High-power homogeniser T 50 digital ULTRA-TURRAX®
CHF 4,989.00*
Content:
1
Delivery according to order confirmation
Product number:
9570952
Manufacturer:
IKA-Werke GmbH & Co.KG
Packaging information:
Length:
464 mm
Width:
250 mm
Height:
137 mm
Weight:
6.42 kg
Description
Powerful dispersing instrument for volumes from 0.25 to 30 l (H2O) with digital speed display. It offers a wide speed range from 600 to 10000 rpm that enables users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements guarantees a wide range of applications. Reproducible operations due to constant speed even with changes in viscosities.
Dispersing heads must be ordered separately.
- Digital speed display
- Electronic speed control
- Electronic overload protection
- Stainless steel dispersing elements can be cleaned quickly and easily
- Smooth start
- Error code display
Dispersing heads must be ordered separately.
Properties
| Depth: | 139 mm |
|---|---|
| Dimensions (WxDxH): | 115 x 139 x 355 mm |
| Display: | Digital |
| Height: | 355 mm |
| IP code: | IP 20 |
| Manufacturer Article Number: | 0003787000 |
| Max. Viscosity: | 5000 mPa·s |
| Max. speed: | 10000 1/min |
| Max. voltage: | 240 V |
| Max. working volume: | 30 l |
| Min. speed: | 600 1/min |
| Min. voltage: | 220 V |
| Min. working volume: | 0.25 l |
| Noise level: | 72 db(A) |
| Plug type: | EU |
| Power supply: | 220 ... 240 V, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Rated capacity: | 1100 W |
| Speed: | 600 ... 10,000 1/min |
| Type: | T 50 digital ULTRA-TURRAX® |
| Type of auxiliary energy: | Mains connection |
| Weight: | 5.85 kg |
| Width: | 115 mm |
| With timer: | No |
| Working volume: | 0.25 ... 30 l |
Skip product gallery
From
CHF 240.20*
From
CHF 2,637.00*
From
CHF 3,621.00*
From
CHF 447.60*
From
CHF 964.70*
Accessories
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Bosshead R 271 for overhead stirrers and Disperser T 50 digital ULTRA-TURRAX®
Claming range stand 34 mmClaming range extension arm 16 mm
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Special dispersing heads for disperser T50 digital
R 50 "high speed" stirring shaftUsing the R 50 stirring shaft, the T50 digital is quickly converted into a high speed stirrer. 700W power and 10000rpm are provided for rapid mixing, dissolving, and breaking up pigment agglomerates. The conical shaft is supported by means of ball bearings, the mixing elements have a screw connection. For operational safety a protective cage is fitted around the mixing element.S 50 N - W 80 SMK Jet mixer headFor shortening mixing and dissolving times. The vertical flow and the high tangential speed, up to 10000rpm, ensure intensive mixing. The head is used for adding gases or liquids, for lump-free suspension of difficult to dissolve powders or for dissolving sedimented, accreted substances.S 50 N - W 65 SK Cutting headTo crush large pieces (up to 50mm) of fibrous materials, such as plant matter, vegetables and fruit.
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Dispersing heads for T50 digital ULTRA-TURRAX®
Stainless steel dispersing heads
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Strap clamps RH 5 for overhead stirrers an Disperser T 50 digital ULTRA-TURRAX®
With R 270 bosshead. For vessel Ø 40 to 300 mm.
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
H-stand R 2722 for overhead stirrers and Disperser T 50 digital ULTRA-TURRAX®
Stable stands with H-shaped base. Stands have a levelling screw to compensate for unevenness on the laboratory bench. Max. load 10 kg.
Skip product gallery
Dispersing heads for T 18 ULTRA-TURRAX® series
From
CHF 387.40*
Dispersing heads for T 25 ULTRA-TURRAX® series
From
CHF 387.40*
Disperser System ULTRA-TURRAX® Tube Drive
From
CHF 880.10*
Disperser System ULTRA-TURRAX® Tube Drive P control
From
CHF 1,917.00*
Stands for Homogenisers POLYTRON®
From
CHF 27.50*
Dispersing heads for Homogeniser POLYTRON®
From
CHF 538.00*
Stand Homogenisers POLYTRON® PT 10-35 GT (Ecoline)
From
CHF 2,785.00*
Similar products
Plastic dispersing heads: AutoclavableStainless steel dispersing heads: Ultimate fineness emulsions 1 to 10 µm and suspensions 10 to 50 µm, sterilisable by all methods.
