Syringe filters

Cytiva Europe GmbH

Syringe filters Puradisc™ FP30, CA

Syringe filters are suitable for rapid sample filtration and are used in a variety of applications, such as capillary electrophoresis, protein filtration, and UV spectroscopy sample preparation. With female Luer lock inlet.For the ready-to-use filter units, only virgin raw material is used. This ensures that there is no interaction with the sample to be filtered, provided that the units are used properly. The filter units are intended for laboratory use only.Note: If syringes with a volume <10 ml are used, a pressure could be created which exceeds the max. operating pressure (700 kPa/7 bar) of the filter unit.Hydrophilic membrane made of cellulose acetate (CA). Very low protein binding capacity.Housing made of PCOutlet male Luer coneAutoclavable at 121 °C

From CHF 178.00*

B. Braun Deutschland

Mini-Spike®

Vented dispensing pin with swabable needle-free access valve for injections and withdrawals of non-toxic fluids . Protection against the risk of chemical contamination.Mini-Spike® ChemoWith integrated 0.2 µm ventilation filterWith integrated 5 µm particle filterWith snap capMini-Spike® Chemo Vpossesses an integrated two way valve which protects against free-flow when the system is turned upside down.Mini-Spike® Chemo with micro tipoffers a thinner spike to perforate smaller vials to prevent small rubber stoppers from being pushed into the vial.Mini-Spike® 2Vented dispensing pin with swabable needle-free access valve for injections and withdrawals of non-toxic fluids from containersProtection against the risk of chemical contaminationIntegrated air vent making over-pressure release techniques unnecessary

From CHF 1.60*

Sartorius Lab Instruments

Syringe filter Minisart® SRP, PTFE

Housing PP. With a chemical-resistant, hydrophobic PTFE membrane for high purification of solvents or aggressive liquids in HPLC or GC analysis. Low adsorption.

From CHF 109.00*

LLG Labware

LLG-Syringe filters SPHEROS, Nylon

Cost-effective syringe filters for filtration of a broad variety of solvents, as well as aqueous, or inorganic solutions. These syringe filters cover most applications in HPLC, pharmaceutical, environmental, biotechnology, and food and beverage testing laboratories.Robust polypropylene housingMultifunctional syringe filters with female Luer-Lock inlet and male Luer-Slip outletSuitable for all syringes with Luer connectionHydrophilic membrane for filtration of aqueous, organic, and medium polar solutionsVery good chemical resistance to esters, alkaline solutions, and alcohols

From CHF 59.00*

Tip

LLG Labware

LLG-Syringe filters SPHEROS, cellulose acetate

Cost-effective syringe filters for filtration of a broad variety of solvents, as well as aqueous, or inorganic solutions. These syringe filters cover most applications in HPLC, pharmaceutical, environmental, biotechnology, and food and beverage testing laboratories.Robust polypropylene housingMultifunctional syringe filters with female Luer-Lock inlet and male Luer-Slip outletSuitable for all syringes with Luer connectionHydrophilic membrane for filtration of aqueous liquidsLow protein binding capacityEspecially suitable for biological macromolecules, water soluble oligomers, and polymersSterile filters in individual hard blister packaging and dispenser box.For research and development only.

From CHF 59.00*

Macherey-Nagel GmbH & Co. KG

Syringe filter CHROMAFIL®, Polytetrafluoroethylene (PTFE)

The syringe filters are used for filtration of suspended matter from liquid samples and are certified for HPLC. Standard CHROMAFIL syringe filters are color coded. CHROMAFIL Xtra syringe filters are labeled for method validation and certification. All CHROMAFIL syringe filters are autoclavable (121 °C and 1.1 bar for 30 min).A hydrophobic membrane. Ideal for filtration of non-polar liquids and gases. It is very resistant to various solvents as well as acids and bases. By flushing with alcohol, followed by water, the original hydrophobic membrane can be made more hydrophilic.

