Homogenisers, Mini series, borosilicate glass 3.3
CHF 166.00*
Content:
1
Delivery according to order confirmation
Product number:
9164542
Manufacturer:
GPE Scientific Limited
Packaging information:
Length:
174 mm
Width:
58 mm
Height:
45 mm
Weight:
0.03 kg
Description
Manufactured from high quality borosilicate glass this range of mini homogenisers is ideal for micro tissue work. Bodies are clear precision glass. Pestles have ground glass working length. With or without handles. Fully autoclavable.
Grinding clearance pestle and mortar 0.152mm to 0.254mm.
Grinding clearance pestle and mortar 0.152mm to 0.254mm.
Properties
| Capacity ml: | 1.0 |
|---|---|
| Description: | with handle |
| Manufacturer Article Number: | 20402 |
| Mortar L x o.d. mm: | 105 x 10 |
| Pestle L x o.d. mm: | 150 x 5.00 |
Skip product gallery
LLG-Micropestles, stainless steel
From
CHF 49.90*
Disposable pellet pestles, PP
From
CHF 158.00*
Disposable pellet pestles, PP, with reaction tube
From
CHF 192.00*
Dounce homogenizers
From
CHF 233.00*
Homogenisers, Dounce, glass
From
CHF 465.00*
Glass mortar for dounce homogenizers
From
CHF 100.00*
Homogenisers, Duo-Form, Borosilicate glass 3.3
From
CHF 187.00*
Tissue Grinders System
From
CHF 251.00*
Potter-elvehjem homogenisers, Borosilicate glass
From
CHF 147.00*
Similar products
Polished stainless steel, micropestles. Precisely fitted for Eppendorf Safe-Lock Tubes™, manufactured in one-piece, smooth handle sections, can be disinfected easily. Minimum homogenate displacement due to tapered piston.For Reaction tubes:For homogenisation of cells, tissues or foodstuffs / feed samples.For tubes with 0.5 ml, 1.5 ml, and 2.0 mlCan be cooled down to -196 °CSterilisable in an autoclave or dry heat at 200 °CSuitable for PCR applicationsAlternative to single-use plastic pestlesPerfectly suitable for Eppendorf Safe-Lock Tubes
Autoclavable. Suitable for battery-operated drive motor.
Autoclavable. Suitable for battery-operated drive motor.
Glass. Suitable if the nuclei are to be maintained after homogenising.Two pestles are supplied:For pre-grindingFor fine grindingSpare components are available and are completely interchangeable.
For fine particle size reductions without damage to cell nuclei. Supplied with interchangeable pestles ground and polished to large' and small' clearances for use in the same tube. Includes 2 larges pestle used for sample preparation and 2 tight pestles for final homogenate.
Suitable if the nuclei are to be maintained after homogenising.
The pestles are conicaly shaped at the tip and cylindrically shaped in the upper part. This combination gives two separate areas, one for initial grinding and a second for final homogenisation.
For safety grinding of any cells by minimal temperature rising. Closed System (CS) for minimizing the risk of personal contact with aerosols and sample overflow while grinding. Optimal contact of grinder and conical sample tube (15 or 50ml) to grind each cell in the best way.Each unit is gamma sterilized and comes with a fully assembled pestle , conical sample tube (PP), solid top cap (HDPE) and label.Type CS1: Tip from glass-filled PP (30%/70%) for standard grindingType CS2: Vitrified tip (cast silica) for harder grinding
Potter-elvehjem homogenisers are designed to work with soft tissuePrecision Bore Borosilicate glass mortars with a range from 5.0 to 55ml capacityPTFE PestleStandard stainless steel rod for use with an electric motorOptional stainless steel handle for manual grindingAll parts are fully autoclavableGrinding Clearance Pestle and Mortar: 0.076 to 0.126mm