Test materials can be used to check analytical sieves between the schedulded calibration dates and to demonstrate the presence of the required properties, as well as the suitability of analytical sieves. A test material for analytical sieves with frequent mesh widths ( 2.0mm - 1.0mm - 0.5mm - 0.25mm - 0.125mm ).Pack of 3 bottles, 202g eachGrain size : from 0.125mm to 2.00mmData sheet for the use of traceability for analytical sievesEach bottle contains a mixture of different sizes.

In accordance to ISO 3310-1:2016 and ASTM E11:2009.Further collecting pans available on request.

Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.

Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sievePreviously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieve

Thermo-fixed Polyamide (Nylon) mesh is temperature stable from -40 °C to 115 °C. In water from 95 °C to 100 °C. Stability in acids is limited and dependent on concentration and temperature. Nylon exhibits outstanding stability in alkalis, including sodium and potassium solutions. Its chemical behaviour with respect to organic solvents is moderate to good. Minimum mesh width: 102 cm, Length: 1 mOther sizes available on request.

Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.

Frame and mesh made of stainless steel, according to ISO 3310-1, with compliance certificate. Further test sieves and sieving accessories in other diameters and mesh widths also according to ASTM on request.

Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1

Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.

To provide separation of pourable powders and bulk materials on site and in the laboratory. Operates independently of mains supply. Available in 6 sizes. Number of samples: 2.

Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1Sturdy stainless steel sieve frameSmooth frame surfacePrecise mesh sizesAccurate edgesWith serial number and data matrix codeIncl. Certificate of Compliance 2.1 acc. to DIN EN 10204Manufactured acc. to DIN ISO 3310-1

Frame made from POM, sieve fabric made from polyamide according to ISO 3310-1 with a compliance certificate. Further mesh widths also according to ASTM on request.

Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.

Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspectionHigh quality joining technology guarantees permanently taut wire meshHigh level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel"one-piece cast" sieve frame and seamless mesh joint prevent cross contaminationMaximum stability and optimum density of the sieve stackClear sieve marking and traceability by individual laser engraving on each sieveDIN ISO 3310-1.

Sieve shakers are used in research and development, quality control of raw materials, interim and finished products as well as in production monitoring.Digital display of performance and timeFor dry and wet sievingShort sieving timesEfficient electromagnetic driveThrowing motion with angular momentumMaintenance-freeMax. number of fractions 9/17Please order clamping device, test sieves and collecting pan separately.

Frame and mesh made of stainless steel according to ISO 3310-1 with a compliance certificate.Further test sieves and sieving accessories in other diameters and mesh widths also according to ASTM on request.

Sound absorbing cabinets can reduce the noise level by up to 28 dB (A). They also have a recess for power cables, connection cables and hoses.

The test sieve shakers generate a three-dimensional sieving motion for fast and reproducible sieving results. Thanks to G-Control, a constant amplitude is made possible.Timer: 0 to 99 minutes or continuous operationWith inspection glass coverFor test sieves with a sieve diameter of 50 mm to 203 mmSuitable for dry and wet sievingSeparate control unitCover with integrated full cone nozzleWith Ethernet interfaceFree amplitude selection up to 3 mm in 0.1 mm stepsInterval adjustable (1 to 99 seconds)Up to 49 programme memory locationsScope of supply: Test Sieve Shaker, cover with inspection glass and full cone nozzle, clamping system (2 guide rods M20 x 660 mm, 2 clamping nuts), 1 water plug with socket and 2 hose clips, 1 PVC water hose (length 3 m), Basic licence of the evaluation software CSA

