Deionized and UV irradiated. Acc to DIN 43530 / EN 385. In plastic canister.SpecificationspH value: Conductivity:7,0 5 µS/cmHardness:0,02 mmol/lChlorine content:2 mg/l

Filter for pressure-resistant behropur® mixed-bed ion exchangers. Transparent casing. Once added to the ion exchanger, it completely retains even the finest particles and protects your high-quality equipment. Due to the transparent casing of the FG 130, you can see the state of the filter insert at any time and at a glance.Depending on the requirements, you can use a universal filter (5µ) or a carbon filter (20µ). Downstream filters may only be used on pressure-resistant behropur® ion exchangers. Pressure-free exchangers are destroyed by the counter pressure. It could also subsequently result in expensive damage.FG 130 behropur® filter housing for filter inserts with a length of 5". Transparent casing made of PP. Connections ¾", maximum operating pressure 8bar, max. temp. 50°CFE 130 behropur® filter insert, PP, 5µ, length 5", max. pressure 6bar, max. temp. 80°CAF 130 behropur® filter insert, carbon, 20µ, length 5", max. pressure 6bar, max. temp. 50°C

* Interval of exchanges depends on raw water quality and throughput

The purification pack, for use with the Direct-Q® 3 system, contains two cartridges for producing ultra-pure water from tap water.Cartridge 1: Pre-treatment (activated carbon and depth filter) and reverse osmosis membrane (RO)Cartridge 2: Ultrapure grade mixed bed ion exchange resin

For ultra pure water type I.Ultra pure water of the highest quality for analytical and life science applications in the laboratory. With the standard control and monitoring unit OptiFilltouch, laboratory vessels can be filled conveniently and precisely. The recirculation function prevents the growth of biofilms.Compact designCan be used with deionised waterDispenser pivotable up to 170°Digital control and monitoring unit OptiFilltouch with colour touch displayReal-time TOC monitoringAdjustable limit values for conductivity and TOCInnovative monitoring and display of cartridge capacityWithdrawal volume individually adjustablePermanent data storage of all quality parametersPassword access and error memory3 languages selectable: DE, EN, FRRS232 and USB interfaceLeakage sensorIntegrated pressure reducerAutomatic voltage adjustmentCan be operated with laboratory glovesApplications:OmniaPure xstouch UV-TOC: Ultra trace analysis, ICP-MS, HPLC, TOC analysisOmniaPure xstouch UV-TOC/UF: Molecular and microbiology, cell culture mediaScope of supply: Ultra pure water system, pre-treatment cartridge, ultra pure water cartridge, sterile filter capsule (0.2 µm)Ultra pure water output:Up to 2 l/minDispensing volume:0.05 ... 25 lResistivity at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria (with filter):0.01 CFU/mlParticles (with filter):1/mlRNase (with UF module):1 pg/mlDNase (with UF module):5 pg/mlProteases (with UF module):0.15 µg/lFeed water conductivity at 25 °C:100 µS/cmDimensions incl. OptiFilltouch dispenser (W x D x H):240 x 435 x 530 mmWeight incl. OptiFilltouch dispenser:14 kgPower supply:90 ... 240 V, 50 ... 60 Hz

With high-performance resinWith foam insertSecure grip due to flutingSuitable for conductivity meters with 4 and 8 LEDs

For the separation of particles and microorganisms from pure water. The filter can be installed at the tapping points of water treatment systems.High water flowHydrophilIncl. quality certificateHousing Material:SANInlet connection:1/4"Outlet connection:8 mm hose olive with protective bell

