Pestles for dounce homogenizers for pregrinding

For capacity:	2 ml
Manufacturer Article Number:	885301-0002
Material:	Boro 3.3
UNSPSC:	41-10-17-02

Other customers also bought

DWK Life Sciences GmbH (Kimble)

Homogenisers DUALL®, with glass pestle

With conical and cylindrical area for effective tissue for grinding and also for homogenising. Especially suitable for cellular tissue such as muscle, heart and lungs. The pestle is sufficiently stable to be motor driven. The space between the pestle and mortar is between 0.1mm to 0.15mm. Spare components are available and are completely interchangeable.

From CHF 283.00*

DWK Life Sciences GmbH (Kimble)

Homogenisers DUALL®, with PTFE pestle

With conical and cylindrical area for effective tissue for homogenising. The PTFE pestle is ideal for soft tissue such as brain or liver. The pestle is suitable for motor drive. The space between the pestle and mortar is between 0.1mm to 0.15mm. Spare components are available and are completely interchangeable.

From CHF 234.00*

Similar products

LLG-Micropestles, stainless steel

Polished stainless steel, micropestles. Precisely fitted for Eppendorf Safe-Lock Tubes™, manufactured in one-piece, smooth handle sections, can be disinfected easily. Minimum homogenate displacement due to tapered piston.For Reaction tubes:For homogenisation of cells, tissues or foodstuffs / feed samples.For tubes with 0.5 ml, 1.5 ml, and 2.0 mlCan be cooled down to -196 °CSterilisable in an autoclave or dry heat at 200 °CSuitable for PCR applicationsAlternative to single-use plastic pestlesPerfectly suitable for Eppendorf Safe-Lock Tubes

From CHF 49.90*

Accessories for micro pestles

From CHF 16.90*

Disposable pellet pestles, PP

Autoclavable. Suitable for battery-operated drive motor.

From CHF 158.00*

Disposable pellet pestles, PP, with reaction tube

Autoclavable. Suitable for battery-operated drive motor.

From CHF 192.00*

Dounce homogenizers

Glass. Suitable if the nuclei are to be maintained after homogenising.Two pestles are supplied:For pre-grindingFor fine grindingSpare components are available and are completely interchangeable.

From CHF 233.00*

Homogenisers, Dounce, glass

For fine particle size reductions without damage to cell nuclei. Supplied with interchangeable pestles ground and polished to large' and small' clearances for use in the same tube. Includes 2 larges pestle used for sample preparation and 2 tight pestles for final homogenate.

From CHF 465.00*

Glass mortar for dounce homogenizers

Suitable if the nuclei are to be maintained after homogenising.

From CHF 100.00*

Homogenisers, Duo-Form, Borosilicate glass 3.3

The pestles are conicaly shaped at the tip and cylindrically shaped in the upper part. This combination gives two separate areas, one for initial grinding and a second for final homogenisation.

From CHF 187.00*

Tissue Grinders System

For safety grinding of any cells by minimal temperature rising. Closed System (CS) for minimizing the risk of personal contact with aerosols and sample overflow while grinding. Optimal contact of grinder and conical sample tube (15 or 50ml) to grind each cell in the best way.Each unit is gamma sterilized and comes with a fully assembled pestle , conical sample tube (PP), solid top cap (HDPE) and label.Type CS1: Tip from glass-filled PP (30%/70%) for standard grindingType CS2: Vitrified tip (cast silica) for harder grinding

From CHF 251.00*

Potter-elvehjem homogenisers, Borosilicate glass

Potter-elvehjem homogenisers are designed to work with soft tissuePrecision Bore Borosilicate glass mortars with a range from 5.0 to 55ml capacityPTFE PestleStandard stainless steel rod for use with an electric motorOptional stainless steel handle for manual grindingAll parts are fully autoclavableGrinding Clearance Pestle and Mortar: 0.076 to 0.126mm

From CHF 147.00*

Pestles for dounce homogenizers, for pre-grinding