Dry Block Heaters, digital
CHF 766.00*
Content:
1
Delivery according to order confirmation
Product number:
4659491
Manufacturer:
Ohaus GmbH
Packaging information:
Weight:
2.7 kg
Description
Designed for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points, and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Each of the models accept separate interchangeable modular blocks, accommodating various tube sizes from 0.2 ml microtubes to 50 ml centrifuge tubes. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact for maximum heat retention.
Without blocks. Please order separately.
- Microprocessor Control
- LED Display
- Temperature Calibration Mode
- Caution Hot Indicator
- Audible Alarm
Without blocks. Please order separately.
| Specifications | |
| Temperature range: Temperature stability at 37 °C: | ambient +5 to 120 °C ±0.2 °C |
| Uniformity within block at 37 °C: | ±0.2 °C |
| Uniformity across blocks at 37 °C / Heat up time to 100 °C | |
| 1 block: 2 blocks: 4 blocks: 6 blocks: | - / 45 min ±0.1 °C / 50 min ±0.2 °C / 60 min ±0.3 °C / 65 min |
| Permissible ambient conditions: | 18 to 33 °C |
| Power supply: | 230 V, 50/60 Hz |
Properties
| Capacity: | 1 block |
|---|---|
| Height mm: | 89 |
| Length mm: | 315 |
| Manufacturer Article Number: | 30392061 |
| Width mm: | 203 |
Skip product gallery
From
CHF 153.00*
From
CHF 281.00*
Accessories
Ohaus GmbH
Ohaus GmbH
Blocks and Combination Blocks for Standard Test Tubes for Dry Block Heaters
Ohaus GmbH
Ohaus GmbH
Temperature Probe Kit for Dry Block Heaters
Enables the unit to read actual block or sample temperature and display that temperature on the control panel. The optional External Temperature Probe Kit includes a stainless steel RTD PT100 probe, 457 mm stainless steel support rod, thermometer/temperature probe extension clamp and hook connector. The PT100 RTD probe is designed to fit perfectly in to the thermometer well of each modular block.
Ohaus GmbH
Ohaus GmbH
Skip product gallery
Digital dry bath LLG-uniBLOCKTHERM
From
CHF 419.40*
Thermo Scientific™ Digital Dry Bath / Block Heater
From
CHF 543.00*
Block Heaters, analogue and digital, BH-200 series
From
CHF 961.00*
Block thermostats,QBD and QBH series
From
CHF 1,082.00*
Cooling/Heating block Eppendorf ThermoStat C
From
CHF 2,407.00*
Block thermostats PCH-1 / PCH-2 / PCH-3
From
CHF 1,623.00*
Similar products
Suitable for use in microbiological, histological, clinical, industrial and environmental laboratories. Various types of optional heating blocks are available as accessories for the LLG-uniBLOCKTHERM.Digital control with LED displayCan be used up to 120 °CFor timer and continuous operationCan be used with different heating blocks1 x block unitWith overheating protectionScope of supply: LLG-uniBLOCKTHERM, removal tool, lidPlease order heating blocks separately.Temperature accuracy at 100 °C:±1.0 °CTemperature accuracy 100 °C:±2.0 °CTemperature increment:±1.0 °CSpecificationsTemperature range:RT ... 120 °CTemperature uniformity at 37 °C:±0.5 °CTemperature accuracy at 37 °C:±0.5 °CTimer:
Block material:0 ... 99:59:00 min
AluminiumDimensions (W x D x H):175 x 290 x 85 mmWeight:3 kgPower supply:220 ... 240 V, 50/60 HzWarranty:3 years
Thermo Scientific™ digital dry baths, which offer a range of configurations with interchangeable modular blocks for a variety of application needs.Designed for basic to advanced applications with a max temperature of 130 °C, a timer and available in 1, 2 and 4 block sizes.Digital controls and display of time and temperatureAdvanced internal temperature sensing probe for outstanding temperature accuracy and controlPrecise temperature control with PID circuitTemperature calibration enables to offset the temperature to desired valueTimer allows the user to accurately monitor the heating timeWide range of interchangeable aluminum alloy heat blocks provide versatility and allow for easy cleaning and disinfectingPowder-coated steel body construction ensures durabilityBuilt-in over-temperature protection device warrants sample and user safetyTemperature deviation adjustmentBlocks are not included. Please order separately.Relative Humidity≤ 80%Temperature Accuracy≤ ± 0.5 °CTimer0 ... 99:59 min or continuousControllerPID digitalTemperature RangeAmbient + 5 °C – 130 °C (Ambient at 25 °C)Power supply200 ... 240 V, 50/60 Hz
choice of either analogue or digital modelsdigital models available with either 130 or 200 °C maximum temperaturethree block model for extra capacitydual control models have two blocks with independent temperature controluniform and stable block temperaturesDesigned for the precise heating of test-tubes, microcentrifuge tubes, cuvettes and microplates.Range compromises an economical analogue model with easy to use, dial setting and advanced digital models with bright, easy to read, LED display which facilitates setting of the required temperature and also accurate monitoring of the actual temperature.Excellent temperature stability and uniformity is maintained via sensitive, microprocessor control.Heats to 100°C in
For controlled dry heating of test tubes, microplates and Eppendorf tubes in interchangeable aluminium blocks. The following models are available:Choose from 3 digital systems with 1, 2 or 4 interchangeable blocks (QBD models) and 1 digital high-temperature system (QBH2) with 2 blocksFast heat-up time and in-block temperature sensing capability using external sensor probe. Please order Cat. No. 6.228 714 separately.Built-in timer, programmable delayed start and RS232 output for data monitoringIncludes block removal toolRequires but does not include interchangeable QB-series blocksSpecificationsTemperature range:ambient 5 to 130 °C, QBH2: ambient 5 to 200 °CStability at 37 °C:
Uniformity±0.1 °Cwithin the block at 37 °C:
across similar blocks at 37 °C:±0.1 °C
±0.2 °CSupply requirements:230 V, 50/60 Hz, single phase
The ideal device to accurately set and maintain temperatures. Precise temperature control is achieved using optimally balanced heating and cooling elements (peltier technology). The cooling and heating temperature keys provide quick access to five important experimental temperatures (4°C, 16°C, 37°C, 56°C and 95°C). You can also individually store 15 programs.Excellent temperature accuracyPrecise temperature control from -10 to 110°C (110°C can be set when using 12 mm and cryo SmartBlocks™)Prevent condensation and improve temperature homogeneity with the new ThermoTopComprehensive range of program functionsScope of supply: Basic device, without Eppendorf SmartBlock™
Personal benchtop cooling/heating dry block for microcentrifuge tubes. The ingenious block construction, combined with the powerful Peltier module, produces very rapid cooling and heating.Temperature range:-10 to +100°CHeat up, amb. to 100°C:15 minCool down, 100°C to amb.:15 minCool down, amb. to -10°C:21 min