With the optional dividing heads, the filled sample material can be divided into 6, 8 or 10 equal subsamples. The composition of each subsample corresponds exactly to the total sample. In addition, the bulk material is added and divided automatically and without loss of material.High division accuracyModular designDigital time settingSpeed monitoring and constant speed controlMaintenance-freeEasy collection and cleaningScope of supply: Rotary sample divider RSD200, vibration feeder VF200, 10 sample bottles of 250 mlPlease order rotary dividing heads separately.Number of divisions:6/8/10 (depending on dividing head)Sample bottle capacities:10/25/50/100/250/500 mlTimer:1 min ... 99 h 59 minDimensions (W x D x H):460 x 456 x 850 mmWeight:30 kgPower supply:220 V, 50/60 HzSpeed range:80 ... 120 rpm

Vacuum cleaner with automatic filter cleaning system Tact. Targeted, powerful blasts of air automatically clean the filter itself, the suction power remains constantly high.Dust class L (max. permeability 1 % acc. to EN 60335-2-69)Removable filter housingAir flow rate 150 m3/hVacuum 230 mbarThis vacuum cleaner is not designed for continuous operation.

Allows the use of existing and non-NEXOPART sieves.

Allows the use of existing and non-NEXOPART sieves.

For active dedusting of the process air. Pre-separator system with robust steel housing. With removable 13 l collection bin and half-automatic Dust-Stop filter cleaning.Dust class type H acc. to EN 60335-2-69, separation of different dust types with all exposure limits, including carcinogenic and pathogenic dustsHEPA filter, filter class (EN 1822) H14 with a filter surface of 2.05 m2Antistatic, ATEX Zone 22 marking II 3 D

For active dedusting of the process air. Pre-separator system with robust steel housing. With removable 13 l collection bin and half-automatic Dust-Stop filter cleaning.Dust class type H acc. to EN 60335-2-69, separation of different dust types with all exposure limits, including carcinogenic and pathogenic dustsHEPA filter, filter class (EN 1822) H14 with a filter surface of 2.05 m2

For active dedusting of the process air. Pre-separator system with robust steel housing. With removable 13 l collection bin and half-automatic Dust-Stop filter cleaning.Dust class type M acc. to EN 60335-2-69, for separating dust with an exposure limit value of higher than 0.1 mg/m3Polyester filter cartridge with a filter surface of 1.2 m2Antistatic, ATEX Zone 22 marking II 3 D

For active dedusting of the process air. Pre-separator system with robust steel housing. With removable 13 l collection bin and half-automatic Dust-Stop filter cleaning.Dust class type M acc. to EN 60335-2-69, for separating dust with an exposure limit value of higher than 0.1 mg/m3Polyester filter cartridge with a filter surface of 1.2 m2

For the safe and clean recovery of sieve material without contamination by e.g. filter fluff. Suitable for material quantities up to 1 litre. Dismantlable and washable stainless steel design.

Electrical regulation unit for connecting vacuum cleaners of different brands.

Vacuum cleaner for use with the air jet sieve machine e200 LS eControl.Air flow rate 350 m3/hVacuum 100 mbar

Air jet sieve machine for separating, fractionating, and determining the particle size of fine to very fine powders. The device delivers precise measurement results and ensures high reproducibility. It is also characterised by its user-friendly and simple operation via the touch display.Stainless steel cast housingReduced noise level thanks to new intake silencerDiagnostic tool with self-monitoring of all electronic componentsSuitable for sieve diameter 76 mm, 200 mm, and 203 mmMeasuring size 20 µm to 4 mm (sieve Ø 200/203 mm), 10 µm to 2.5 mm (sieve Ø 76 mm)Automatic sieve detection (RFID)Automatic underpressure controlFast, simple evaluation of the results (in tabular form)Balance communication via RS-232 interfaceCentral parameter management of all sievesAutomatic saving and printingSieve set management (SOP)Automatic backupRequirements for software validation as classified in ISPE GAMP 5, FDA 21 Part 11, compliant with EC GMP Annex 11Scope of supply: Air jet sieve machine, software version SECURITY, sieve adapter, slottet nozzle, acrylic glass lid, suction silencer, hammer and brush, connection piece, power connection cable, operating manualPlease order vacuum cleaner separately.