For ultra pure water type I.Ultra pure water of the highest quality for analytical and life science applications in the laboratory. With the standard control and monitoring unit OptiFilltouch, laboratory vessels can be filled conveniently and precisely. The recirculation function prevents the growth of biofilms.Compact designCan be used with deionised waterDispenser pivotable up to 170°Digital control and monitoring unit OptiFilltouch with colour touch displayReal-time TOC monitoringAdjustable limit values for conductivity and TOCInnovative monitoring and display of cartridge capacityWithdrawal volume individually adjustablePermanent data storage of all quality parametersPassword access and error memory3 languages selectable: DE, EN, FRRS232 and USB interfaceLeakage sensorIntegrated pressure reducerAutomatic voltage adjustmentCan be operated with laboratory glovesApplications:OmniaPure xstouch UV-TOC: Ultra trace analysis, ICP-MS, HPLC, TOC analysisOmniaPure xstouch UV-TOC/UF: Molecular and microbiology, cell culture mediaUltra pure water system OmniaPure xstouch in the under-bench version can be installed under a laboratory bench to save space. The external dispenser and monitoring unit OptiFilltouch is positioned on top of the bench.Scope of supply: Ultra pure water system, pre-treatment cartridge, ultra pure water cartridge, sterile filter capsule (0.2 µm)Ultra pure water output:Up to 2 l/minDispensing volume:0.05 ... 25 lResistivity at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria (with filter):0.01 CFU/mlParticles (with filter):1/mlRNase (with UF module):1 pg/mlDNase (with UF module):5 pg/mlProteases (with UF module):0.15 µg/lFeed water conductivity at 25 °C:100 µS/cmDimensions device (W x D x H):240 x 310 x 415 mmDimensions bench dispenser (W x D x H):150 x 450 x 580 mmWeight device:13 kgWeight bench dispenser:8 kgPower supply:90 ... 240 V, 50 ... 60 Hz

The non-pressurised cartridges, which are suitable for a daily requirement up to 15 litres, are simply replaced after a prolonged period of service. A filter system prevents any resin from escaping.Scope of delivery DS 450: incl. analogue conductivity meter, set of hoses and wall mount.Scope of delivery DS 750: incl. analogue conductivity meter and set of hoses.Specifications:Pure water quality:0,1 ... 20 µS / cmMax. water temperature:30 °CConnection:R ¾"Power supply:230 V / 50 ... 60 Hz* At 10° total dissolved solids

Standard cartridge made of V4A stainless steel for general purpose application: To supply laboratory glassware washers, for general laboratory maintenance and for small industrial consumers. For subsequent demineralization of reverse osmosis systems.pressure resistant to 10 bar / 8 bar at E40dAoptimum exploitation of the ion exchanger capacity due to absolute uniform water distribution in the unitflow rates up to 700 litres/hourthe unique behropur® jet nozzle system distributes the raw water over the entire resin bed. This ensures an optimum exchange capacity and qualitycan be connected to the raw water network directly and without a pressure reducerresistant to alternating pressurehard rubber collars vulcanized to the base and top of the unit offer effective protectionconvenient transport thanks to the handles embedded into the top part of the unitconductivity is controlled directly on the unit (installed measuring equipment) or with remote location meterAlso available with shut-off when the limit value is reached and limit controlSpecificationsE 28 / E 40 dExchange capacity* at 10°dH2800 litres / 4000 litresFlow max. litres/hour500 / 700Diameter in cm 24 / 24Height incl. LF in cm74 / 84Height of cartridge only in cm60 / 70* Limit value 20 µS/cm

Dechlorite Filter 2904For all GFL water stills. Eliminates chlorine particles in the mains water, added by the local water suppliers. Complete with connections for 1/2 inch, (12.7mm i.d.) pressure tubing, including first filter charge. The charge should be changed every six months. Tubing for the water inlet and outlet are available as accessoriesPhosphate Cartridge 2906For all GFL water stills. Prevents limescale formation in the condenser by phosphatising the supply water. Can be used from 4-15°dH (German hardness). Complete with connections for ½ inch (12.7mm i.d.) pressure tubing, including first filling. The filling should be replaced according to consumption. Tubing for the water inlet and outlet are available as accessories.Separate Water Supply 2901 / 2902 / 2903To feed the evaporator with softened or desalinated water (pressure >1 bar) and the cooling coil (pressure >3 bar) with phosphate-treated, or standard mains water. Efficiency of the still is reduced by approx. 10 to 15%. 2901 for Water Stills 2002 to 2012, 2902 for Glass Water Stills, 2903 for Water Stills 2102 to 2108. Tubing for the water inlet and outlet are available as accessories. Installation must be performed at the factory.Level Control Switch 2908 / 2910To control the water level in external reservoirs for Water Stills. To switch off power and water when the external reservoir is full (not included). 2908 for Glass Water Stills 2202 to 2208, 2302 and 2304. 2910 for Water Stills 2004 to 2012 and 2102 to 2108. Installation must be performed at the factory. When using an external reservoir with level switch 2910, the internal reservoir is disabled.* Installation must be performed at the factory

