When dispensing combustible/explosive liquids pump, both dispensing and filling drum involved in the process must be sufficiently earthed, in order to prevent ignition or explosion through electrostatic discharges. Antistatic set, includes three colour-coded connecting cables with clamps, supplied complete in plastic case.

For liquid flows down to 5 ml/sec. Wheel spins freely and speed of rotation is proportional to flow rate. Maximum recommended flow rate up to 95 ml/sec, max 2 bar pressure. Not to be used with corrosive fluids or over +85 °C. Can be used with gases.

With 2 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380 mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

With 3 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

The extra compact peristaltic pump. Ideal for continuous dosing applications. Space-saving, robust and with a wide range of easily exchangeable pump heads.Stable flow ratesCompact designReversible working directionPump heads easily exchangeableVarious pump heads with different hose diameters available as accessoryLow power consumptionCorrosion-resistant ABS housingOLED display for indication of speed and working directionWorking temperature range from 0 to 40 °CMax. humidity 80 %Scope of supply: Pump, pump head, Pharmed® hose connectors 3 mm ID, 5 mm AD

For contamination-free removal of organic solvents and flavouring agents. Can be completely closed off with two ball valves so that no dangerous vapours can escape after dispensing. Electrostatic charge can be dissipated through the accessory antistatic set (please order separately).Medium-contacting parts are made of stainless steel (1.4301) and PTFEFor containers up to 60 litresIncl. connector thread for pull-out spouts with Ø 35 mm

Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor weak acids, alkalis and detergents

The peristaltic pump with high pumping capacity. Ideal for continuous dosing applications. Space-saving, robust and with stable flow rate.High pumping capacity of 398 ml/minReversible working directionHose connectors easily exchangeableLow power consumptionCorrosion-resistant ABS housingOLED display for indication of speed and working directionWorking temperature range from 0 to 40 °CMax. humidity 80 %Scope of supply: Pump, pump head, Pharmed® hose connectors 6,4 mm ID, 9,6 mm AD

Feed pump for standard applications. The speed is adjustable with the analog control knob and stays constant even under changing loads.Feed direction reversibleFor safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheatingPump heads with convex rollers for cell protection are available for use in cell biologyThe flow rate depends on the used pump head. The pump head is not included. Please order separately.This pump drive is only suitable for use with single-channel pump heads.

These new magnetic drive pumps are designed for pumping acids, bases, mixtures of acids and bases, solvents, photochemicals into alkali stripping baths, galvanic baths, as well as radioactive, sterile, expensive or highly corrosive liquids. The pumps are sealless. The impeller is driven by the magnetic force of the outer magnets, therefore no mechanical seal is required. As the pump housing is hermetically sealed no leaks can occur. The use of high performance, permanent magnets, ensures high transmission forces even at elevated temperatures.viscosity up to 20 mPaspump complete with flanged-to motorMotor 230 V, material PP (fibre-glass reinforced), stainless steel (shaft), Viton® (O-ring), tubing connection 14 mm

Fast and convenient tube changesLow pulsation due to 5 roller systemPump head features ball bearingsRollers made of stainless steelFor tubes with a 1.6mm or 2.5mm wall thickness (wt)Depending on drive and tubing, the flow rate ranges from 0.38 to 3436 ml per minute

For Bürkle pumps and discharge stopcocks.

The manual pressure pump is ideally suited for drawing off, decanting and emptying canisters and barrels. The hand pump is used to create excess pressure that forces the liquid out of the container. The stopcock also allows extraction of small quantities of liquid. The PumpMaster container pump is mounted on the container using a flexible stopper with a variable and adjustable diameter. No special thread adapters are required. PumpMaster fits all commercial container openings with a diameter from 46.5 mm to 60 mm. The immersion tube has a length of 95 cm and it can be shortened depending on the size of the container.Green. FKM gasket.Scope of supply: Drum pump, three bungs in different sizes

Incl. PharMed® tubing.

Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small sizeApplication: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size

Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small sizeApplication: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size

With adapter for coupling (NW 7.2) or compressed air hose with an inner diameter of 9 mm.

Application: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small sizeApplication: Metering liquidsPump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKMFlow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)Additional safety diaphragm for maximum securityEasy exchange of the transfer diaphragm by activating the maintenance command in the operating programAdvantages:Intuitive operation, easy calibrationAdjustable to liquid characteristicsSelf-priming and dry-runningSpray water protected IP 65Small size

Independent 4-Channel Control PumpIncreased efficiencyControl of complex pump applications with only one pumpControlled by computer or directly through the control panel on the pumpContinuous pumping and precise dosingFlexible bi-directional flow direction in each channelSelf-primingEspecially for viscous or foaming liquids, also when containing particles or live cellsContamination-free pumping even under sterile conditions

Dosing and Feeding pumps for reproducible results. Flow characteristics in combination with various tubing diameters are pre-programmed for accurate flow rate numbers. With freely selectable process parameters.Speed, direction of rotation and on / off function is controllable with an analog interface or digital with built-in RS232 interfacePre-programmed flow characteristics are shown in the displayDigital read-out of Speed, Tubing diameter, Flow rate, Dosing volume, Interval dosing, Pause functionWith buttons for selecting all process parametersEasy calibration of flow volume and flow rateSmooth start operation prevents from spills and splashing mediaA press of the max button accelerates the filling and draining of the tubingFor safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheatingOptional foot switch to operate pump drive in closed fume hoods and to facilitate filling operationsPump heads with convex rollers for cell protection are available for use in cell biologyThe pump head is not included. Please order separately.With an optional pump head adapter the Hei-FLOW Ultimate 120 can be upgraded for multi-channel operation.

For rapid and clean emptying from cans, drums and small barrels up to 60 l.Medium-contacting parts made of PP, PE and FKMPrecise dosing, without drippingPump connection suitable for 64 mm dia. (BSI) container threadsStepless length adjustment of immersion tubeThreaded adapters for most commercially-sold containers availableNot suitable for HCl

For decanting acids, caustic solutions and aggressive detergentsExcellent recovery of residual liquid in the barrel provided by base-sitting, non-return valve and steplessly adjustable immersion tubeFor barrels and tanks from 30 to 1000 l

For filling off high purity liquids such as solvents. Due to the barrel screw joint and the stopcock, the container and the pump can be hermetically sealed. Electrostatic charge can be dissipated through the accessory antistatic set (please order seperately).Medium-contacting parts made of stainless steel (1.4301) and PTFEFor barrels up to 220 litres, immersion tube can be steplessly adjusted to the barrel depthSuitable for steel barrels with R 2'' thread

Lightweight and powerful pump for transferring small amounts of aqueous liquids up to 300 mPas from cans and drums with infinitely variable speed controller.Motor 230 V, 200 W (IP 24)Seal less pump tubeSuitable accessory flow meter requiredPump with tubing connectionStainless steel version for low-viscosity lubricants.Scope of supply: Motor B2 Vario, pump tube, PVC spiral hose (1.5 m), hose connectors, hose clamps, Lutz nozzle, wall bracket

Nickel-plated brass. G 2" steel fine outer thread.

Thread adapter set consisting of:3/4'' Hünersdorff3/4" Kautex3/4" cylindrical R 3/4" barrel thread3/4" conical R 3/4" barrel threadHex wrench for threaded adapter

Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of stainless steelUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor liquids that are not easily flammable in Hazard Category AIII (VbF)

Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of stainless steelUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor liquids that are not easily flammable in Hazard Category AIII (VbF)

For StopCock spigots and ball valves.

Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPFor small containers, up to 10 lUniversal bungs made of soft PVC, for container openings of 20 – 36 mmFor weak acids, alkalis and detergents