NMR tubes, 3 and 5mm, borosilicate glass 3.3, KIMAX®-HQ
CHF 183.00*
Content:
5
Delivery according to order confirmation
Product number:
9400326
Manufacturer:
DWK Life Sciences GmbH (Kimble)
Packaging information:
Length:
242 mm
Width:
71 mm
Height:
15 mm
Weight:
0.045 kg
Description
Our KIMAX®-HQ NMR tubes are our highest quality NMR tubes and are 100% gauged for wall thickness, concentricity and camber specifications.
- High-Quality NMR tubes
- Attached polyethylene caps
- Sandblasted marking spot
- Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements
Properties
| Ext. Ø: | 3.0124 mm ± 0.013 |
|---|---|
| Ext. Ø: | 3.0124 mm |
| Frequency: | 500 MHz |
| Int. Ø: | 2.4003 mm |
| Int. Ø: | 2.4003 mm ± 0.013 |
| Length: | 203 mm |
| Manufacturer Article Number: | 897835-0008 |
| Material: | Boro 3.3 |
| Max. frequency: | 500 MHz |
| Tolerance ext. Ø: | 0.013 mm |
| Tolerance int. Ø: | 0.013 mm |
| Wall thickness: | 0,284 mm |
Skip product gallery
NMR tubes, 5 mm, DURAN®, Economic
From
CHF 3.80*
NMR tubes, diameter 3 and 5 mm borosilicate glass 3.3, standard
From
CHF 237.00*
NMR Tubes, 5 mm, Wilmad, Precision
From
CHF 98.40*
NMR Tubes 5 mm, Wilmad, Economy
From
CHF 41.80*
NMR Tubes, 5 mm, Wilmad®, High Throughput
From
CHF 209.00*
Similar products
NMR tubes are available, according to requirement, in three accuracy classes. The correct tube can be selected depending on magnetic field and spin. The tubes are noteworthy for their close tolerances and accuracy, especially to their straightness, wall thickness and wall thickness distribution. Consequently, quick and accurate test results are achievable. With retrace code.The disposable for economical use in fully automatic sample dispensers or where high throughputs are involved.
The NMR tubes are produced with high precision. They are suitable for routine measurements, high-throughput measurements or NMR systems with autosampler at measurement frequencies up to 600 MHz. The tubes are manufactured from borosilicate glass 3.3 which is conform to USP Type I and ASTM E438, Type I, Class A. Please order closing caps separately.
Thin-walled Precision NMR tubes. To maximize Signal-Noise-Ratio, Precision NMR tubes have minimal paramagnetic impurities that would impact shimming. For experiments requiring critical shimming quality (high/ultrahigh field, nonspinning, multi-dimensional, multi-nuclei, DNP experiments and studies involving biological samples).Made from borosilicate glass, ASTM E438 Type 1 Class AHydrolytic class 1Inner surface is resistant to strong acid and base at ambient temperatureFor temperatures up to 230 °C and within a temperature step of 120 °CInclude disposable caps
The thin walled Wilmad Economy NMR tubes are designed for routine use in all NMR spectrometers. They fit tightly in any spinner turbine and have zero NMR background. For experiments with small organic molecules (Molecular Weight ~500) at ambient temperatures. Cooling/heating of these tubes may lead to breakage.Made from borosilicate glass, ASTM E438 Type 1 Class B standardCamber and concentricity values listed are the Total Indicator Reading (TIR)Includes disposable caps
The thin-walled high-throughput Wilmad® NMR tubes have an average camber of 60 microns to guarantee the clarity of the spectrum for small molecule (MW <250) samples up to 600 MHz. Designed for routine use in most low to mid field NMR spectrometers.Made from borosilicate glass, ASTM E438 Type 1 Class B standardCamber and concentricity values listed are the Total Indicator Reading (TIR)Includes disposable capsWG-1000-7-SJ is supplied with authentic Bruker SampleJet cap