From CHF 145.60*

Thermo Elect.LED GmbH (Nalge)

Syringe filters, non sterile

Applications: Prefiltration and clarification of highly viscous solutions and the removal of large particles from suspensions. Use as a prefilter, with glass fiber membrane 25 mm housing diameter.

From CHF 185.00*

LLG Labware

LLG-Syringe filters NY, Nylon/Polyamide

LLG offers a line of syringe filters especially designed to provide efficient filtration of a broad variety of fluids, solvents, aqueous or inorganic solutions. Our syringe filters cover most applications in HPLC, pharmaceutical, environmental, biotechnology, as well as food and beverage testing laboratories.Housing injected in polypropylene and MABSSuperior pressure stability of the housingsSuitable for all syringes with Luer connectionRather hydrophilic membrane, optimal for filtration of aqueous and organic/aqueous medium polar liquids.Excellent chemical compatibility with esters, bases, and alcohols. With Luer-Lock input and Luer-Slip output. Sterile products in individual hard blister packaging.For research and development only.

From CHF 85.50*

Sartorius Lab Instruments

Syringe filter Minisart® NML Plus, GF+SFCA / GF

The only difference between the Sartorius Minisart® NML Plus (Glass-fibre / Cellulose acetate) and the standard Minisart® NML is an additional glass fibre pre-filter which enables a greater filtration volume for highly particle-laden liquids. Sartorius Minisart®-GF (Glass-fibre, 0.7 µm² particle retention) contains a single, binding agent-free, glass fibre pre-filter for ultrafiltration. With a support achievement of 99 % for 40 µm spherical particles.

From CHF 106.00*

LLG Labware

LLG-Syringe filters SPHEROS, PES

Cost-effective syringe filters for filtration of a broad variety of solvents, as well as aqueous, or inorganic solutions. These syringe filters cover most applications in HPLC, pharmaceutical, environmental, biotechnology, and food and beverage testing laboratories.Robust polypropylene housingMultifunctional syringe filters with female Luer-Lock inlet and male Luer-Slip outletSuitable for all syringes with Luer connectionHydrophilic membrane for aqueous and polar organic solutions with low protein binding capacityEspecially suitable for sterile filtration of solutions and media in cell culture, as well as for ion chromatography and organic acidsSterile filters individually packed in a hard blister package and dispenser box.For research and development only.

From CHF 53.70*

Sartorius Lab Instruments

Syringe filter Minisart® RC

Housing PP. Regenerated cellulose (RC). Ready-to-use units with a hydrophilic, solvent-resistant membrane made of regenerated cellulose, making sample preparation quick and easy. Suitable for aqueous/organic solutions.

From CHF 109.00*

Millipore GmbH

Syringe filters Millex

Syringe filters for filtration of aqueous solutions, organic solvents and gases, with Luer-Lock inlet and Luer-Slip outlet.

From CHF 340.00*

Sartorius Lab Instruments

Syringe filter Minisart® NML, SFAC

Housing MBS. SFCA / CA (Surfactant-free Cellulose Acetate) membrane. For sterile, particle free, ultrapure filtration of small volumes of liquid up to approx. 100 ml. Colour coded and printed for easy membrane and pore size identification. With hydrophilic cellulose acetate membrane for minimum adsorption. Ready-to-use. With female luer-lock inlet, male luer slip outlet.

From CHF 115.00*

Cytiva Europe GmbH

Syringe filters Puradisc™, PTFE

Syringe filters are suitable for rapid sample filtration and are used in a variety of applications, such as capillary electrophoresis, protein filtration, and UV spectroscopy sample preparation. With female Luer lock inlet.For the ready-to-use filter units, only virgin raw material is used. This ensures that there is no interaction with the sample to be filtered, provided that the units are used properly. The filter units are intended for laboratory use only.Note: If syringes with a volume <10 ml are used, a pressure could be created which exceeds the max. operating pressure (700 kPa/7 bar) of the filter unit.Hydrophobic membrane. Ideal for filtration of non-polar liquids and gases.Housing made of PPOutlet male Luer coneAutoclavable at 121 °C

From CHF 229.00*

Macherey-Nagel GmbH & Co. KG

Syringe filter CHROMAFIL®, Polyester (PET)

Hydrophilic membrane for polar as well as non-polar solvents. The HPLC filter, especially suited for mixtures of water and organic solvents; for TOC/DOC determination; not cytotoxic, does not inhibit the growth of microorganisms and higher cells. Polyester filter with integrated glass fibre prefilter (GF/PET): recommended for solutions with a high load of particulate matter or for highly viscous solutions.

