Foot pumps OTAL®, PP
CHF 148.00*
Content:
1
Delivery according to order confirmation
Product number:
9001015
Manufacturer:
Bürkle GmbH
Packaging information:
Length:
497 mm
Width:
190 mm
Height:
132 mm
Weight:
0.803 kg
Description
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.
- Good pump capacity
- Foodsafe
- Delivery tubes made of PP
- Universal bungs made of soft PVC, for container openings of 30 – 70 mm
- For weak acids, alkalis and detergents
Properties
| Flow rate: | 20 l/min |
|---|---|
| Immersion depth: | 700 mm |
| Immersion tube Ø: | 15 mm |
| Manufacturer Article Number: | 5000-1500 |
Skip product gallery
From
CHF 231.00*
From
CHF 152.00*
From
CHF 231.00*
From
CHF 167.00*
Other customers also bought
Bürkle GmbH
Bürkle GmbH
Foot pumps OTAL®, PVDF
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PVDFUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor acids, alkalis and chlorine bleaching, not for heavily oxidising acids and alkalis
Bürkle GmbH
Bürkle GmbH
Foot pumps OTAL®, PP, with tube and stopcock
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mm1.5 m discharge tube, PVCStopcock made of PP/PE (Ø 10 mm)
Bürkle GmbH
Bürkle GmbH
Foot pumps OTAL®, stainless steel
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of stainless steelUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor liquids that are not easily flammable in Hazard Category AIII (VbF)
Bürkle GmbH
Bürkle GmbH
Foot pumps OTAL®, battery-pumps
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeWith delivery tubes made of PP/PVCFor safe filling of car batteries with acid or distilled waterWith tube shutoff valveWith dosing tip for precise filling
Skip product gallery
Anti-static set
From
CHF 82.60*
Flow Indicator with paddle wheel, SAN
From
CHF 58.60*
Solvent pump hand operated, for tinplate canisters
From
CHF 795.00*
Hand pumps OTAL®, PP
From
CHF 119.00*
Solvent pump foot operated, with flexible tubing
From
CHF 1,083.00*
Drum pump Pump-it®
From
CHF 202.00*
Barrel pumps, PP, with flexible, PVC dispensing hose and stopcock
From
CHF 231.00*
Similar products
When dispensing combustible/explosive liquids pump, both dispensing and filling drum involved in the process must be sufficiently earthed, in order to prevent ignition or explosion through electrostatic discharges. Antistatic set, includes three colour-coded connecting cables with clamps, supplied complete in plastic case.
For liquid flows down to 5 ml/sec. Wheel spins freely and speed of rotation is proportional to flow rate. Maximum recommended flow rate up to 95 ml/sec, max 2 bar pressure. Not to be used with corrosive fluids or over +85 °C. Can be used with gases.
For contamination-free removal of organic solvents and flavouring agents. Can be completely closed off with two ball valves so that no dangerous vapours can escape after dispensing. Electrostatic charge can be dissipated through the accessory antistatic set (please order separately).Medium-contacting parts are made of stainless steel (1.4301) and PTFEFor containers up to 60 litresIncl. connector thread for pull-out spouts with Ø 35 mm
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor weak acids, alkalis and detergents
For filling off high purity liquids such as solvents. Due to the barrel screw joint and the stopcock, the container and the pump can be hermetically sealed. Electrostatic charge can be dissipated through the accessory antistatic set (please order seperately).Medium-contacting parts made of stainless steel (1.4301) and PTFEFor barrels up to 220 litres, immersion tube can be steplessly adjusted to the barrel depthSuitable for steel barrels with R 2'' thread
For rapid and clean emptying from cans, drums and small barrels up to 60 l.Medium-contacting parts made of PP, PE and FKMPrecise dosing, without drippingPump connection suitable for 64 mm dia. (BSI) container threadsStepless length adjustment of immersion tubeThreaded adapters for most commercially-sold containers availableNot suitable for HCl
For decanting acids, caustic solutions and aggressive detergentsExcellent recovery of residual liquid in the barrel provided by base-sitting, non-return valve and steplessly adjustable immersion tubeFor barrels and tanks from 30 to 1000 l