Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC controller

CHF 3,643.00*

Content: 1

Prices excl. VAT plus shipping costs

Delivery according to order confirmation

Product number: 4686931

Manufacturer: Snoltherm UAB

Packaging information:

Your personal consultant

Thomas Dinkel

Tel. +41 (0) 22 309 00 60

thomas.dinkel@vdc-faust.ch

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.

Side, top or down-opening door depending on model

Outer casing made of powder-coated sheet metal

Ceramic bottom plate

Control panel in the lower part of the oven

Incl. door safety switch

Fast heating time

Good stability and temperature distribution

Low power consumption

With basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)

Depth int.:	335 mm
Door opening:	To the left
Ext. depth:	710 mm
Ext. height:	560 mm
Ext. width:	500 mm
External dimensions (WxDxH):	500 x 710 x 560 mm
Height int.:	170 mm
Int. width:	190 mm
Internal dimensions (WxDxH):	190 x 335 x 170 mm
Manufacturer Article Number:	ALSM0121001827
Max. temperature:	1300 °C
Max. voltage:	230 V
Nominal capacity:	10 l
Plug type:	EU
Power supply:	230 V, 50 Hz
Power supply frequency:	50 Hz
Rated capacity:	2400 W
Type:	SNOL 10/1300 LSM01
Type of auxiliary energy:	Mains connection
UNSPSC:	40101805
Weight:	38 kg

Variants table
Buy	Unit price	Content	Delivery time	Preview	Product number

Other customers also bought

Snoltherm UAB

Muffle furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.Side, top or down-opening door depending on modelOuter casing made of powder-coated sheet metalCeramic bottom plateControl panel in the lower part of the ovenIncl. door safety switchFast heating timeGood stability and temperature distributionLow power consumptionWith basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)

From CHF 4,523.00*

Snoltherm UAB

Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller

From CHF 2,943.00*

Snoltherm UAB

Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller

From CHF 3,327.00*

Snoltherm UAB

Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller

From CHF 1,601.00*

Snoltherm UAB

Muffle furnaces SNOL 10/1300, up to 1300 °C, Omron E5CC-T controller

Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.Side, top or down-opening door depending on modelOuter casing made of powder-coated sheet metalCeramic bottom plateControl panel in the lower part of the ovenIncl. door safety switchFast heating timeGood stability and temperature distributionLow power consumptionWith temperature controller Omron E5CC-T: programmable PID controller with 8 programmes and 32 programming segments

From CHF 7,493.00*

Snoltherm UAB

Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller

From CHF 2,517.00*

Snoltherm UAB

Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller

From CHF 1,781.00*

Similar products

Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller

From CHF 2,943.00*

Muffle Furnaces Series LE 1/11 - LE 24/11 up to 1100 °C

Compact muffle furnaces with dual shell furnace housing of rust-free stainless steel and heating elements encased in quartz glass tubes.Tmax 1100 °C, working temperature 1050 °CHeating from two sides from heating elements in quartz glass tubesMaintenance-friendly replacement of heating elements and insulationInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and high stabilityFlap door which can also be used as a work platformExhaust air outlet in rear wallCompact dimensions and light weightController mounted under the door to save spaceEquipped with the basic controller R 7 with one free storeable temperature, which is dwelled until the controller is switch offStandard power supply 230 V, 1/N/PE, 50/60 HzExternal dimensions vary for versions with additional equipment. Dimensions on request.

From CHF 1,891.00*

Collecting Pans for Muffle and Ashing Furnaces

Ceramic collecting pans for temperatures up to max. 1300 °C, steel collecting pans for temperatures up to max. 1100 °C.

From CHF 126.00*

Tube Furnaces with Stand

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, and their compact design, also make these tube furnaces suitable for integration into existing process systems.Vertical or horizontal operation freely adjustableWorking height freely adjustableWorking tube made of C 530 ceramicControl system integrated in furnace baseNTLog Basic for Nabertherm controller: recording of process data with USB-flash driveEquipped with the programmable controller B 510 (with touch panel, 5 programmes with 4 segments each), optionally available with the C 550 controller (with touch panel, 10 programmes with 20 segments each)

From CHF 9,100.00*

Computerausrüstung, Elektronik, Hardware, Computerausrüstung, Elektronik, Hardware, Computerausrüstung, Elektronik, Hardware, Computerausrüstung, Elektronik, Hardware, Computerausrüstung, Elektronik, Hardware, Computerausrüstung, Elektronik, Hardware