High quality stainless steel ion exchanger (V4A) pressure resistant up to 10 bar. High quality and longevity, parts in stainless steel in contact with medium. Optimised water distribution.Without conductivity meter. Please order separately.

Pack including right and left DI cartridge.

The Thermo Scientific™ Aquanex™ is a system that produces ultrapure water (ASTM Type I) and pure water (ASTM Type II) from tap water for analytical and life science applications. Consumables can be replaced quickly and easily by removing the magnetic front panel, new cartridges are automatically recognized by the device. The device has 3 operating modes (water saving mode, pack saving mode, dynamic mode) that reduce water consumption or maximize the life of consumables.Ergonomic dispenser with touchscreen displayQuick connect fixtures facilitate installationVolumetric and manual dispensing possibleTwo-point calibration for improved accuracy in volumetric dispensingAdjustment of water flow at low dispensing volumes reduces splashingSecure log-in functionSeamless event logging, monitoring, and reportingExport of event logs via USB interface in CSV or PDF formatAutomatic leak detection and system shutoffScope of supply: Pure and ultrapure water system, integrated 10 l tank, Aquanex™ Touch Smart dispenser with stand, DI cartridge set, UV/UF module, final filter (0.1 µm), pretreatment system Barnstead™Ultrapure water ASTM Type I:Flow rate:≥2.0 l/minResistance at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria:0.001 CFU/mlPure water ASTM Type II:Permeate flow rate:16 ± 20 % l/hrResistance at 25 °C:1 ... 10 MΩ x cmConductivity at 25 °C:0.1 ... 1.0 µS/cm

The Thermo Scientific™ Aquanex™ is a system that produces ultrapure water (ASTM Type I) and pure water (ASTM Type II) from tap water for analytical and life science applications. Consumables can be replaced quickly and easily by removing the magnetic front panel, new cartridges are automatically recognized by the device. The device has 3 operating modes (water saving mode, pack saving mode, dynamic mode) that reduce water consumption or maximize the life of consumables.Ergonomic dispenser with touchscreen displayQuick connect fixtures facilitate installationVolumetric and manual dispensing possibleTwo-point calibration for improved accuracy in volumetric dispensingAdjustment of water flow at low dispensing volumes reduces splashingSecure log-in functionSeamless event logging, monitoring, and reportingExport of event logs via USB interface in CSV or PDF formatAutomatic leak detection and system shutoffScope of supply: Pure and ultrapure water system, integrated 10 l tank, Aquanex™ Touch Smart dispenser with stand, DI cartridge set, UV/UF module, final filter (0.1 µm)Ultrapure water ASTM Type I:Flow rate:≥2.0 l/minResistance at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria:0.001 CFU/mlPure water ASTM Type II:Permeate flow rate:16 ± 20 % l/hrResistance at 25 °C:1 ... 10 MΩ x cmConductivity at 25 °C:0.1 ... 1.0 µS/cm

