LLG-Inline filters, PTFE
CHF 95.00*
Content:
20
Delivery according to order confirmation
Product number:
4685658
Manufacturer:
LLG Labware
Packaging information:
Length:
187 mm
Width:
160 mm
Height:
125 mm
Weight:
0.41 kg
Description
LLG-Inline filters with PP housing. The PTFE membrane is particularly suitable for filtration of aggressive chemicals, including acids and non-aqueous solutions. Also ideal for clarifying filtration of organic solutions, sterile filtration of gases, as well as sterile aeration and deaeration.
- Multiple autoclavable at 121 °C for 20 minutes at 2 bar, max. 3 cycles
- High throughput with low pressure drop
- For air and gases in both directions
Properties
| Autoclavable: | Yes |
|---|---|
| Connetion inlet: | Hose barb |
| Connetion outlet: | Hose barb |
| Filter area: | 20 cm² |
| Manufacturer Article Number: | 4685658 |
| Material housing: | PP |
| Material membrane: | PTFE |
| Membrane Ø: | 50 mm |
| Pore size: | 0,22 µm |
| UNSPSC: | 41104901 |
Skip product gallery
In-line filters Midisart® 2000
From
CHF 158.40*
In-Line-Filter, disposable, Polydisc TF™
From
CHF 216.00*
In-line filters Midisart® 2000 with NPT 1/8" connection
From
CHF 188.20*
In-Line Filter holder, PC
From
CHF 400.00*
Similar products
For sterile ventilation of fermenters, culture vessels, etc. or to act as a water barrier between the suction flask and the vacuum pump in filtration applications. The supported PTFE membrane within a PP housing gives excellent chemical resistance. Filter in either direction (3 bar max. pressure).Stepped horse-barb of 6-12 mm on either sidessterile single packed filters, autoclavable
Mounted in a robust PP housing. All have a low hold-up volume. Dimensions: (diameter x length) 53 x 46mm.Connections: For 6mm to 10mm diameter bore tubing. Also accept male luer slip.Hydrophobic PTFE membranePore sizes 0.1µm, 0.2µm, 0.45µm, 1.0µm1µm pore size unit has a PP prefilterAutoclavable at 131°C for 20 minutesMaximum operating pressure 4.0 barSuitable for chemically aggressive solutions, reagents and organic solvents. Ideal for protective venting, in-line filtration and isolation applications. Non-sterile.
For sterile ventilation of fermenters, culture vessels, etc. or to act as a water barrier between the suction flask and the vacuum pump in filtration applications. The supported PTFE membrane within a PP housing gives excellent chemical resistance.Filter in either direction (3 bar max. pressure).sterile single packed filters, autoclavable
The filter holder made of PC is suitable for filtration of aqueous solutions. The bell-shaped base part protects the filtrate from contamination. Hose nipples can be replaced by Luer connectors to use as syringe filter holder.Suitable for Ø 50 mm filterConnection to peristaltic pump or pressure container possibleM 12x1 female threadMax. operating pressure 7 barAutoclavable