Measuring cylinders, PMP, tall form, class B, white graduations
CHF 14.10*
Content:
1
72 Available. Delivery time: 5-7 workdays
Product number:
6243185
Manufacturer:
Kartell S.p.A.
Packaging information:
Length:
320 mm
Width:
89 mm
Height:
73 mm
Weight:
0.076 kg
Description
Clear. Conforms to ISO 6706 - 1981 (E).
- Good chemical resistance
- For liquids up to 170 °C
- Pentagon base
- Food-safe
- Autoclavable
Properties
| Autoclavable: | Yes |
|---|---|
| Colour: | Crystal clear |
| Colour graduation: | White |
| Division: | 20 ml |
| Food safe: | Yes |
| Height: | 315 mm |
| Manufacturer Article Number: | 0157400 |
| Material: | PMP |
| Max. temperature resistance: | 170 °C |
| Nominal capacity: | 250 ml |
| Shape (Weighing bottles, Measuring/Mixing cylinders, Crucibles): | Tall |
| Temperature resistance: | 170 °C |
| Tolerance: | 2.0 ml |
| UNSPSC: | 41121805 |
Skip product gallery
Measuring cylinders, PP, tall form, class B, blue graduated
From
CHF 2.90*
Measuring cylinders, borosilicate glass 3.3, tall form, class A, blue graduated
From
CHF 10.30*
Measuring cylinders, DURAN®, tall form, class B, blue graduation
From
CHF 11.60*
Graduated cylinders, PP, tall form, class B, embossed scale
From
CHF 5.00*
Measuring cylinders, PP, tall form, class B, blue moulded graduations
From
CHF 5.40*
Measuring cylinder with plastic socket, DURAN®, class A, blue graduation
From
CHF 12.00*
Measuring cylinders, DURAN®, tall form, class A, blue graduation
From
CHF 14.30*
Measuring cylinders, borosilicate glass 3.3, low form, class B, amber graduations
From
CHF 73.30*
Measuring cylinders, DURAN®, low form, class B, amber stain graduation
From
CHF 12.20*
Measuring cylinders, Borosilicate glass 3.3, tall form, class B, white graduation
From
CHF 15.20*
Similar products
Tall form, highly transparent, with blue graduations, hexagonal base, calibrated to contain (IN). Tolerances class B according to DIN 12681 / ISO 6706. Exposure to temperatures above 60 °C may effect accuracy. Cleaning up to max. 60 °C is recommended to preserve marks and inscriptions.
Conformity certified with batch IDDIN EN ISO 4788Hexagonal foot with spoutCalibrated to contain (IN)Inscriptions are printed with blue enamelBatch certificate can be downloaded from website
IN (TD) calibrated. With spout and hexagonal glass base, short line. Tolerances better than class B requirements. Graduation in durable blue enamel, acc.to DIN EN ISO 4788.
Transparent. Exposure to temperatures up to 80°C will not cause permanent exceeding of tolerance limits! Cleaning temperature below 60°C is recommended to preserve marks and inscriptions.DIN 12681 and ISO 6706Calibrated to contain (TC, In)
Highly transparent. With easily readable, raised, embossed blue scale and ring marks at the primary scale points. Calibrated 'In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. To preserve markings, do not clean at temperatures exceeding 60ºC.Food-safe product according to regulation (EU) No. 10/2011.
With spout, removable plastic socket and protective ring. Blue graduation marks, calibrated for IN, acc. to DIN EN ISO 4788.
IN (TD) calibrated. With spout and hexagonal glass base. Main point ring graduation. With dated batch identification. Declaration of conformity acc. to DIN 12600. Graduation in durable blue enamel, acc.to DIN EN ISO 4788.For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.com. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available. Also available with dated batch identfication acc. to USP (US Pharmacopeia).
Silberbrand EternaDIN EN ISO 4788With spout and hexagonal footGraduations and inscriptions in Eterna permanent amber stainCalibrated to contain IN
IN (TC) calibrated. With spout and hexagonal glass base. Tolerances better than class B requirements. Short line graduation. With durable amber stain graduation, DIN EN ISO 4788.
Flawless spout design assures pouring without any drips. Thick and durable polypropylene base reduces the risk of breakage during use and cleaning. Base perfectly fits the cylinder body and can easily be dismantled.