Screw caps for screwthread tubes, PBT
Product number:
6201839
Manufacturer:
Lenz-Laborglas GmbH & Co. KG
Length:
17 mm
Width:
13 mm
Height:
20 mm
Weight:
0.003 kg
* Specifications refer to the packaging unit
Red. With DIN thread (GL) and aperture. temperature resistant up to 180°C.
| Bore mm: | 11.0 |
|---|---|
| Manufacturer Article Number: | 01321018 |
| Thread GL: | 18 |
| UNSPSC: | 41-10-48-14 |
Similar products
Red. With central hole (diameter outlined below). Temperature resistance to max. 180°C.
For GL-screwthread caps. Overall diameter and wad thickness as outlined below. Thermical resistance: 130°C (steam) / 200°C (heat). Autoclavable.
Made of DURAN® tubing. DIN 12257 and in addition to DIN standard. With GL thread and NS core.
Made of DURAN® tubing. DIN 12257 and in addition to DIN standard. Reduction adapters with ground joint.
With vulcanized PTFE sleeveFor screwthread capsThermical resistance: 130°C (steam), 200°C (heat)Autoclavable
Red. With DIN thread (GL) and aperture. temperature resistant up to 180°C.
Manufactured from borosilicate glass 3.3 in two different forms, straight or 90° angled. Supplied with PTFE stopcock which has of 2.5mm diameter bore key. Tubing adapter is suitable for up to 10mm tubings.
Made of DURAN® tubing. Adapter, NS cone to 10mm bore tubing connector. Straight or angled (90°). Available with or without solid glass plug, bore 2,5 mm.
Made of DURAN® tubing. DIN 12257 and in addition to DIN standard. Expansion adapters with ground joint.
Screw thread adapters , made of DURAN® tubing, with screw-cap with aperture and silicone sealing ring with PTFE washers.
Customers also bought
Crystallising dishes without spout. DIN 12337. Autoclavable.
To DIN 12906. With spout, pestle not supplied. Glazed externally. Inside rough.
Gasket made of soft silicone ring with removable PTFE sleeve. Temperature resistant from -60 to 230 °C.
The evaporating dish is characterised by high thermal and chemical resistance. Suitable for a variety of laboratory applications. With practical spout and flat bottom.GlazedAccording to DIN 12903Temperature resistant up to 900 °C
Protective gloves according to PPE Regulation EU 2016/425 (Cat. III)Powder-freeChlorinated with latex-free polymer inner coatingWith rolled edgeAmbidextrousThickness on the palm: 0,12 mmThiuram free,AQL 1,5According to EN ISO 374-1:2016/Type B, EN ISO 374-5:2016, EN 420 Food-safe.