Orbital shaker KS 260 control
CHF 3,965.00*
Content:
1
Delivery according to order confirmation
Product number:
4008035
Manufacturer:
IKA-Werke GmbH & Co.KG
Packaging information:
Weight:
10.8 kg
Description
Compact, low-level, platform shaker with highly effective, orbital motion, maximum capacity 7.5 kg. Large selection of attachments enable use with a wide variety of vessel shapes and sizes. Electronic speed control and timer adjustment.
Attachments are not included - Please order separately.
Attachments are not included - Please order separately.
- Separate digital speed and timer displays with operating mode indication
- Timer: 1 min to 99 h 59 min or continuous operation
- Controlled stop-point positioning function (enables use in automated robotic sampling routines)
- All functions can be controlled and documented using labworldsoft® software
- Interface: RS 232 / analogue
- Special variant with reverse rotation function available on request
Properties
| Depth: | 420 mm |
|---|---|
| Dimensions (WxDxH): | 360 x 420 x 98 mm |
| Display: | Digital |
| Height: | 98 mm |
| IP code: | IP 21 |
| Manufacturer Article Number: | 0002980303 |
| Max. loading capacity: | 7.5 kg |
| Max. permitted ambient temperature: | 50 °C |
| Max. relative humidity rate: | 80 % |
| Max. speed: | 500 1/min |
| Max. voltage: | 240 V |
| Min. permitted ambient temperature: | 5 °C |
| Min. speed: | 10 1/min |
| Min. voltage: | 220 V |
| Permitted ambient temperature: | 5 ... 50 °C |
| Plug type: | CH |
| Power supply: | 220 ... 240 V, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Rated capacity: | 45 W |
| Shaking stroke: | 10 mm |
| Speed: | 10 ... 500 1/min |
| Type: | KS 260 control |
| Type of movement: | Orbital |
| UNSPSC: | 41103811 |
| Weight: | 8.8 kg |
| Width: | 360 mm |
| With timer: | Yes |
Skip product gallery
From
CHF 36.50*
From
CHF 169.50*
From
CHF 197.80*
Accessories
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Clamps for IKA shakers and shaking incubators
Clamps for safe shaking of Erlenmeyer flasks.
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Accessories for shakers HS/KS 260
AS 260.1 Universal attachmentAble to hold most types of container using adjustable tension rollers. Surface: 320 x 320 mmAS 260.3 Petri dish attachmentFor gentle mixing and suspension of cell cultures or growth media in petri dishes, culture bottles and containers. With integral anti-slide mat (PP).
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Fixing clip platform AS 260.2
For shaking round bottom vessels, volumetric and Erlenmeyer flasks.Max. number of clips (capacity held): 56 x AS 2.1 (25 ml), 23 x AS 2.2 (50 ml), 23 x AS 2.3 (100 ml), 11 x AS 2.4 (250 ml), 9 x AS 2.5 (500 ml), 5 x AS 2.6 (1000 ml)Supplied without clips.
Skip product gallery
From
CHF 2,907.00*
From
CHF 5,881.00*
Other customers also bought
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Orbital shaker KS 130 control
Small, quiet running, low-friction shaker with effective orbital movement and a maximum loading of 2 kg.Electronic speed control and timer adjustmentDigital display for speed, timer function, and operating modesElectronic timer: 0 to 9 h 59 min or continuous mode (∞)All functions can be controlled and documented using labworldsoft® softwareSpecial variant with rotation reversal available on requestLarge selection of attachments for various vessel shapes and sizesInterface RS 232/analogueAttachments are not included - Please order appropriate attachment separately.Integral stop positioning function (automated sample removal by robot possible)
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Orbital shaker KS 501 digital
Low-profile laboratory shaker with large platform and 15 kg load capacity. With continuously adjustable speed range: 0 to 300 rpm, digital display and timer. Continuous operation is guaranteed even under extreme loads. Requires accessory attachments for operation (these are not supplied)Ideally suited for vessel sizes over 250 ml, e.g. round bottom flasks, erlenmeyer flasks, culture flasks, bottles etc. Developed for biological and microbiological growth tests and for production of stock solutions.Timer 0 to 56 minInterface RS 232
Skip product gallery
Clamps for IKA shakers and shaking incubators
From
CHF 36.50*
Flask Clamps, stainless steel
From
CHF 34.00*
Digital Orbital Shaker
From
CHF 1,969.00*
Orbital shaker KM CO2, with ribbon cable
From
CHF 2,950.00*
Fixing clip platform AS 501.4
From
CHF 1,505.00*
Orbital shaker KM 2
From
CHF 2,330.00*
Orbital Shaker PSU-10i
From
CHF 1,124.00*
Similar products
Clamps for safe shaking of Erlenmeyer flasks.
Clamps for Erlenmeyer flasks, Media bottles* and Fernbach flasks**. Incl. screws for easy attachment to platforms. Clamps for flasks with 50 ml and higher are supplied with a spring to hold the flask in place.
Electronically controlled and programmable shakersSlow, soft-start greatly decreases the risk of spillsErlenmeyer flasks, beakers, culture flasks and micro plates can easily be fixed using 8 rubber stripsDigital LCD display for speed and run time controlIntegrated overload shutdownPermanent motor feedback, which automatically adjusts the speed even if the load is changed during operationContinuous mode or timer for up to 49 hoursSoft rubber feet minimise system movementPlatform with non-slip surfacePlatform capacity:Erlenmeyer Flasks e.g.: 25 x 50 ml, 16 x 125 ml, 9 x 250 ml, 4 x 500 ml, 4 x 1000 ml, 1 x 2000 mlBeakers e.g.: 36 x 50 ml, 25 x 100 ml, 16 x 250 ml, 9 x 400 ml, 4 x 1000 mlDeep well assay plates e.g.: 6 x standard (more if stacking is an option)Supplied with: Orbital Shaker incl. universal attachment, universal power supply, non-slip rubber mat and 8 elastic ties
Stainless steel shaker with orbital shaking motion was specially designed for use in incubators with up to 20 % CO2 concentration and 95 % humidity. This shaker is therefore ideal for the development of cell cultures.Timer 1 s to 99 h 59 min or continuous operationExternal control unit with digital display for operation outside the incubatorScope of supply: Shaker incl. basic platform with rubber mat and external control unitDue to the ribbon cable, a feed-through in the incubator is not necessary.
For shaking round bottom, flat-bottom, pear-shaped, volumetric and erlenmeyer flasks etc. Minimum volume 25 ml.Capacity: Number of fixing clips (volume held) 110 x AS 2.1 (25 ml), 55 x AS 2.2 (50 ml), 35 x AS 2.3 (100 ml), 16 x AS 2.4 (250 ml), 12 x AS 2.5 (500 ml), 8 x AS 2.6 (1000 ml)Without spring clips.
Powerful shaker with a small footprint.LED display for speed and runtimeTimer up to 99 h 59 min or continuous operationScope of supply: basic device incl. basic platform and rubber mat
Microprocessor controlled shaking platform providing smooth and quiet horizontal orbital motion for mixing in bottles, flasks and beakers.Continuous or timed operation (1 min to 96 h) with automatic switch-offReliable direct drive systemAutomatic load balancing systemThe five interchangeable accessory platforms enable a wide choice of vessels to be used, including bottles, flasks and beakers, dishes, boxes and petri-dishes