Screw pumps VACUU·PURE® 10C
CHF 13,140.00*
Content:
1
Delivery according to order confirmation
Product number:
4679583
Manufacturer:
Vacuubrand GmbH & Co.KG
Packaging information:
Weight:
21.5 kg
Description
Powerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.
The chemical-resistant version VACUU·PURE® 10C is protected against corrosion due to chemically resistant polymers on all wetted parts. A thick-walled PEEK encapsulation protects the spindles and stator inside the pumping chamber, providing high chemical resistance. An integrated sealing gas supply prevents the bearings from chemical attack. Due to the design-related high condensate compatibility, no gas ballast is required, even with high vapor loads.
- For ultra-clean processes and pure products
- 100% oil-free due to cantilevered spindles
- Abrasion-free due to contact-free operating principle
- No wear parts
- Quick drying after high condensate load
- Suitable for continuous operation
- With air cooling
- Rotatable inlet
- With Modbus RTU interface
Properties
| Connection pressure side: | KF DN 25 |
|---|---|
| Connection suction side: | KF DN 25 |
| Depth: | 507 mm |
| Dimensions (WxDxH): | 269 x 507 x 413 mm |
| Flow rate: | 150 |
| Height: | 413 mm |
| IP code: | IP 20 |
| Manufacturer Article Number: | 20751000 |
| Max. voltage: | 230 V |
| Noise level: | 55 db(A) |
| Plug type: | EU |
| Power supply: | 230 V, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Type: | VACUU·PURE® 10C |
| Type of auxiliary energy: | Mains connection |
| UNSPSC: | 40151502 |
| Ultimate vacuum: | 0.005 mbar |
| Weight: | 21.1 kg |
| Width: | 269 mm |
Skip product gallery
From
CHF 11,040.00*
Other customers also bought
Vacuubrand GmbH & Co.KG
Vacuubrand GmbH & Co.KG
Screw pumps VACUU·PURE® 10
Powerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interfacePowerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interface
Skip product gallery
Piston pump LLG-uniVACUUPUMP 1
From
CHF 492.70*
Piston pump, complete
From
CHF 680.00*
Screw pumps VACUU·PURE® 10
From
CHF 11,040.00*
Similar products
The portable piston pump LLG-uniVACUUPUMP 1 has been developed for vacuum and pressure applications in the laboratory, in particular in the field of Life Science. Typical applications for this low-cost vacuum pump are the single funnel filtration of aqueous and buffered solutions, SPE, as well as any applications where no harmful gases are conveyed. The LLG-uniVACUUPUMP 1 operates oil-free and can also be used as a compressor to a pressure up to 3.3 bar. This allows you, for example, pressure filtration, if vacuum filtration is not sufficient.Not recommended for pumping organic, acidic, or basic vapours.Advantages:Dry-running technology for physical applicationsCan be used as a vacuum pump and compressorCost-effective alternative for water pumpsSound suppressor for quiet operationCompact, light weight and portableOil-free, suitable for continuous operationSuction/pressure connection: hose nozzle DN 6 for hose inner diameter 6 mmMax. Operating gas temperature: 60 °CScope of supply: Pump, incl. 2 hose clamps, EU + UK-plug power cord
Piston pumps are a reliable partner for physical applications, notably with aqueous solutions. Being a vacuum pump and compressor, it can be used for a wide variety of applications such as filtration, gas sampling, vacuum drying, desiccation and automation technology. The integrated vacuum and pressure gauges and regulators allow the pressure to be continuously monitored and adjusted. For use with dry or aqueous vapor applications only.Oil freeEasy to cleanEasy maintenanceEasy handling and control featuresRobust constructionPressure connection with exhaust silencerSuction/pressure connection: hose nozzle DN 8 for hose inner diameter 8 mmMax. Operating gas temperature: 60 °CScope of delivery: vacuum pump, vacuum and pressure regulators with gauges, inlet water trap and muffler
Powerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interfacePowerful vacuum pumps for dry and hydrocarbon-free operation. Due to their unique operating principle, they generate ultra-pure vacuum as well as contamination-free exhaust air and work abrasion-free. They have been specially developed for processes down to the 10-3 mbar range, but can also be used without any problems at working pressures above 1 mbar.For ultra-clean processes and pure products100% oil-free due to cantilevered spindlesAbrasion-free due to contact-free operating principleNo wear partsQuick drying after high condensate loadSuitable for continuous operationWith air coolingRotatable inletWith Modbus RTU interface