Safety bottles for safety suction system EcoVac, PP
CHF 365.70*
Content:
1
Delivery according to order confirmation
Product number:
9777007
Manufacturer:
schuett-biotec GmbH
Packaging information:
Length:
315 mm
Width:
228 mm
Height:
172 mm
Weight:
0.45 kg
Description
Replacement bottles made of PP for collecting the aspirated supernatant liquid from dishes, test plates, or tubes.
Supplied without house couplings. House couplings available on request.
- Autoclavable
- Breakproof and chemical-resistant
- Incl. screw cap with 2 self-locking fittings
Supplied without house couplings. House couplings available on request.
Properties
| Autoclavable: | Yes |
|---|---|
| Manufacturer Article Number: | 3350122 |
| Material: | PP |
| Nominal capacity: | 2 l |
| Type of closure: | Screw cap |
| UNSPSC: | 41121804 |
Skip product gallery
Aspirator LLG-uniVACUUSYS
From
CHF 1,387.20*
Fluid aspiration systems BioChem-VacuuCenter BVC professional, PP bottle
From
CHF 2,343.60*
Aspirator FTA-1
From
CHF 606.00*
Fluid aspiration systems BioChem-VacuuCenter BVC control, PP bottle
From
CHF 1,775.90*
Safety suction system EcoVac
From
CHF 342.60*
Microsart® Mycoplasma Detection Kits
From
CHF 1,067.00*
Microsart® Validation Standards
From
CHF 1,002.00*
Similar products
Tip
LLG-uniVACUUSYS Vacuum Aspiration System with integrated vacuum pump and vacuum controller is ideally suited for aspirating liquids in Life Science applications, e.g. the removal of media from cell cultures, aspiration of supernatants after centrifugation, or the removal of wash solutions from Immuno assay plates. The set vacuum is automatically re-adjusted in case of deviations.Integrated vacuum pump with vacuum controlEasy to useSelf-closing connectors for quick installation and prevention of liquid or aerosol escapeLiquid level sensor, prevents liquid overflowAutoclavable waste collection bottle and nozzlePlease order compatible 4l replacement bottle with 7.048 064.Scope of supply: Vacuum Aspiration System with integrated vacuum pump, 4 liter waste collection bottle, single channel needles and 8-channel needle aspirator handles, single channel and 8-channel adaptor for 200 µl pipette tips, single channel adaptor for 1000 µl pipette, tubing and quick-connectorsSpecificationsVacuum range:300 ... 600 mbar (adjustable)Aspiration rate:1 ... 15 ml/sNoise emission:50 dB(A)Dimensions (W x D x H):180 x 320 x 530 mmWeight:3.4 kgPower supply:100 ... 240 V, 50/60 HzWarranty:3 years
The BioChem-VacuuCenter BVC professional serves for aspiration and disposal of biological fluids, providing outstanding levels of comfort and safety for working with biological and biohazardous materials.With all the advantages of the BVC controlNon-contact sensor for electronic monitoring of the liquid level in the collection bottleDisinfection routine for the suction tubing for drawing in disinfectant after switching off the pumpFor professional work and a perfect fit for required safety protocolsWith self-closing quick couplings for convenient and safe bottle change
Designed for routine aspiration of the supernatent alcohol/buffer from the walls of microtubes during DNA/RNA purification and other macromolecule reprecipitation techniques.Fitted with hydrophobic microbiological filterThe hydrophobic microbiological suction filter eliminates risk of contamination from the trap flask. Efficiency up to 99.9 %, holds particles bigger than 0.027 micron, which are smaller than agents of Hepatitis A, B and C.Polyethylene tube connects collecting tip to the trapping flaskBuilt-in micro-compressor creates negative pressure in trapping flask for removal of liquid from microtubesScope of supply: Aspirator system with integrated pump, trap flask, aspiration tip and tube holders for 2 tubesSpecificationsAspiration rate:up to 10 l/minFlow rate:72 ml/min with collecting tip
666 ml/min without collecting tipPower supply:120 ... 230 VAC, 50/60 HzSpecificationsVolume Trap flask:1 lVacuum range:500 mbarDimensions (W x D x H):160 x 210 x 340 mmWeight:1.7 kg
The BioChem-VacuuCenter BVC control serves for efficient and convenient aspiration of supernatants with a powerful and long-lasting chemistry diaphragm pump, which is automatically turned on and off as needed.Extremely compact, space saving and low noise and thus the ideal tool in the workplaceEasy operation due to electronically adjustable suction power via touch panel, for strong or sensitive suction and reproducible operationAutoclavable collection bottle designed to reduce aerosol- and foam formationAspiration hand set VacuuHandControl (VHCpro) with flow-through suction tube, mechanics is not in contact with mediaHighly reduced contamination risks for the vacuum pumping system due to hydrophobic 0.2 µm sterilisable filterReady to accept a second aspiration hand controller (optional)The BioChem-VacuuCenter BVC control serves for efficient and convenient aspiration of supernatants with a powerful and long-lasting chemistry diaphragm pump, which is automatically turned on and off as needed.Extremely compact, space saving and low noise and thus the ideal tool in the workplaceEasy operation due to electronically adjustable suction power via touch panel, for strong or sensitive suction and reproducible operationAutoclavable collection bottle designed to reduce aerosol- and foam formationAspiration hand set VacuuHandControl (VHCpro) with flow-through suction tube, mechanics is not in contact with mediaHighly reduced contamination risks for the vacuum pumping system due to hydrophobic 0.2 µm sterilisable filterReady to accept a second aspiration hand controller (optional)
For safe and comfortable aspiration of liquid supernatants in cell culture. Increases work safety when handling with infectious material. Self-locking fittings close the bottle automatically and seal it hermetically for transport.Completely autoclavableBreakproof and chemical-resistant safety bottleSafety filter between bottle and pump prevents contamination and premature wearA commercial Pasteur pipette is used for aspiration (available separately)Please order optional vacuum pump separately.Replacement covers and other spare parts on request.Scope of supply: Safety suction system, safety bottle with screw cap and 2 self- locking fittings, silicone tubing 2 x 1.5 m (autoclavable), safety filter, 2 house couplings for tubing connection, 1 aeration insert
Rapid methods for the detection of mycoplasma contamination are essential for improving monitoring of the production process of biologicals. With the use of the Microsart® Mycoplasma the testing time can be reduced from weeks to just 3 hours.
Microsart® Validation Standards are quantified CFU preparations, containing 10 CFU per vial, optimized for validating NAT based tests.