The Thermo Scientific™ Aquanex™ is a system that produces ultrapure water (ASTM Type I) and pure water (ASTM Type II) from tap water for analytical and life science applications. Consumables can be replaced quickly and easily by removing the magnetic front panel, new cartridges are automatically recognized by the device. The device has 3 operating modes (water saving mode, pack saving mode, dynamic mode) that reduce water consumption or maximize the life of consumables.Ergonomic dispenser with touchscreen displayQuick connect fixtures facilitate installationVolumetric and manual dispensing possibleTwo-point calibration for improved accuracy in volumetric dispensingAdjustment of water flow at low dispensing volumes reduces splashingSecure log-in functionSeamless event logging, monitoring, and reportingExport of event logs via USB interface in CSV or PDF formatAutomatic leak detection and system shutoffScope of supply: Pure and ultrapure water system, external 30 l tank, Aquanex™ Touch Smart dispenser with stand, DI cartridge set, UV/UF module, final filter (0.1 µm), pretreatment system Barnstead™Ultrapure water ASTM Type I:Flow rate:≥1.5 l/minResistance at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria:0.001 CFU/mlPure water ASTM Type II:Permeate flow rate:16 ± 20 % l/hrResistance at 25 °C:1 ... 10 MΩ x cmConductivity at 25 °C:0.1 ... 1.0 µS/cm

The Thermo Scientific™ Aquanex™ is a system that produces ultrapure water (ASTM Type I) and pure water (ASTM Type II) from tap water for analytical and life science applications. Consumables can be replaced quickly and easily by removing the magnetic front panel, new cartridges are automatically recognized by the device. The device has 3 operating modes (water saving mode, pack saving mode, dynamic mode) that reduce water consumption or maximize the life of consumables.Ergonomic dispenser with touchscreen displayQuick connect fixtures facilitate installationVolumetric and manual dispensing possibleTwo-point calibration for improved accuracy in volumetric dispensingAdjustment of water flow at low dispensing volumes reduces splashingSecure log-in functionSeamless event logging, monitoring, and reportingExport of event logs via USB interface in CSV or PDF formatAutomatic leak detection and system shutoffScope of supply: Pure and ultrapure water system, external 30 l tank, Aquanex™ Touch Smart dispenser with stand, DI cartridge set, UV/UF module, final filter (0.1 µm)Ultrapure water ASTM Type I:Flow rate:≥1.5 l/minResistance at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria:0.001 CFU/mlPure water ASTM Type II:Permeate flow rate:16 ± 20 % l/hrResistance at 25 °C:1 ... 10 MΩ x cmConductivity at 25 °C:0.1 ... 1.0 µS/cm

Pressure resistant stainless steel cartridge, specifically for laboratory applications, with a particularly high capacity and flow rates of up to 1000 litres an hour. The flow system ensures a fast and effective flow through the mixed-bed system with ion-exchange resins.Capacity at 10° total dissolved solidsSpecifications:Max. pressure:10 barPure water quality:0.1 ... 20 µS / cmMax. water temperature:30 °CConnection:R ¾"

For ultra pure water type I.Ultra pure water of the highest quality for analytical and life science applications in the laboratory. With the standard dispenser and monitoring unit OptiFillbasic, laboratory vessels can be filled conveniently and precisely. The recirculation function prevents the growth of biofilms.Compact designCan be used with deionised waterDispenser pivotable up to 170°Ergonomic, flexible dispenser and monitoring unit OptiFillbasic with graphic displayReal-time display of all operating and performance parametersSetting possibilities for conductivity in MΩ x cm or µS/cmPassword access2 languages selectable: DE, ENLeakage sensorIntegrated pressure reducerAutomatic voltage adjustmentApplications:OmniaPure xsbasic: AAS, IC, ICP, buffers and media preparationOmniaPure xsbasic UV: Ultra trace analysis, ICP-MS, HPLC, TOC analysisScope of supply: Ultra pure water system, pre-treatment cartridge, ultra pure water cartridge, sterile filter capsule (0.2 µm)Ultra pure water output:Up to 2 l/minResistivity at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria (with filter):0.01 CFU/mlParticles (with filter):1/mlFeed water conductivity at 25 °C:100 µS/cmDimensions (W x D x H):240 x 435 x 530 mmWeight:14 kgPower supply:90 ... 240 V, 50 ... 60 Hz

