Safety temperature switch TEMPAT®-Control
messner emtronic
CHF 450.00*
Content:
1
Delivery according to order confirmation
Product number:
9725331
Manufacturer:
messner emtronic
Packaging information:
Weight:
0.643 kg
Description
Safety temperature switch for monitoring temperature-based routines of all kinds. Ideal for monitoring simple temperature controllers. The TEMPAT® Control device switches off when the limit temperature is obtained; a beep is heard. When the temperature drops below limit, the limit contact does not switch on automatically; it must be reset by the user.
| Specifications | |
| Voltage: | 220-235V ~ 50/60Hz |
| Switching capacity: | max. 1800VA |
| Switching current: | max. 8A |
| Measuring accuracy: | ±1% |
| Dimensions: | 150 x 80 x 55mm |
| Weight: | 0.65kg |
Properties
| Manufacturer Article Number: | 32101037 |
|---|---|
| Temp. range °C: | 0 - 1200 |
| Type: | TEMPAT®-Control NiCr-Ni |
Skip product gallery
Cooling water relay LKR 3000
From
CHF 345.00*
Laboratory temperature regulator LC4
From
CHF 1,882.00*
Laboratory temperature regulator LC6
From
CHF 3,597.00*
Probe for temperature controllers, TEMPAT®
From
CHF 200.00*
Power controller, VOLTRON-PLUS F
From
CHF 261.00*
Temperature controllers, TEMPAT®-DSI
From
CHF 1,280.00*
Temperature controllers, TEMPAT®-D
From
CHF 867.00*
Contact thermometers, accessory relay TST-tr
From
CHF 430.40*
Similar products
The device is used for moitoring cooling water circuits. Because of the high braking capacity thermostats and cryostats are also connectable. A reliable water flow sensor.SpecificationsPlastic housing (W x H x D):160mm x 82mm x 130mmLED indication:10mm high, greenAdjustment:min. 10 L/h up to max 250 L/hPower supply:230V / 50Hz, 16ABreaking capacity:16A/230V for consumer load, 1A/230V for magnetic valve
For monitoring and control of electronic heating equipment, such as heating mantles, heating baths, heating mats, water baths, oil baths etc. Fitted with state of the art control electronics.Multi-Display: separate (LED) temperature displays for set and actual values, and for high and low temperature warning and safety functionsSplashproof, membrane keypad which is easy to useDisplay resolution 0.1 °CAdjustable control parametersPID controlConnections for control and safety sensorsMax. switching capacity: 2 kW
For monitoring and control of electronic heating equipment, such as heating mantles, heating baths, heating mats, water baths, oil baths etc. Fitted with state of the art control electronics.Multi-Display: separate (LED) temperature displays for set and actual values, and for high and low temperature warning and safety functionsSplashproof, membrane keypad which is easy to useDisplay resolution 0.1 °CAdjustable control parametersICC = Intelligent Cascade Control; adjustable classic PID controlAdditional LCD function display for user-friendly operationIntegral programmer (6 profiles with 60 segments)Connections for 2 control and 1 safety sensorsMax. switching capacity: 3 kW
All probes with 2m connecting cable and plug.* probe tube stainless steel 4301.** mantle of austenitic stainless steel.
Alternating current controller for variable and no-loss control of resistive and inductive power devices with the following additional features:On/off luminous rocker switch, dipole switching, 10 A (4)IC controlled, hysteresis freeQuiet runningAnti-interference grade NFast-blow fuseProtected fuse holderPower-on indicator lampSpecifications
Voltage:
220-235V, 50/60HzSwitching capacity:Max. 2000VASwitching current:Max. 10AElectronics:Phase controlsRegulating range:0 to 235V a.c.Dimensions:150 x 80 x 55mmWeight:0.7kg
Safety temperature controllers for regulating the temperature of heating coils, hotplates, ovens, infrared radiators and water baths with 7mm high LED display. A coding switch is provided for entering set points. For optimum safety: Irreversible safety contact breaker with secondary sensor input and dipole switch-off in the event of overtemperature or sensor malfunction. Visual and audible alarms. Critical temperature values are set using potentiometer and controlled via the display.Appropriate temperature sensor please order separately.For each operating two sensors per thermostat is required. Please order separately.Specifications
Voltage:
220-235V, 50/60HzSwitching capacity:max. 1800VASwitching current:max. 8 AMeasuring accuracy:±1%Dimensions:188mm x 110mm x 70mmWeight:1.1kg
For controlling temperature of heating coils, hotplates, ovens, infrared radiators and water baths. TEMPAT®-D has a 10mm high, LED display which can even be seen in dark rooms and allows monitoring of actual temperature at any time. Set point can be entered via a 3 or 4 figure coding switch with 1°C resolution. Built-in sensor breakdown fuse, switching interval display and Xp trimmer to adjust variable gain amplification between 0 and 10K. Sensor connection is via a plug-in socket.Appropriate temperature sensor please order separately.If no temperature sensor is ordered, a loose plug is supplied.SpecificationsInput:
Switching capacity:230V, 50/60Hz
2300W, 10AConnection, appliance:1.20M long connection cable with impact resistant plugConsumer load:earthed schuko socket, other plug-in connections in accordance with Swiss or French/Belgian standards, for example can be supplied at additional cost.Housing:
Dimensions:Polycarbonate plastic, gray
188mm x 110mm x 70mmOn/off switch:via dipole luminous rocker switchProbe connection:via socketContact assignment Pt100:1 and 2Contact load:1 + 3Accuracy:±1% from measuring range value
With Schuko power output socket and discrete control circuit. Plastic housing insulated to VDE. Automatic on/off switch. Will not function unless a contact thermometer is plugged in. Switch status display. Dimensions (W x D x H) 120mm x 80mm x 85mm. Switching capacity 220V 10A.