Homogenisers with PTFE or glass pestles | Capacity ml: 15

For use with all homogeniser drive-units or for schuett homgenplus.
Homogenisers and pestles provide a precise shape and are consequently separately exchangeable. Clearance between pestle and homogeniser is between 0.18 and 0.23 mm.

Homogeniser with PTFE pestle
Tapered or cylindrical. Shaft made of stainless steel. Inert. Elastic. With smooth, wax-like, moisture-rejecting surface. Resistant against high temperatures. Also available as glass fiber reinforced model. Highly efficient with especially tough tissue.

Homogeniser with glass pestle
Tapered or cylindrical. With robust glass shaft. Ground-glass surface in cylindrical/tapered part. Highly efficient with tough tissue.

Homogenizers and pestles also available individually as spare parts.


Glass mortar Type 1:
With flared overflow neck and spout, conical
Glass mortar Type 2:
Without flared overflow neck, cylindrical
Glass mortar Type 3:
With flared overflow neck and spout, cylindrical
Glass mortar Type 4:
Round bottom, with flared overflow neck, without spout, cylindrical

*glass-fibre reinforced
Capacity ml: 15
Figure: 2
Form: PTFE pestle cylindrical*
Glass mortar type: 3
Manufacturer Article Number: 3214152

Accessories

Bohlender GmbH
Ground Joint GL Adapters, PTFE
Black, PPS screw cap with GL45 thread or blue PP, screw cap with GLS80 thread, movable insert with ground joint made of PTFE. Transition from a ground joint to a glass thread. The body can be turned independently from the screw cap. The complete, assembled adapter can be removed and fixed onto another bottle without the risk of disarranging the tubing. Very good chemical resistance, for working temperatures up to max. +250 °C.
From CHF 65.50*

Similar products

LLG-Micropestles, stainless steel
Polished stainless steel, micropestles. Precisely fitted for Eppendorf Safe-Lock Tubes™, manufactured in one-piece, smooth handle sections, can be disinfected easily. Minimum homogenate displacement due to tapered piston.For Reaction tubes:For homogenisation of cells, tissues or foodstuffs / feed samples.For tubes with 0.5 ml, 1.5 ml, and 2.0 mlCan be cooled down to -196 °CSterilisable in an autoclave or dry heat at 200 °CSuitable for PCR applicationsAlternative to single-use plastic pestlesPerfectly suitable for Eppendorf Safe-Lock Tubes
From CHF 49.90*

Disposable Pellet pestles, PP, with reaction tube
Autoclavable polypropylene. Suitable for battery-operated drive motor (9.314 496). Pestle length 7cm. Supplied with reaction tube, except Cat. No. 9.314 492 and 9.314 493.
From CHF 154.00*

Dounce homogenizers
Glass. Suitable if the nuclei are to be maintained after homogenising.Two pestles are supplied:Pestle "A" for pre-grindingPestle "B" for fine grindingSpare components are available and are completely interchangeable.* Mortar length (mm)
From CHF 283.00*

Homogenisers, Dounce, glass
For fine particle size reductions without damage to cell nuclei. Supplied with interchangeable pestles ground and polished to large' and small' clearances for use in the same tube. Includes 2 larges pestle used for sample preparation and 2 tight pestles for final homogenate.
From CHF 447.50*

Spare components for dounce homogenizers
Glass. Suitable if the nuclei are to be maintained after homogenising.Pestle "A" for pre-grindingPestle "B" for fine grinding
From CHF 70.40*

Potter-elvehjem homogenisers, Borosilicate glass
Potter-elvehjem homogenisers are designed to work with soft tissuePrecision Bore Borosilicate glass mortars with a range from 5.0 to 55ml capacityPTFE PestleStandard stainless steel rod for use with an electric motorOptional stainless steel handle for manual grindingAll parts are fully autoclavableGrinding Clearance Pestle and Mortar: 0.076 to 0.126mm
From CHF 141.40*

Micro pestles, CTFE / stainless steel
Reusable, for 500µl and 1.5ml reaction tubes. Autoclavable CTFE / stainless steel. Suitable for battery-operated drive motor (9.314 496).
From CHF 192.00*

Tissue Grinders System
For safety grinding of any cells by minimal temperature rising. Closed System (CS) for minimizing the risk of personal contact with aerosols and sample overflow while grinding. Optimal contact of grinder and conical sample tube (15 or 50ml) to grind each cell in the best way.Each unit is gamma sterilized and comes with a fully assembled pestle , conical sample tube (PP), solid top cap (HDPE) and label.Type CS1: Tip from glass-filled PP (30%/70%) for standard grindingType CS2: Vitrified tip (cast silica) for harder grinding
From CHF 245.00*

Homogeniser drive unit, schuett homgenplus
Potter Elvehjem & Dounce. Safe homogenisation without much effort, for gentle digestion of biological samples and tough, difficult to homogenize material, so that a high proportion of intact cell nuclei can be isolated.Large stability, vibration-free due to robust 3-fold stand construction4-digit display for reproducible homogenisationEasy handlingSteplessly adjustable, electronic speed control from 40 - 3000 min-1 High torque drive, powerful even at low speedsFlexible useLarge selection of conical and cylindrical homogenizers and pestle (PTFE, glass and also glass fibre reinforced)Tubes with volumes from 1.5 to 40 ml and outer diameters from 10 to 40 mm can be usedUse of Eppendorf® microreaction vessels with 1.5 ml possibleChuck with hollow shaft for quick and easy pestle change and the use of different shaft lengths and diametersFor optimum cooling, the cooling vessel can be filled with ice or ice waterSupplied with: schuett homgenplus homogeniser drive unit with universal keyless chuck, incl. cooling vessel, 1000 ml and universal chuck set (consisting of 6 sizes).We also offer a sterile alternative for use in a glove box and with infectious material. Details on request.
From CHF 320.30*