Plastic dispersing heads: Autoclavable. Stainless steel dispersing heads: Ultimate fineness: emulsions 1µm to 10µm and suspensions 5µm to 50µm, sterilisable by all methods. ST tools are recommended for use with tissue and other fibrous materials.
Disperse, stir and grind using a single drive unit. Patented disposable disperser system for volumes from 2 to 50 ml with hermetically sealable, disposable sample tubes. Provides protection and safety from: Infectious samples, toxic substances, strong-smelling materials.No possibility of cross-contaminationSuitable for individual or serial operationsIncreased safety due to low voltage (24 V) powerChemically resistant plastic containersAnti-locking functionScope of supply: Device incl. removal hook for removing the rotor-stator unitDispersing tubes (20 and 50 ml) with pierceable membrane and γ-sterilised are available on request.
Powerful motor for the best stirring, dispersing, grinding and homogenisation results, especially suitable for safe processing of infectious, toxic or odour-intensive samples.USB interface for experiment control and documentationCollecting tray for protection against leaking liquidsSimple, precise and multilingual menu navigation with OLED displayProgrammable sample conditions (library)Tubo button for short-term, intensive mixing, dispersing and grindingAdjustable reverse operationScope of supply: Device, removal hook, plastic hose for drainage, USB cable, power adapter
HS 1200 E: Holder for the support of drive, transformer, four dispersing aggregates and two tools.ST-P 13/320: Stainless steel plate stand with anti-slip mat made of silicone, with height-adjustable holder for the drive and for fastening the base station.ST-P 01/200: Stainless steel joint stand (gas spring) with two rivet plugs for safe fixing of the basic station The drive holder can be rotated in any direction, raised and lowered.ST-P 15/320: Stainless steel plate stand with height-adjustable holder for drive support and for safe fixing of the basic station.ST-P 20/600: Plate stand with two rod design. Height adjustable.ST-P 10/600: Plate stand with one rod design. Allows easy and safe height adjustment of the drive unit. Material: AluminumST-F 10/600: H-foot stand made of anodized aluminum and the height adjustable, swiveling PTFE-coated work table with vessel holder. Material: AluminumST-P 14/590+500: Electric plate stand with lifting telescopic bar for more ease of use. Incl. up/down button and mat to prevent slipping. Stroke 500 mm. The electronics are designed for ambient temperatures of +5°C to +40°C and were tested per EN 60335-1 and UL 962.ST-P 21/700: Stainless steel plate stand with two rod design. Height adjustable. For more safety, the drive unit cannot be twisted sidewise or rotated.*with optional adapter
Type addition EC (STANDARD DISPERSING HEADS): The universal geometry uses two rows of teeth, is suitable for a large spectrum of laboratory applications, and it is reliable and efficient.Type addition BEC: High-turbulence mixing head, suitable for suspension of solid particles and for high viscosity applications.Type addition W: Dispersing head for fibrous and tough materials.Type addition SYN (SYNTHETICS): Disposable dispersing heads for theprocessing of multiple samples per day, where the required sterilization of stainless steel dispersing heads represents a significant time limitation. Available in PES / Special POM. Sterile packed.Type addition E: Coupling type EType addition F: Coupling type F*sterile
Cost effective dispersing unit for applications with operating volumes up to 10 liters. The powerful motor is useful for sample preparation and also for formulation in scale-up matters. More than 30 dispersion aggregates with different geometries, designs, sizes, materials and coatings are available for selection. The electronic control system continuously compares the pre-selected rpm speed with the actual speed and adjusts it so that the speed remains constant even as the viscosity increases.Aggregate tip speeding up to 34 m/sSoft start to prevent splashing of homogenate from sample vesselIntegrated overheating, overload and blocking protectionSpeed remaining constant even when viscosity changesAggregate replacement using one-handed quick-release coupling (type F)Insulated motor housing keeps motor noise to a safe, approved level during operationVarious models of EasyClean dispersing aggregatesApplications: General homogenisation applications (dispersion and emulsification), Formulation of lotions, creams and food, Production of oil-water emulsions, Dispersion of small quantities from plants, animals or human tissueStand and Dispersing heads must be ordered separately.