From CHF 145.60*

Cytiva Europe GmbH

Syringe filters GD/XP, nylon

Disposable syringe filters for use with samples requiring inorganic ion analysis as the extractable ion content is minimized. The syringe filters contain 3 filtration layers that significantly reduce blockage and increase volume throughput. Layer 1 is a 20 µm polypropylene filter, layer 2 is a 5 µm polypropylene filter, and layer 3 is the membrane filter which filters down to 45 µm.Housing made of PPFemale Luer-Lock inletMale Luer outletAutoclavable at 121 °CHydrophilic membrane made of nylon.

From CHF 800.00*

Cytiva Europe GmbH

Syringe filters GD/X® RC

Whatman GD/X syringe filters are the perfect solution for samples with high viscosity or samples that contain particles. Four filter layers decrease clogging and therefore filter exchange during processing is avoided. These filters allow 3 to 7 times higher throughput than traditional types.Whatman GD/X syringe filters are the perfect solution for samples with high viscosity or samples that contain particles. Four filter layers decrease clogging and therefore filter exchange during processing is avoided. These filters allow 3 to 7 times higher throughput than traditional types.

From CHF 820.00*

Thermo Elect.LED GmbH (Nalge)

Syringe Filter Nalgene™ PES

For sterile filtration and purification of aqueous cell culture media

From CHF 440.60*

LLG Labware

LLG-Syringe filters SPHEROS, PTFE

Cost-effective syringe filters for filtration of a broad variety of solvents, as well as aqueous, or inorganic solutions. These syringe filters cover most applications in HPLC, pharmaceutical, environmental, biotechnology, and food and beverage testing laboratories.Robust polypropylene housingMultifunctional syringe filters with female Luer-Lock inlet and male Luer-Slip outletSuitable for all syringes with Luer connectionHydrophobic membrane for filtration of non-polar liquids and gasesVery good chemical resistance to all kinds of solvents and alkaline solutions

From CHF 59.00*

Millipore GmbH

Filter units Millex, PTFE

Hydrophobic membrane for clarifying organic solutions, sterilisation of gases and venting containers.Housing made of PPAutoclavableFiltration area:19.6 cm²Max. inlet pressure:4.1 bar

From CHF 178.00*

LLG Labware

LLG-Syringe filters PTFE, Polytetrafluorethylene

LLG offers a line of syringe filters especially designed to provide efficient filtration of a broad variety of fluids, solvents, aqueous or inorganic solutions. Our syringe filters cover most applications in HPLC, pharmaceutical, environmental, biotechnology, as well as food and beverage testing laboratories.Housing injected in polypropylene and MABSSuperior pressure stability of the housingsSuitable for all syringes with Luer connectionHydrophobic membrane. Ideal for filtration of non-polar liquids and gases.It is very resistant to various solvents, as well as acids, and bases. With Luer-Lock input and Luer-Slip output.

From CHF 723.20*

Macherey-Nagel GmbH & Co. KG

Syringe filter CHROMAFIL®, Cellulose acetate (CA)

Hydrophilic membrane for filtration of water-soluble oligomers and polymers, especially suited for biological macromolecules. Very high shape stability in aqueous solutions extremely low binding capacity for proteins (21µg/ 25mm filter).

