ORION™ conductivity and TDS standards
CHF 227.15*
Content:
5
Delivery according to order confirmation
Product number:
7661940
Manufacturer:
Thermo Elect.LED GmbH (Orion)
Packaging information:
Length:
224 mm
Width:
45 mm
Height:
100 mm
Weight:
0.383 kg
Description
For calibration of conductivity and TDS testers.
- All standards are NIST™ traceable
- When using the automatic calibration function on ORION™ software, the programmed temperature tables can be used
| Hazardous Substance Data | |
| H-Satz | EUH210 |
| P-Satz | P202 |
| SDS | Link |
Properties
| Manufacturer Article Number: | 011007 |
|---|---|
| Package contents: | 60 ml bottle |
| Type: | TDS, 1413 µS/cm |
Skip product gallery
LLG-Conductivity Solutions
From
CHF 27.40*
Conductivity standards, ISO 17025
From
CHF 60.70*
Conductivity calibration solutions
From
CHF 92.40*
Cleaning and storage solutions for pH electrodes
From
CHF 76.47*
Calibration and test material for conductivity measurements
From
CHF 163.00*
Orion™ calibration standards and TISAB solutions for ISE fluoride electrodes
From
CHF 144.60*
Standards and storing solutions for ammonia ISE electrodes
From
CHF 127.45*
Similar products
Values stated at 25°C: Accuracy ±1%Directly traceable to NISTCertificate including actual value, expiration date and uncertainty of measurementThe safety data sheets of these products are available under www.llg-labware.com.
Conductivity standards tested and ISO 17025 certified at 25 °C. Uncertainty of measurement of ± 1%. Directly traceable to N.I.S.T. Temperature dependence data is printed on the label as are lot numbers and expiry dates. Supplied in 500 ml HDPE bottle. 1.3 µS/cm in 250 ml bottle. Calibration values 84, 147, 1413, 12880 µS/cm. Control Values 1.3 - 350000 µS/cm.*1.25 - 1.35 µS/cm at 25 °C.
Disposable bags for effective calibration. Traceability according to NIST.
These solutions prolong life and restore performance of pH electrodes or are used for storage and cleaning.Cleaning solutionsCleaning solution A for removing protein contaminantsCleaning solution C for general cleaningCleaning solution D for removing oil and grease contaminantsSolutions are delivered with a small beaker and a plastic pipette.Storage solutionsEnsure the proper function of pH electrodes even after prolonged storage
Test resistors and calibration solutions to test the meters with conductivity function as well as to calibrate the system from the device and conductivity measuring cellOptimal measuring safety by PTB/NIST traceable standard solutionsEasy device check by highly precise test resistorsPharmacopeia conforming test kits
Calibration standards ensure measurement accuracy. TISAB (Total Ionic Strength Adjustment Buffer) solutions are used to adjust the ionic strength for fluoride measurements.
For ammonia ISE electrodes 9512BNWP and 9512HPBNWP.