Filter Units Nalgene™, PSU, without membrane
CHF 291.30*
Content:
1
10 Available. Delivery time: 5-7 workdays
Product number:
9046151
Manufacturer:
Thermo Elect.LED GmbH (Nalge)
Packaging information:
Length:
218 mm
Width:
109 mm
Height:
110 mm
Weight:
0.284 kg
Description
Graduated reusable filtration unit bodies with upper manifolds and lower receivers made of unbreakable polysulphone (PSU). Nominal filtration surface 11cm². With membrane support plate. Without membrane. For filter membrane from 47mm to 50mm.
Properties
| Manufacturer Article Number: | 300-4000 |
|---|---|
| Volume upper/lower part ml: | 250/250 |
Skip product gallery
Bottle Top Filters Nalgene™ Rapid-Flow™, PES Membrane, sterile
Price on request
Filter Storage Bottles Nalgene™ Rapid-Flow™, PS, sterile
From
CHF 6.80*
Filter units Nalgene™ Rapid-Flow™, PES Membrane, sterile
From
CHF 28.70*
Filter units, PES membrane, sterile
Price on request
Bottle Top Filters Nalgene™ Rapid-Flow™, SFCA Membrane, sterile
From
CHF 140.40*
Filter units, Sartolab® RF, PES membrane, sterile
From
CHF 229.00*
Filter units Nalgene™ Rapid-Flow™, SFCA Membrane, sterile
From
CHF 184.90*
Bottle-top filters, Sartolab® BT, PES membrane
From
CHF 179.00*
Filter Units, Cellulose Nitrate Membrane, sterile
From
CHF 12.10*
Similar products
Filters securely screw onto glass media bottles with 33 mm or 45 mm neck sizes. Allows direct filtration of liquid into sterile glass media bottles.Tight and secure thread connection for vacuum filtration, vacuum tubing to be connected onto tubing adapter of side-arm. Graduated. Certificate of quality included in each full case. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units for easy identification and lot traceability.
Easy-to-use ergonomic design. Can be used to store sterilised filtrate. Radiation-sterilised to save you time and minimize contamination. Also handy as presterilised, single-use storage containers. 1-1/2-turn threaded screw closure guarantees a leakproof seal and eliminates pH shift in receivers. Certified. Pyrogen-free, non cytotoxic. Sterile, graduated and leakproof.
Ideal for biological and pharmaceutical sterile filtration. PES membrane features low protein binding, low level of extractables and a high flow rate. Now available in three pore sizes: The best filter units with 0.20µm and 0.45µm pore size and new to the protection of valuable cell cultures from mycoplasma with 0.10µm pore size. Filter top and filtrate bottle are graduated. Blue color-coded collar with cellulosic vent plug side arm and quick-disconnect tubing adapter. Leakproof, sterile screw closure included for storage of sterile filtrate. Sterile, single packed. Certificate of Quality included in each full case. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability.
These bottle-top filter units are ideally suited for the separation or purification of samples which are contained in large volumes. Bottle-top filter and reservoir bottle are includedLight weight and stable wall constructionLarge knurls on the reservoir bottle cap for easy screwingWide bottle mouth for efficient pouring outVolume graduationHose connector fits multiple diametersPyrogen-freeMembrane material: Polyethersulfone (PES)GL45
Tissue culture filters for screw fitting onto bottles with 33mm or 45mm neck diameters. With surfactant-free, cellulose acetate membrane (SFCA) and polystyrene (PS) housing. Gamma-irradiated sterile. Pyrogen-free. Non cytotoxic. Low-pressure filtration can be carried out directly into a suitable sterile bottle. Caution: Only use sterile bottles authorised for use in low pressure applications. Always wear protective equipment for low pressure procedures. The membrane is characterised by its low protein binding, good throughput rates and minimal clogging with negligible protein loss. Permanent, moulded graduations. Quick-disconnection tubing adaptor with cellulosic vent plug for tubing with an internal diameter of 6mm to 9mm. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units for easy identification and lot traceability.
Filter units with receiver for sterile filtration of aqueous solutions and media, particularly cell culture. Simple and safe to handle. The integral polyethersulfone (PES) membrane guarantees extremely good throughput times and low protein binding, making it ideal for filtering proteinaceous solutions. The receiver is supplied with a flexible vacuum tubing adapter and a lid.
Single-use, disposable filter units for sterile filtration of media and other reagents, and for other highly sensitive cell culture lines. With polystyrene (PS) upper and lower chambers and surfactant-free, cellulose acetate membranes. Colour code: yellow collar. For cell culture. Gamma-irradiated sterile. Low protein binding, with high throughput rate for proteinaceous solutions and minimal extractables content. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units bottle tops and receivers for easy identification and lot traceability.
Sterile vacuum filters for screwing directly onto sterile bottles. Disposable units for sterile filtration of media and aqueous solutions. The special polyethersulphone (PES) membrane produces extremely good throughput times and low protein binding, making it ideal for cell culture applications. With GL45 screw connection for all standard bottles.Caution: Only use sterile bottles authorised for use in low pressure applications.
White, cellulose nitrate membrane. Colour code: green. Gamma-irradiated sterile. Highest throughput rate for water and aqueous solutions, low extractables content. Surfactant-free. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units, bottle tops and receivers for easy identification and lot traceability.