Muffle furnaces series L, max. 1100 °C, with flap door

For daily laboratory use. Models with flap door or lift door available, for temperatures from 1100 °C to 1400 °C. Equipped with programmable controllers B 510 (with touch panel, 5 programmes with 4 segments each), or C 550 (with touch panel, 10 programmes with 20 segments each), L 1/12 with controller R 7 (continuous operation).Dual shell housing made of textured stainless steel sheets for low external temperatures and high stabilityAdjustable air inlet integrated in doorExhaust air outlet in rear wall of furnaceSolid state relays provide low-noise operationStandard connector 230 V 1/N/PE 50/60 Hz24 and 40 l with 400 V 3/N/PE 50/60 HzOptional:Chimney, chimney with fan or catalytic converterOver-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadProtective gas connection to purge with non-flammable protective or reaction gases (not available in combination with chimney, chimney with fan or catalytic converter)Manual or automatic gas supply systemProcess control and documentation via VCD software package for monitoring, documentation and controlCeramic heating plates with integrated heating wire, splash and exhaust protected, easy to replaceHeating from two sides (three sides for interior volumes of 24 and 40 l)Flap door can be used as work platformExternal dimensions vary for versions with additional equipment. Dimensions on request.

From CHF 3,911.00*

Charging rack for ashing furnaces

Charging rack to load the furnace in different levels, including holders to insert and remove the trays.

From CHF 1,281.00*

Tube Furnaces

These compact tube furnaces with integrated control systems can be used universally for many processes. Equipped with a standard working tube of C 530 ceramic and two fiber plugs, these tube furnaces have an unbeatable price/performance ratio.Tmax 1200 °C or 1300 °CSingle-zoned design as standardDual shell housing made of sheets of textured stainless steelOuter tube diameter of 50 to 170 mm, heated length from 250 to 1000 mmWorking tube of C 530 ceramic including two fiber plugs as standard equipmentSolid state relays provide for lownoise operationAvailable with the programmable controllers B 510, C 550 and P 580 (for three-zoned design) with adjustable ramps and hold timesStandard power supply 400 V 3/N/PE 50/60 Hz (R 50/250 und R 50/500: 220 V, 1/N/PE, 50/60 Hz)Option:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadCharge control with temperature measurement in the working tube and in the furnace chamber outside the tubeThree-zoned design (heated length from 500 mm)Working tubesGas supply systems for protective gas or vacuum operationProcess control and documentation with VCD software package

From CHF 4,949.00*

Muffle furnaces series LT, max. 1100 °C, with lift door

For daily laboratory use. Models with flap door or lift door available, for temperatures from 1100 °C to 1400 °C. Equipped with programmable controllers B 510 (with touch panel, 5 programmes with 4 segments each), or C 550 (with touch panel, 10 programmes with 20 segments each), L 1/12 with controller R 7 (continuous operation).Dual shell housing made of textured stainless steel sheets for low external temperatures and high stabilityAdjustable air inlet integrated in doorExhaust air outlet in rear wall of furnaceSolid state relays provide low-noise operationStandard connector 230 V 1/N/PE 50/60 Hz24 and 40 l with 400 V 3/N/PE 50/60 HzOptional:Chimney, chimney with fan or catalytic converterOver-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadProtective gas connection to purge with non-flammable protective or reaction gases (not available in combination with chimney, chimney with fan or catalytic converter)Manual or automatic gas supply systemProcess control and documentation via VCD software package for monitoring, documentation and controlCeramic heating plates with integrated heating wire, splash and exhaust protected, easy to replaceHeating from two sides (three sides for interior volumes of 24, 40 and 60 l)The hot side of the lift door is facing away from the operatorExternal dimensions vary for versions with additional equipment. Dimensions on request.

From CHF 4,278.00*

Ribbed plates for muffle and ashing furnaces, ceramic

For temperatures up to max. 1200 °C.

From CHF 60.60*

Ashing/Burn off furnaces LV 3/11 - LVT 15/11

The models LV 3/11 - LVT 15/11 are especially designed for ashing in the laboratory. A special air intake and exhaust system allows air exchange of more than 6 times per minute. Incoming air is preheated to ensure a good temperature uniformity.Tmax 1100°CHeating from two sidesCeramic heating plates with integral heating element which is safeguarded against fumes and splashing, and easy to replaceInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and stabilityOptional flap door (LV) which can be used as work platform or lift door (LVT) with hot surface facing away from the operatorSolid state relays provide for low noise operationAir exchange of more than 6 times per minuteGood temperature uniformity due to preheating of incoming air220-240 V 1/N/PE 50/60 Hz connector as standardOption:Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and loadObservation hole in the oven doorProcess control and documentation via VCD software package for monitoring, documentation and controlHeight incl. exhaust tube (diam. 80 mm)External dimensions vary for versions with additional equipment. Dimensions on request.

From CHF 3,803.00*