LLG-Petri dishes, PS
CHF 198.10*
Content:
1080
60 Available. Delivery time: 5-7 workdays
Product number:
4678371
Manufacturer:
LLG Labware
Length:
586 mm
Width:
345 mm
Height:
380 mm
Weight:
7 kg
* Specifications refer to the packaging unit
Made of high quality optical clear polystyrene. Produced under aseptic conditions in an ISO 6 cleanroom.
For research and development only.
- With a smooth surface for an optimal distribution of the transport medium
- Stable thickness to prevent any deformations while using
- Stackable
- With or without vents
- Aseptic (Ø 90 mm), non-sterile (Ø 60 mm) or beta irradiated sterile versions (all sizes)
- Packed in sleeves á 10 dishes or 20 dishes (Ø 90 mm)
For research and development only.
| Dimensions (ØxH): | 60 x 14 mm |
|---|---|
| Dual Use: | 0 |
| Height: | 14 mm |
| Manufacturer Article Number: | 4678371 |
| Material: | PS |
| Sterile: | Yes |
| UNSPSC: | 41122101 |
| With vents: | Yes |
| Ø: | 60 mm |
Other customers also bought
LLG Labware
LLG-Petri dishes, soda-lime glass
Suitable for applications in the cultivation of bacteria, yeasts and fungi, as well as cell cultures. Hydrolytic resistance: class HGB 3 according to ISO 719, type III according to USP.
Similar products
Made of high quality optical clear polystyrene. Produced under aseptic conditions in an ISO 6 cleanroom.With a smooth surface for an optimal distribution of the transport mediumStable thickness to prevent any deformations while usingStackableWith or without ventsAseptic (Ø 90 mm), non-sterile (Ø 60 mm) or beta irradiated sterile versions (all sizes)Packed in sleeves á 10 dishes or 20 dishes (Ø 90 mm)For research and development only.
Cooling incubator with compressor technology for safe and reproducible incubation even at high ambient temperatures. Thanks to extensive programming options and homogeneous incubation conditions, the cooling incubator is suitable for a wide range of applications.APT.line™ preheating chamber technologyHot air disinfection at 100 °CAdjustable fan speedController with time-segment and real-time programmingInner door made of tempered safety glass2 stainless steel racksClass 3.1 independent temperature safety device (DIN 12880) with visual and audible alarmComputer interface: Ethernet
Cooling incubator with Peltier technology combines exceptional performance with low energy consumption and environmental friendliness.APT.line™ preheating chamber technologyHot air disinfection at 100 °CAdjustable fan speedController with time-segment and real-time programmingInner door made of tempered safety glass2 stainless steel racksClass 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarmComputer interface: EthernetData recording and USB interface
Digital mini incubator with cooling and heating function for cultivation of biological samples in small-volume vessels. With internal power outlet for positioning small shakers, mixers, or other devices in the inner chamber. Due to its small footprint, the LLG-uniINCU 20 cool is ideal for small laboratories and educational institutions.Good temperature stability of the set temperature (up to 15 °C below ambient temperature) in the inner chamber of the cooling incubatorLarge inner chamber with 22 l capacityFast heating and homogeneous temperatureWith built-in calibration function of up to ±5 °CTemperature accuracy is ±0.5 °C (at 37 °C)Temperature uniformity is ±1.5 °C (at 37 °C)Scope of supply: Incubator, 1 x shelf, 1 x drip tray, 1 x power supply unit, 1 x power cable, operating instructions
Thanks to the sophisticated Advanced Peltier Technology from Memmert, the IPPeco is the most energy-efficient and simultaneously the most powerful cooled incubator of its kind.Compared to similar appliances, its heat-up, cool down and recovery times are much shorter.The Peltier-cooled incubator saves on operating costs, ensures sample quality and makes work in a microbiological laboratory significantly more efficient.9 model sizes (32 to 2140 litres volume)2 model variants: SingleDISPLAY and TwinDISPLAYDouble doors as standard with fully insulated stainless steel, inside glass: prevention of contamination and drops or rises in temperature, and at the same time an optimal view of the sensitive load through wide-area interior glass doors (size 1400/2200 stainless steel doors with glass sector; sizes 750, 1060 and 1400 two leaves, size 2200 three leaves)Fans integrated in the Peltier elements ensure rapid energy transfer and optimum temperature distributionTwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.com
For incubation and test applications below ambient temperature as well as standard incubation applications at 37 °C in warm environments.Available in 2 sizes as tabletop or standalone unitStandalone unit has lockable casters for easy mobilityDoor with viewing windowMicroprocessor control for precise temperature adjustmentTimer functionTemperature alarm, overtemperature shutdownPort hole on the right side of the device for inserting monitoring probes or cablesRS232 data interface for temperature monitoring (software not included in delivery)IQ and OQ documentation and qualification service availableAutomatic defrostingOverheating protection in fan motor
The units are suitable for apptications in the pharmaceutical or life science sector. Optimal incubation conditions due to temperature and humidity control.Stainless steel interior and shelvesGlass doorDirected horizontal airflow systemAdjustable defrost timerOver- and under-temperature protectionRefrigerant R-513AAccess port Ø 54 mm
Cooled incubator with class A+ energy efficiency. Especially designed for BOD measurements.Fixed temperature of 20 °C.For up to 3 x BOD sensor system 6 bottles or 2 x BOD sensor system 10 bottles2 internal sockets for further devicesForced ventilation for uniform temperature distribution2-digit display for indoor temperatureHigh efficiency, low operating costsScope of supply: Cooled incubator, 2 shelves