Flocculator FC S
CHF 2,414.00*
Content:
1
Delivery according to order confirmation
Product number:
4666801
Manufacturer:
Velp Scientifica SRL
Packaging information:
Weight:
18.7 kg
Description
The analogue flocculator was specially designed for coagulation and flocculation determinations in water treatment analysis. The device offers independently controllable stirring positions so that different conditions can be tested and simulated simultaneously. With the ergonomic knobs, selectable speeds (10-15-30-45-60-90-120-150-200-300 min-1) can be set at each position. The robust brushless motor delivers precise and reproducible stirring speeds and thanks to SpeedServo™ torque compensation technology, the speed remains constant even if the viscosity of the sample changes. The illuminated back panel improves sample visibility during the flocculation process and makes it easy to observe results in real time. Stainless steel stirring rods are adjustable in height.
Properties
| Depth: | 296 mm |
|---|---|
| Dimensions (WxDxH): | 935 x 296 x 404 mm |
| Display: | Analogue |
| Height: | 404 mm |
| Manufacturer Article Number: | F105A0112 |
| Max. speed: | 300 1/min |
| Max. voltage: | 240 V |
| Min. speed: | 10 1/min |
| Min. voltage: | 100 V |
| No. of stirring positions: | 6 |
| Plug type: | EU |
| Power supply: | 100 ... 240 V, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Speed: | 10 ... 300 1/min |
| Type: | FC6S |
| Type of auxiliary energy: | Mains connection |
| Weight: | 18 kg |
| Width: | 935 mm |
| With timer: | Yes |
Skip product gallery
Sedimentation cone, plastic, SAN
From
CHF 48.30*
Accessory holders for sedimentation cones, PVC
From
CHF 203.00*
Imhoff Sedimentation cones, borosilicate glass 3.3
From
CHF 104.00*
Secchi Disk
From
CHF 37.45*
Turbidity Standards
From
CHF 107.70*
Turbidity meter TB 211 IR
From
CHF 1,472.00*
Flocculation tester ET 730 / ET 740 / ET 750, bench top
From
CHF 1,850.00*
Similar products
Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.
Imhoff pattern, solid grey PVC. Stable design.
Manufactured from borosilicate glass 3.3 according to sedimentation tests according to DIN 12672 standard. Featured with volume graduation of 1000 ml. Volume graduations and inscriptions are printed with white enamel.
For determining the depth of visibility and light permeability of water. Sturdy design made of strong, hard-wearing plastic. Lead weight for better lowering. The approx. 15 cm high rod is fitted with an eyelet for fastening the lowering engine. The lowering line is marked in intervals of 100 cm with figures from 1 to 10 and in between additionally with line markings each 50 cm for better reading of the depth of visibility while the disk is being lowered.Lowering line, please order separately.
Highly accurate turbidity standards composed of suspended microspheres, suitable for Instrument calibration and control of all turbidity meters. Stable, shelf life of 2 years (from Date of Manufacturing). NIST traceable, US EPA approved and tested in compliance with ISO 7027. HDPE bottles of 100 ml.Two ranges available:Ratio range for Ratio Turbidity Measuring instruments (measure of the scattered light from the sample at a 90° angle from the incident light, plus at additional angles (several detectors)Non Ratio for Non Ratio Turbidity Measuring instruments will measure the scattered light from the sample at a 90° angle from the incident light (one detector)
The compact infrared turbidity meter TB 211 IR is designed to allow fast, precise on-site testing. The unit measures the scattered light at an angle of 90°, as stipulated in EN ISO 7027. The wide measuring range from 0.01 to 1100 TE/F = NTU = FNU permits use of the unit for various media, ranging from drinking water to waste water.As infrared light is used for measurement, the unit can be used to test both coloured and colourless liquids. The standards required for calibration of the unit are also supplied. A second adjustment mode allows alternative adjustment with user-defined turbidity standards.measuring ranges from 0.01 to 1100NTU (autorange)measurement with infrared light at an angle of 90°easy operation600 tests between battery chargesScope of supply: Turbidity meter, 4 turbidity standards
Designed for efficiency testing of flocculation or precipitation agents.For use in laboratories. Model ET 730 portableIlluminated back panel for glare-free observation of the samplesModels ET 740 and ET 750 with continuously variable stirring speedSpeed of ET 730 can be adjusted to 20, 40, 50, 100 and 200 min-1Timer feature and digital displayHeight adjustment of the stirring blades during operationFor beakers with 1000 to 1500 ml volume, tall and low formSpecificationsSpeed controlAL30:
AL40 + AL50:20, 40, 50, 100, 120 min-1
10 ... 300 min-1 (stepless)TimerAL30:
AL40 + AL50:0 ... 30 minutes (continuous)
0 ... 999 min or 0 ... 99 h (continuous)Power Supply:100 ... 240 V, 50/60 Hz