Flocculator FP 4
CHF 1,165.00*
Content:
1
Delivery according to order confirmation
Product number:
4666802
Manufacturer:
Velp Scientifica SRL
Packaging information:
Length:
410 mm
Width:
406 mm
Height:
365 mm
Weight:
5.521 kg
Description
The digital flocculator was specially designed for coagulation and flocculation determinations in water treatment analysis. The practical handle makes it possible to carry out tests in real time in the laboratory or on site. The device can be powered by a car cigarette lighter or plugged into the power grid. The speed and timer (1 min to 99 h 59 min) can be easily set using the ergonomic rotary knob and LED display. The robust brushless motor delivers precise and reproducible stirring speeds and thanks to SpeedServo™ torque compensation technology, the speed remains constant even if the viscosity of the sample changes. The central illumination system improves sample visibility during the flocculation process and makes it easier to observe results in real time. Stainless steel stirring rods are adjustable in height.
Properties
| Depth: | 265 mm |
|---|---|
| Dimensions (WxDxH): | 250 x 265 x 310 mm |
| Display: | Digital |
| Height: | 310 mm |
| Manufacturer Article Number: | F105A0117 |
| Max. speed: | 300 1/min |
| Max. voltage: | 240 V |
| Min. speed: | 10 1/min |
| Min. voltage: | 100 V |
| No. of stirring positions: | 4 |
| Plug type: | EU |
| Power supply: | 100 ... 240 V, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Speed: | 10 ... 300 1/min |
| Type: | FP 4 |
| Type of auxiliary energy: | Mains connection |
| Weight: | 3.8 kg |
| Width: | 250 mm |
| With timer: | Yes |
Skip product gallery
Sedimentation cone, plastic, SAN
From
CHF 48.30*
Accessory holders for sedimentation cones, PVC
From
CHF 203.00*
Imhoff Sedimentation cones, borosilicate glass 3.3
From
CHF 104.00*
Secchi Disk
From
CHF 37.45*
Turbidity Standards
From
CHF 107.70*
Similar products
Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.
Imhoff pattern, solid grey PVC. Stable design.
Manufactured from borosilicate glass 3.3 according to sedimentation tests according to DIN 12672 standard. Featured with volume graduation of 1000 ml. Volume graduations and inscriptions are printed with white enamel.
For determining the depth of visibility and light permeability of water. Sturdy design made of strong, hard-wearing plastic. Lead weight for better lowering. The approx. 15 cm high rod is fitted with an eyelet for fastening the lowering engine. The lowering line is marked in intervals of 100 cm with figures from 1 to 10 and in between additionally with line markings each 50 cm for better reading of the depth of visibility while the disk is being lowered.Lowering line, please order separately.
Highly accurate turbidity standards composed of suspended microspheres, suitable for Instrument calibration and control of all turbidity meters. Stable, shelf life of 2 years (from Date of Manufacturing). NIST traceable, US EPA approved and tested in compliance with ISO 7027. HDPE bottles of 100 ml.Two ranges available:Ratio range for Ratio Turbidity Measuring instruments (measure of the scattered light from the sample at a 90° angle from the incident light, plus at additional angles (several detectors)Non Ratio for Non Ratio Turbidity Measuring instruments will measure the scattered light from the sample at a 90° angle from the incident light (one detector)