For continuous operation. Electric hotplates with thermostatic temperature control and stepless performance control. With aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Stainless steel housing, with painted central section. Height-adjustable feet. Mains cable approximately 1.7 m.

Housing made of stainless steel, brushed and polished, in a unique Softline Design, Schott Ceran® cooking surface. Adjustable power control with power-saving or power control in 9 steps (TC = Touch Control). Two-circle HiLight technique, thus extra large heating zone (dia. 210 mm) can be activated. Thermal shutdown and automatic cooking system. Residual heat indicator and warning light. Temperature range (empty): 0 to approx. 460°C. Power supply 230 V.

Made of glass ceramic which offers excellent chemical resistance.Fixed safety circuit of 550 °CHot Top indicator: Hot surface warning to prevent burnsExact temperature setting via digital display (LED)Digital error code displayRaised control panel for protection against spilt liquidsAdapter according to DIN 12878 for connecting a contact thermometer, e.g. ETS-D5, enables precise temperature control

For continuous operation. Provide extremely accurate, uniform temperatures, even in plate corners and on edges. Polished anodised aluminium heating surface. Microprocessor-controlled temperature controller with temperature setting up to 99.9 in 0.1 °C steps, over 99.9 in 1 °C steps. Actual temperature displayed continuously. With separate power controller for performance adjustment to the heating requirements from 10 to 100 %. Built-in relay allows direct connection of electronic contact thermometers.

For continuous operation. Electric hotplates with thermostatic temperature control and stepless performance control. With aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Stainless steel housing, with painted central section. Height-adjustable feet.

Maximum temperature 300 °C. Digital setting and control of plate temperature with 1 °C resolution and cast aluminium/silicon alloy top plate. The 300 x 300 mm top plate model has a retort rod mounting at the rear of the housing. With BioCote, silver-based, antimicrobial protection.

With thermostatic temperature control. CERAN® glass ceramic material is highly resistant to breakage and changes in temperature, free from distortion, permeable to infrared light and highly acid-resistant. Bench-top instrument with built-in controller.

Hotplate Cimarec™+ offer excellent safety and temperature performance for routine heating applications in the laboratory.Temperature adjustable in 1 °C incrementsHot Top warning light is activated when the hot plate surface is above 50 °CAutomatic overheating protectionEasy-to-read LED displayRaised display design protects electronics from spills

An alternating current safety controller for variable and no-loss control of hotplates, heating tapes, soldering irons, light bulbs, infrared radiators etc.Potentiometer scale adjustment and electronic triac switch monitoring. Controller switches irreversibly to dipole in the event of triac switch malfunction and visual and audible alarms operate immediately. This ensures optimum safety.Voltage220-235V 50 / 60 HzSwitching capacityMax. 2300 VASwitching currentMax. 10 AElectronicsPhase controlsRegulating range10 to 235 V a.c.Anti-interferenceGrade NDimensions:188 x 110 x 70 mmWeight1.2 kg

The REC 7 Digital is equipped with a ceramic plate and ensures maximum homogeneity, thermal efficiency and temperature stability. The ceramic plate is resistant to chemicals and scratches, and is easy to clean. An external temperature sensor or the VTF temperature controller can be connected for precise thermoregulation of the sample. The temperature can be set easily using the digital display and the rotary knob. The hot indicator signals when the plate temperature is above 50 °C, even if the heating function is not active.

The hotplate is designed for safety and versatility across research, academic and industrial settings. It offers powerful heating with premium hardware and software to support users safely and reliably.SmartHeat™ safely controls and monitors the maximum temperatureSafetyHeat™ assures safety in heating applications with dual monitoring of system healthWith connection for temperature sensor (Pt 100, Pt 1000)Run dry protection with alarmTimer from 1 min to 99 h 59 minWith RS232 interfaceScope of supply: Hotplate, temperature sensor Pt 1000, sensor holder kit

The hotplate is designed for safety and versatility across research, academic and industrial settings. It offers powerful heating with premium hardware and software to support users safely and reliably.SmartHeat™ safely controls and monitors the maximum temperatureSafetyHeat™ assures safety in heating applications with dual monitoring of system healthWith connection for temperature sensor (Pt 100, Pt 1000)Run dry protection with alarmTimer from 1 min to 99 h 59 minWith RS232 interfaceThe hotplate is designed for safety and versatility across research, academic and industrial settings. It offers powerful heating with premium hardware and software to support users safely and reliably.SmartHeat™ safely controls and monitors the maximum temperatureSafetyHeat™ assures safety in heating applications with dual monitoring of system healthWith connection for temperature sensor (Pt 100, Pt 1000)Run dry protection with alarmTimer from 1 min to 99 h 59 minWith RS232 interface

Heating plate with two individually controllable positions and intuitive control panel for a variety of general temperature control tasks in the laboratory. The aluminium alloy heating plates ensure high temperature homogeneity and optimum heat transfer over the entire surface. Two illuminated indicators signal when the heating is on. The symbol stays on when the temperature of the plate is above 50 °C, even when the device is switched off. Other safety functions, such as overtemperature protection and safety circuits, protect during daily operation.

