vigreux, with removable glass jacket, DURAN® tubing

Made of DURAN® tubing.

From CHF 155.00*

Distilling links acc. to Claisen, with olive, DURAN® tubing

Made of DURAN® tubing. With Liebig condenser and Claisen head, water connection with glass olives, with two sockets NS 14/23 for distillation thermometers of 55mm built-in length.

From CHF 132.00*

Multiple adapters, 2-necks, DURAN® tubing

Made of DURAN® tubing. With two sockets and one cone.One neck 105° upwards.

From CHF 42.10*

Delivery adapters, straight, with suction tube, DURAN® tubing

Made of DURAN® tubing. Cone and socket, straight.

From CHF 31.40*

Receiver adapters, with GL thread, DURAN® tubing, straight

Made of DURAN® tubing. Receiver adapters acc. to DIN 12594, with NS socket and NS cone, with drain tip, vacuum connection: thread GL18.

From CHF 54.40*

Receiver adapters, with olives, DURAN® tubing, bent 105°

Made of DURAN® tubing. Acc. to DIN 12594, with NS socket and cone, with drain tip, vacuum connection: glass olive.

From CHF 41.30*