Air jet sieve machine for separating, fractionating, and determining the particle size of fine to very fine powders. The device delivers precise measurement results and ensures high reproducibility. It is also characterised by its user-friendly and simple operation via the touch display.Stainless steel cast housingReduced noise level thanks to new intake silencerDiagnostic tool with self-monitoring of all electronic componentsSuitable for sieve diameter 76 mm, 200 mm, and 203 mmMeasuring size 20 µm to 4 mm (sieve Ø 200/203 mm), 10 µm to 2.5 mm (sieve Ø 76 mm)Automatic sieve detection (RFID)Automatic underpressure controlFast, simple evaluation of the results (in tabular form)Balance communication via RS-232 interfaceCentral parameter management of all sievesAutomatic saving and printingSieve set management (SOP)Automatic backupScope of supply: Air jet sieve machine, software version ULTIMATE, sieve adapter, slottet nozzle, acrylic glass lid, suction silencer, hammer and brush, connection piece, power connection cable, operating manualPlease order vacuum cleaner separately.

Air jet sieve machine for separating, fractionating, and determining the particle size of fine to very fine powders. The device delivers precise measurement results and ensures high reproducibility. It is also characterised by its user-friendly and simple operation via the touch display.Stainless steel cast housingReduced noise level thanks to new intake silencerDiagnostic tool with self-monitoring of all electronic componentsSuitable for sieve diameter 76 mm, 200 mm, and 203 mmMeasuring size 20 µm to 4 mm (sieve Ø 200/203 mm), 10 µm to 2.5 mm (sieve Ø 76 mm)Automatic sieve detection (RFID)Automatic underpressure controlFast, simple evaluation of the results (in tabular form)Balance communication via RS-232 interfaceCentral parameter management of all sievesScope of supply: Air jet sieve machine, software version BASIC, sieve adapter, slottet nozzle, acrylic glass lid, suction silencer, hammer and brush, connection piece, power connection cable, operating manualPlease order vacuum cleaner separately.

Air jet sieve machine for separating, fractionating, and determining the particle size of fine to very fine powders. The device delivers precise measurement results and ensures high reproducibility. It is also characterised by its user-friendly and simple operation via the touch display.Stainless steel cast housingReduced noise level thanks to new intake silencerDiagnostic tool with self-monitoring of all electronic componentsSuitable for sieve diameter 76 mm, 200 mm, and 203 mmMeasuring size 20 µm to 4 mm (sieve Ø 200/203 mm), 10 µm to 2.5 mm (sieve Ø 76 mm)Simple one-touch operationExternal vacuum cleaner can be integratedDisplay of underpressure (in Pa), sieving time, date, and timeManual underpressure controlScope of supply: Air jet sieve machine, software version LITE, sieve adapter, slottet nozzle, acrylic glass lid, suction silencer, hammer and brush, connection piece, power connection cable, operating manualPlease order vacuum cleaner separately.

For reliable, representative sample division of solids and suspensions without conversion. Divides the samples at up to 3000 graduations per minute into up to 30 partial streams via a rotating cone head. Dividing accuracy up to 99.9 %. Can be combined with 6 different dividing heads.Compact basic unit with robust cast aluminium housingEasy cleaning due to removable dividing headvariable partition ratiosMaintenance-free drive motor with slipping clutchQuick clamping device for sample tubes 250 and 500 mlFor optimum sample allocation, the vibratory feeder LABORETTE 24 (optional) is recommended.SpecificationsDivision ratio:1:8, 1:10, 1:30Number of subsamples:8, 10, 3Max. feed particle size:10 mm, 2.5 mmMax. sample quantity:4000 ml, 2500 ml, 300 mlSample bottle capacities:15, 20, 30, 32, 250, 500 mlPower supply:230 V/1~, 50-60 Hz, 90 WDimensions (W x D x H):270 x 450 x 460 mmNet weight:7.7 kgInstrument also available in other voltages.Dividing heads must be ordered separately.

All dividing heads are delivered inclusive of sample bottles and funnels.