Heating plate with large ceramic plate for demanding temperature control tasks in the laboratory. An external temperature probe can be connected for precise thermoregulation of the sample. The temperature can be easily set and monitored via the bright and user-friendly digital display. The ceramic plate is resistant to chemicals and scratches, and is easy to clean. A warning symbol indicates when the plate temperature is above 50 °C, even when the device is switched off. Advanced safety functions protect during daily operation.

Reliable, analogue hotplate for general heating applications. Ideal for educational institutions and other laboratory environments.User-friendly rotary knob control for easy operationHot top indicator illuminates when the heating element temperature is above 40 °CWith build-in support rod holderEasy to clean top plateDurable metal housingWith square top plate made of ceramic

Reliable, analogue hotplate for general heating applications. Ideal for educational institutions and other laboratory environments.User-friendly rotary knob control for easy operationHot top indicator illuminates when the heating element temperature is above 40 °CWith build-in support rod holderEasy to clean top plateDurable metal housingWith round top plate made of ceramic-coated stainless steel

Hotplate made of aluminium alloy ensures good temperature homogeneity and optimal heat transfer. Ideal for everyday laboratory applications, such as preparing basic solutions and media, as well as dissolving buffers and reagents.Inclined control panel for optimal visibilityRobust die-cast aluminium housingVery good chemical resistanceAnalogue temperature controlHot warning indicator when plate temperature exceeds 50 °CSafety functions protect the user in daily operation (safety circuits, overtemperature protection)

Hotplates with accurate temperature control.Spill-resistant front control panel with chemically toughened glass for extra resilienceHot surface warning light flashes when plate temperature is above 50 °CDurable chip-resistant aluminum top plate offers excellent heat transmission, rapid heating, and oven temperature distributionCeramic top plate is chemical resistant and easy to clean, plus the white surface ensures good visibility of colour changesWith an integral fixing point for a retort rodWith BioCote, silver-based, antimicrobial protection

The EB-C series is designed for table installation, and is supplied with installation suspension. The separate controller housing can be installed directly into the table frame. Electrical connections between controller housing and hotplate are protected by a flexible metal hose. Conductor length between controller housing and hotplate 0.65 m.Heated area marked on CERAN® heating surfaceNo heat loss to table top and heating surface edges

Hotplates with accurate temperature control. Durable chip-resistant aluminum top plate offers excellent heat transmission for rapid heating and even temperature distributionSpill-resistant front control panel with chemically toughened glass for extra resilienceThe set and actual temperature is shown on the displayMains-independent warning light for surface temperatures above 50 °CIntegrated fitting for a retort rodCoated with BioCote® antimicrobial protectionScope of supply: Hotplate, PTFE-coated temperature sensor

Plate made of robust aluminium-silicon alloy with a thin ceramic coating for added chemical resistance.Flashing "Hot" warning light for temperature above 50 °C, mains independentAccurate temperature control with LED setting scaleCompact, space saving designIntegral fitting for a retort rodCan be used with TC-200D digital temperature controllerWith BioCote®, silver-based, antimicrobial protection.

With glass ceramic top plate. The surface is easy to clean and allows high plate temperatures for faster heating.Flashing "Hot" warning light for temperature above 50 °C, mains independentAccurate temperature control with LED setting scaleCompact, space saving designIntegral fitting for a retort rodCan be used with TC-200D digital temperature controllerWith BioCote®, silver-based, antimicrobial protection.

LabHEAT®-Heating elements for flasks, round bottom. Serial heating unit in plastic coated, chemical-resistant metal housing with six heating positions. Each heating position is separately controlled via controller, 1.5 m supply (earthed) cable and RCD (residual current detection).Size and rating specifications are valid for each heating position.

Multiple hotplate systems, 360 W, with individually adjustable heating controls and indidicator lights. Maximum surface temperature 400 °C.