For ultra pure water type I.Ultra pure water of the highest quality for analytical and life science applications in the laboratory. With the standard control and monitoring unit OptiFilltouch, laboratory vessels can be filled conveniently and precisely. The recirculation function prevents the growth of biofilms.Compact designCan be used with deionised waterDispenser pivotable up to 170°Digital control and monitoring unit OptiFilltouch with colour touch displayReal-time TOC monitoringAdjustable limit values for conductivity and TOCInnovative monitoring and display of cartridge capacityWithdrawal volume individually adjustablePermanent data storage of all quality parametersPassword access and error memory3 languages selectable: DE, EN, FRRS232 and USB interfaceLeakage sensorIntegrated pressure reducerAutomatic voltage adjustmentCan be operated with laboratory glovesApplications:OmniaPure xstouch UV-TOC: Ultra trace analysis, ICP-MS, HPLC, TOC analysisOmniaPure xstouch UV-TOC/UF: Molecular and microbiology, cell culture mediaUltra pure water system OmniaPure xstouch in the under-bench version can be installed under a laboratory bench to save space. The external dispenser and monitoring unit OptiFilltouch is positioned on the wall.Scope of supply: Ultra pure water system, pre-treatment cartridge, ultra pure water cartridge, sterile filter capsule (0.2 µm)Ultra pure water output:Up to 2 l/minDispensing volume:0.05 ... 25 lResistivity at 25 °C:18.2 MΩ x cmConductivity at 25 °C:0.055 µS/cmBacteria (with filter):0.01 CFU/mlParticles (with filter):1/mlRNase (with UF module):1 pg/mlDNase (with UF module):5 pg/mlProteases (with UF module):0.15 µg/lFeed water conductivity at 25 °C:100 µS/cmDimensions device (W x D x H):240 x 310 x 415 mmDimensions wall dispenser (W x D x H):100 x 460 x 520 mmWeight device:13 kgWeight wall dispenser:2.4 kgPower supply:90 ... 240 V, 50 ... 60 Hz

The arium® mini is a compact ultrapure water series that is specially designed for Type 1 water requirements of about 10 liters per day. With the capacity to deliver ultrapure water at a rate of 1 L/min. and a width of only 28 cm (11 in.), this space-saving unit easily integrates into nearly any lab environment.For analytical and especially critical applications, such as HPLC/UHPLC, all arium® mini systems can also be equipped with an optional integrated UV lamp (185/254 nm). This ensures reliable production of ultrapure water that is virtually free of organic components.Typical applications are buffer and media preparation, histology, reagent preparation, ELISA, AAS, IC, photometry, SPE, GC-MS, HPLC/UHPLC and ICP-MS.Intuitive menu navigation via colour touch displayOptimized purity, due to closed systemNo need to use cleaning productsDelivers a flow rate of 1 litre per minuteVolume dispense from 50 mlSmall footprintThe arium® mini essential, can be connected directly to a centralized/ decentralized feed water supply (DI/RO/EDI). As this direct connection eliminates the need for storage of pretreated water, the system is independent of an internal storage option. The system produce directly ultrapure water from the water provided.

The arium® mini is a compact ultrapure water series that is specially designed for Type 1 water requirements of about 10 liters per day. With the capacity to deliver ultrapure water at a rate of 1 L/min. and a width of only 28 cm (11 in.), this space-saving unit easily integrates into nearly any lab environment.For analytical and especially critical applications, such as HPLC/UHPLC, all arium® mini systems can also be equipped with an optional integrated UV lamp (185/254 nm). This ensures reliable production of ultrapure water that is virtually free of organic components.Typical applications are buffer and media preparation, histology, reagent preparation, ELISA, AAS, IC, photometry, SPE, GC-MS, HPLC/UHPLC and ICP-MS.Intuitive menu navigation via colour touch displayOptimized purity, due to closed systemNo need to use cleaning productsDelivers a flow rate of 1 litre per minuteVolume dispense from 50 mlSmall footprintUltrapure Water arium® mini is an ultrapure water system with integrated bag tank technology. The 5-liter bags are made of multilayer and specialized film, conforming to biocompatibility standards. The pure water can be stored in the side integrated 5-litre bag until the production of type 1 pure water.The standard version of arium® mini is independent of a permanently installed water tap. Pretreated water is supplied from a container to the system via the integrated pump and is stored for further processing in the arium Bag. The water stored in this way then serves as feed water for the production of ultrapure water.