From CHF 145.60*

Cytiva Europe GmbH

Syringe filters Puradisc™, PP

Syringe filters are suitable for rapid sample filtration and are used in a variety of applications, such as capillary electrophoresis, protein filtration, and UV spectroscopy sample preparation. With female Luer lock inlet.For the ready-to-use filter units, only virgin raw material is used. This ensures that there is no interaction with the sample to be filtered, provided that the units are used properly. The filter units are intended for laboratory use only.Note: If syringes with a volume <10 ml are used, a pressure could be created which exceeds the max. operating pressure (700 kPa/7 bar) of the filter unit.Suitable for HPLC sample filtration (water-based) and aggressive water solutions such as acids and alkalis.Housing made of PPOutlet male Luer coneAutoclavable at 121 °C

From CHF 265.00*

Cytiva Europe GmbH

Disposable Filtration Capsules, Hepa-Cap

Laminated hydrophobic glass microfibre filter. Ideal for the sterilisation of large volumes of air at low pressure. Available in two sizes, depending on the volume of air or gas to be filtered. Non-sterile, separately available. Autoclavable.Maximum operating pressure 4.1 barWide range of chemical compatibilityHigh loading capacity and high through-put filtration media99.97% of particles of 0.3µm or larger are retainedAutoclavable at up to 132 °C for one hourConnectors: stepped barb (SB) and female national pipe thread (FNPT)

From CHF 95.00*

LLG Labware

LLG-Syringe filters SPHEROS, PVDF

Cost-effective syringe filters for filtration of a broad variety of solvents, as well as aqueous, or inorganic solutions. These syringe filters cover most applications in HPLC, pharmaceutical, environmental, biotechnology, and food and beverage testing laboratories.Robust polypropylene housingMultifunctional syringe filters with female Luer-Lock inlet and male Luer-Slip outletSuitable for all syringes with Luer connectionHydrophilic membrane for aqueous polar and light non-polar solutionsVery low protein bindingSuitable for high flow ratesIdeal for use with biological macromolecules, water-soluble oligomers and polymersSterile filters in individual hard blister packaging and dispenser box.For research and development only.

From CHF 40.25*

LLG Labware

LLG-Syringe filters GF, Glass fibre

LLG offers a line of syringe filters especially designed to provide efficient filtration of a broad variety of fluids, solvents, aqueous or inorganic solutions. Our syringe filters cover most applications in HPLC, pharmaceutical, environmental, biotechnology, as well as food and beverage testing laboratories.Housing injected in polypropylene and MABSSuperior pressure stability of the housingsSuitable for all syringes with Luer connectionHydrophilic membrane suitable for pre-filtration. They can be used for solutions with high particulate loads or for highly viscous solutions (e.g. soil samples, fermentation broths) either alone or in combination with other filters. With Luer-Lock input and Luer-Slip output.

From CHF 748.70*

Cytiva Europe GmbH

Syringe filters GD/X® CA

From CHF 325.00*

LLG Labware

LLG-Syringe filters CA, Cellulose acetate

LLG offers a line of syringe filters especially designed to provide efficient filtration of a broad variety of fluids, solvents, aqueous or inorganic solutions. Our syringe filters cover most applications in HPLC, pharmaceutical, environmental, biotechnology, as well as food and beverage testing laboratories.Housing injected in polypropylene and MABSSuperior pressure stability of the housingsSuitable for all syringes with Luer connectionHydrophilic membrane for filtration of aqueous solutions.This membrane features excellent shape stability in aqueous solutions and is characterised by a very low binding capacity for proteins (21 µg per 25 mm filter). Particularly suitable for biological macromolecules, water-soluble oligomers and polymers.Sterile products in individual hard blister packaging.For research and development only.

From CHF 71.80*

LLG Labware

LLG-Syringe filters RC, Regenerated cellulose

LLG offers a line of syringe filters especially designed to provide efficient filtration of a broad variety of fluids, solvents, aqueous or inorganic solutions. Our syringe filters cover most applications in HPLC, pharmaceutical, environmental, biotechnology, as well as food and beverage testing laboratories.Housing injected in polypropylene and MABSSuperior pressure stability of the housingsSuitable for all syringes with Luer connectionHydrophilic membrane features very low adsorption. It is recommended for filtration of aqueous and organic/aqueous liquids. For filtration of polar and medium polar liquids. With Luer-Lock input and Luer-Slip output.