Adjustable hotplates for general laboratory use. A metal grille protects the user against inadvertent contact with the hot surface and also prevents the vessel from falling off the hotplate.

Using an ultra-efficient, infra-red heater of just 900 W power this hotplate will boil 1 litre of water over 30 % faster than a conventional ceramic hotplate of 1200 W. Ideal for heating and stirring large volumes of liquid.Chemically resistant glass ceramic top plateFlashing "Hot" warning light for temperature above 50 °C, mains independentWith BioCote®, silver-based, antimicrobial protection.

Made of glass ceramic which offers excellent chemical resistance.Fixed safety circuit of 550 °CHot Top indicator: Hot surface warning to prevent burnsExact temperature setting via digital display (LED)Digital error code displayRaised control panel for protection against spilt liquidsMade of glass ceramic which offers excellent chemical resistance.Fixed safety circuit of 550 °CHot Top indicator: Hot surface warning to prevent burnsExact temperature setting via digital display (LED)Digital error code displayRaised control panel for protection against spilt liquids

The multi position (extraction) mantles have a built-in electronic controller. The vented case's unique air flow ensures that the outer case does not heat up, preventing burns when touching it.Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching3 support rods with 12.7 mm diameter are includedTop cover is made of polypropylene and external surfaces are powder coated, for good general chemical resistanceCoiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transferEarth (ground) screen encloses the heater for added safetyIndividual heater cartridges are replaceableNeon lights indicate when power is onAllow the solution to be stirred and heated simultaneouslyProvide stirring speeds of between 50 to 1000 rpmOne stirring control operates each set of three recesses

The multi position (extraction) mantles have a built-in electronic controller. The vented case's unique air flow ensures that the outer case does not heat up, preventing burns when touching it.Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching3 support rods with 12.7 mm diameter are includedTop cover is made of polypropylene and external surfaces are powder coated, for good general chemical resistanceCoiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transferEarth (ground) screen encloses the heater for added safetyIndividual heater cartridges are replaceableNeon lights indicate when power is onThe multi position (extraction) mantles have a built-in electronic controller. The vented case's unique air flow ensures that the outer case does not heat up, preventing burns when touching it.Individual built-in solid state electronic controls enable easy regulation of heater, while removing sparking associated with mechanical switching3 support rods with 12.7 mm diameter are includedTop cover is made of polypropylene and external surfaces are powder coated, for good general chemical resistanceCoiled heating element is suspended within a thermal insulating cartridge to provide maximum heat transferEarth (ground) screen encloses the heater for added safetyIndividual heater cartridges are replaceableNeon lights indicate when power is on

LabHEAT®-Heating elements for flasks, round bottom. Serial heating unit in plastic coated, chemical-resistant metal housing with three heating positions. Each heating position is separately controlled via controller, 1.5 m supply (earthed) cable and RCD (residual current detection).Size and rating specifications are valid for each heating position.

For continuous operation. Electric hotplates with stepless perfomance control. With aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Stainless steel housing, with painted central section. Height-adjustable feet.

For continuous operation. Electric hotplates with stepless perfomance control. With aluminium alloy hotplate. Excellent uniform temperature distribution over entire heating surface. Stainless steel housing, with painted central section. Height-adjustable feet. Mains cable approximately 1.7 m.

Electronic alternating current adjuster for easy control of resistance power equipment such as hotplates, soldering irons, light bulbs, infrared radiators, universal motor speed regulators, stirrers etc. With high rating fuse, 2 pin on/off luminous rocker switch and shielded, fused Schuko socket.Adjustment 10 to 230 V, fitted with an interference suppressor in accordance with EN standard.

Automatic, precise regulation of temperatures between 20 and 450 °C. Digital presetting and temperature display. Three power levels (825 W, 1650 W and 3300 W) can be set and an additional electronic power controller (adjustable 10 % to 100 %) is provided. At 825 W and 3300 W settings the entire plate surface is heated. At 1650 W setting only the right hand side of the plate is heated. As a result of heat conduction, the temperature from the right hand side to the left edge of the plate varies by approx. 40 %. Built-in relay allows direct connection of electronic contact thermometers. With solid, flat, low-distortion, cast GG15 alloy. Switching differential ±1 K.

High-performance CERAN® glass ceramic hotplate with circular heating area Ø 145 mm and square placement surface made of glass ceramic (175 x 175 mm), stainless steel housing, power controller (adjustable 10% to 100%) and integral temperature monitor.