The systems are equipped with an electronic dispenser allowing precise and easy volume-controlled dispensing of your ultra-pure water, up to 2 l/min. Systems which include Ultrafiltration (Ultra Clear™ UV UF) deliver RNase-, DNase- and DNA-free water and they can produce ultra-pure water with endotoxin levels of < 0.001 EU/ml. A built-in automatic self-cleaning mechanism extends the life of the ultrafiltration module.The Ultra Clear™ TP ED TWF EDI ultrapure water systems can be connected directly to the drinking water network (Tap Water Feed) and are supplied with a 30 l or 60 l storage tank for type II water. The built-in reverse osmosis system has a recovery rate of > 30 % to conserve water. The continuous electrodeionisation (EDI) stage purifies RO product water down to a quality range of 0.055 µS/cm (18.2 MΩ-cm). EDI product water can be drawn directly from the integrated storage tank.7" Multi-color touch displayFor tap waterTOC monitoring (TM)User-guided disinfection modeEnergy saving modeWall mounting possibleModbus connectivityUSB, printer and SD card connectionScope of supply: ultrapure water system, 1 set of modules and filtersUltra pure water output:up to 2 l/minResistance:18.2 MΩ-cmBacteria: 0.1 KbE/mlParticle 0.2 µm/ml: 1* Tank dimensions

The systems are equipped with an electronic dispenser allowing precise and easy volume-controlled dispensing of your ultra-pure water, up to 2 l/min. Systems which include Ultrafiltration (Ultra Clear™ UV UF) deliver RNase-, DNase- and DNA-free water and they can produce ultra-pure water with endotoxin levels of < 0.001 EU/ml. A built-in automatic self-cleaning mechanism extends the life of the ultrafiltration module.The Ultra Clear™ TP ED TWF ultrapure water systems can be connected directly to the drinking water network (Tap Water Feed) and are supplied with a 30 l or 60 l storage tank for type II water. The built-in reverse osmosis system has a recovery rate of > 30 % to conserve water. An ion exchange module (DI) provides water with < 2 µS/cm from the tank.7" Multi-color touch displayFor tap waterTOC monitoring (TM)User-guided disinfection modeEnergy saving modeWall mounting possibleModbus connectivityUSB, printer and SD card connectionScope of supply: ultrapure water system, 1 set of modules and filtersUltra pure water output:up to 2 l/minResistance:18.2 MΩ-cmBacteria: 0,1 KbE/mlParticle 0,2 µm/ml: 1* Tank dimensions

The systems are equipped with an electronic dispenser allowing precise and easy volume-controlled dispensing of your ultra-pure water, up to 2 l/min. Systems which include Ultrafiltration (Ultra Clear™ UV UF) deliver RNase-, DNase- and DNA-free water and they can produce ultra-pure water with endotoxin levels of < 0.001 EU/ml. A built-in automatic self-cleaning mechanism extends the life of the ultrafiltration module.The Ultra Clear™ TP ED Polisher models are designed for deionised water feed at conductivity < 20 μS/cm and deliver up to 2 l/min ultrapure water.7" Multi-color touch displayFor deionised water with max. 20 µS/cmTOC oxidation and monitoring (TM)User-guided, integrated disinfection modeTemperature compensation can be switched offEnergy saving modeWall mounting possibleModbus connectivityUSB, printer and SD card connectionScope of supply: ultrapure water system, 1 set of modules and filtersUltra pure water output:up to 2 l/minResistance:18.2 MΩ-cmBacteria: 0,1 KbE/mlParticle 0,2 µm/ml: 1