From CHF 707.90*

Maschine, Sprach, Achse, Rad, Maschine, Sprach, Achse, Rad, Maschine, Sprach, Achse, Rad, Maschine, Sprach, Achse, Rad

Macherey-Nagel GmbH & Co. KG

Syringe filter CHROMAFIL®, regenerated Cellulose with glass fibre prefilter (GF/RC)

Hydrophilic membrane for filtration of aqueous and organic/aqueous liquids, i.e. polar and medium polar sample solutions, for solutions with a high load of particulate matter or for highly viscous solutions.

From CHF 179.70*

Maschine, Rad, Maschine, Rad, Maschine, Rad, Maschine, Rad, Maschine, Rad, Maschine, Rad

Macherey-Nagel GmbH & Co. KG

Syringe filter CHROMAFIL®, Glass-fibre (GF)

Inert Filter, nominal pore size 1µm, allows higher flow rates than smaller pore filters. For solutions with high loads of particulate matter or for highly viscous solutions (e. g. soil samples, fermentation broths) as prefilters for other CHROMAFIL® filters, they prevent plugging of the membrane.

From CHF 145.60*

Rauchrohr, Rauchrohr, Rauchrohr, Rauchrohr, Rauchrohr, Rauchrohr

Macherey-Nagel GmbH & Co. KG

Syringe filter CHROMAFIL®, Cellulose mixed ester (MV)

Hydrophilic membrane. This membrane is recommended for all filtrations of aqueous or polar organic samples.

From CHF 221.50*

Macherey-Nagel GmbH & Co. KG

Syringe filter CHROMAFIL®, regenerated Cellulose (RC)

The syringe filters are used for filtration of suspended matter from liquid samples and are certified for HPLC. Standard CHROMAFIL syringe filters are color coded. CHROMAFIL Xtra syringe filters are labeled for method validation and certification. All CHROMAFIL syringe filters are autoclavable (121 °C and 1.1 bar for 30 min).Hydrophilic membrane with very low adsorption for aqueous and organic/aqueous liquids i.e. polar and medium polar sample solutions. Binding capacity for proteins 84µg/25mm filter.

From CHF 221.50*

La-Pha-Pack GmbH

Syringe Filter for HPLC

For small sample volumes. With Luer Lock inlet and Luer outlet. The type of membrane is indicated on the syringe filter.17 mm filter diameterColor codedDead volume < 0,29 ml

From CHF 147.40*

Cytiva Europe GmbH

Syringe filters Puradisc™, Nylon

Syringe filters are suitable for rapid sample filtration and are used in a variety of applications, such as capillary electrophoresis, protein filtration, and UV spectroscopy sample preparation. With female Luer lock inlet.For the ready-to-use filter units, only virgin raw material is used. This ensures that there is no interaction with the sample to be filtered, provided that the units are used properly. The filter units are intended for laboratory use only.Note: If syringes with a volume <10 ml are used, a pressure could be created which exceeds the max. operating pressure (700 kPa/7 bar) of the filter unit.Hydrophilic membrane. It is recommended for filtration of aqueous and organic/aqueous medium polar liquids.Housing made of PPOutlet male Luer coneAutoclavable at 121 °C

From CHF 265.00*

Sartorius Lab Instruments

Syringe filters, Minisart® High-Flow, PES

Housing MBS. Minisart® High Flow PES (Polyethersulfone) syringe filters for sterile filtration, particle removal and ultra-cleaning. Covers a wide pH range. These independent ready-to-use syringe filters with PES membrane filter feature excellent flow speed and high filterable volume. The Minisart® High Flow is a syringe filter for rapid volume sterilisation with maximum user convenience. Ready-to-use units, which offer flow rates at low inlet pressures, allow for a correspondingly rapid sterile filtration.x = sterilization by gamma irradiation

From CHF 189.00*

Filter products