Receiver adapters, with olives, DURAN® tubing, straight
Product number:
9012611
Manufacturer:
Lenz-Laborglas GmbH & Co. KG
Packaging information:
Length:
131 mm
Width:
58 mm
Height:
30 mm
Weight:
0.027 kg
Description
Made of DURAN® tubing. Acc. to DIN 12594, with NS socket and cone, with drain tip, vacuum connection: glass olive.
Properties
| Cone[s]: | NS14/23 |
|---|---|
| Connection: | Glass olive |
| Manufacturer Article Number: | 05272001 |
| Material: | DURAN® tubing |
| Shape (Glass components): | Straight |
| Socket[s]: | NS14/23 |
| Standard: | DIN 12594 |
Skip product gallery
From
CHF 41.30*
Other customers also bought
Lenz-Laborglas GmbH & Co. KG
Lenz-Laborglas GmbH & Co. KG
Receiver adapters, with olives, DURAN® tubing, bent 105°
Made of DURAN® tubing. Acc. to DIN 12594, with NS socket and cone, with drain tip, vacuum connection: glass olive.
Skip product gallery
From
CHF 9.30*
From
CHF 30.90*
From
CHF 19.00*
From
CHF 3.70*
From
CHF 55.20*
From
CHF 2.00*
From
CHF 36.30*
From
CHF 37.00*
From
CHF 4.80*
From
CHF 6.30*
From
CHF 9.50*
Accessories
Otto Fahsig GmbH
Otto Fahsig GmbH
Gas leak detection fluid, bottle
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.
Buddeberg GmbH
Buddeberg GmbH
BUDDE - joint grease
For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.
J.P. Pöllath
J.P. Pöllath
Joint grease, K.W.S
Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.
H W S Hans W. Schmidt
H W S Hans W. Schmidt
Ground joint clips for sleeve connections, wire, Chrome-nickel steel
Chrome-nickel steel.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Engler distilling flasks, DURAN®, ASTM, with beaded rim
Uniform wall thickness distribution makes these flasks ideal for heating applications and distillations. The flasks are manufactured from a hydrolytically resistant borosilicate glass 3.3, which is defined as "Type I, Class A" in the ASTM Specification E 438.ASTM D86DIN EN ISO 3405
Bohlender GmbH
Bohlender GmbH
Sleeves with ribs, PTFE
For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.
Dr. Dietmar Glindemann
Dr. Dietmar Glindemann
PTFE sealing rings for jointed glassware
An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage
Lenz-Laborglas GmbH & Co. KG
Lenz-Laborglas GmbH & Co. KG
Joint clips for conical joint sleeve connections, stainless steel, with set screw
For tapered ground joints as outlined belowWith or without set screwFor tapered ground joints as outlined below
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for conical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for spherical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
Bohlender GmbH
Bohlender GmbH
Sleeves, cone joint, PTFE
With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.
Skip product gallery
Distilling links with Liebig condenser and vacuum receiver adapter, DURAN® tubing
From
CHF 125.00*
Distributors for distilling receivers to Bredt, DURAN® tubing
From
CHF 142.00*
Distilling links acc. to Claisen, with olive, DURAN® tubing
From
CHF 132.00*
Columns acc. to Vigreux, with removable glass jacket, DURAN® tubing
From
CHF 155.00*
Multiple adapters, 2-necks, DURAN® tubing
From
CHF 42.10*
Receiver adapters, with GL thread, DURAN® tubing, straight
From
CHF 54.40*
Delivery adapters, straight, with suction tube, DURAN® tubing
From
CHF 31.40*
Bends
From
CHF 18.00*
Receiver adapters, with olives, DURAN® tubing, bent 105°
From
CHF 41.30*
Similar products
Made of DURAN® tubing. DIN 12596. With Liebig condenser at 75° and vertical outlet with NS cone and vacuum connection with glass olives or thread GL14. With socket NS 14/23 for distillation thermometers of 55mm built-in length.
Made of DURAN® tubing. With four cones NS 14/23, for round bottom flasks up to 250ml volume.
Made of DURAN® tubing. With Liebig condenser and Claisen head, water connection with glass olives, with two sockets NS 14/23 for distillation thermometers of 55mm built-in length.
Made of DURAN® tubing.
Made of DURAN® tubing. With two sockets and one cone.One neck 105° upwards.
Made of DURAN® tubing. Receiver adapters acc. to DIN 12594, with NS socket and NS cone, with drain tip, vacuum connection: thread GL18.
Made of DURAN® tubing. Cone and socket, straight.
Manufactured from borosilicate glass 3.3 which is resistant to heat and almost all chemicals. Suitable for the usage of assembling various reactor systems. Available in two shapes: bend with angle 75° or 90°.
Made of DURAN® tubing. Acc. to DIN 12594, with NS socket and cone, with drain tip, vacuum connection: glass olive.