Joint clips for conical joint sleeve connections, stainless steel | Type: Without locking screw
CHF 30.20*
Content:
1
42 Available. Delivery time: 5-7 workdays
Product number:
9011688
Manufacturer:
Lenz-Laborglas GmbH & Co. KG
Packaging information:
Length:
12 mm
Width:
28 mm
Height:
25 mm
Weight:
0.034 kg
Description
Properties
| Ground size: | NS29/32 |
|---|---|
| Manufacturer Article Number: | 01103529 |
| Material: | Stainless steel |
Skip product gallery
KECK™ Clips for conical joints, spring steel
From
CHF 9.90*
Joint clips KECK, POM, for conical ground joints
From
CHF 4.80*
PTFE sealing rings for jointed glassware
From
CHF 36.30*
LLG-Joint clips, POM, for conical ground joints
From
CHF 22.40*
Joint grease, K.W.S
From
CHF 19.00*
BUDDE - joint grease
From
CHF 30.90*
Sleeves, cone joint, PTFE
From
CHF 9.50*
Fork clamps for spherical joints
From
CHF 20.80*
LLG-Fork clamps for spherical joints
From
CHF 9.80*
Sleeves with ribs, PTFE
From
CHF 2.00*
Similar products
For applications with very high temperatures. Easy to fit, dimensionally stable.
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage
For an easy and safe fixing of jointed glassware.
Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.
For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.
With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.
Material: stainless steel. For spherical ground joint connections. With set screw.
Made of stainless steel 304. For spherical ground joint connections. With set screw.
For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.