Screwthread couplings, PBT | Thread GL: 45
Product number:
9209008
Manufacturer:
DWK Life Sciences GmbH (Duran)
Length:
64 mm
Width:
58 mm
Height:
57 mm
Weight:
0.048 kg
* Specifications refer to the packaging unit
DIN screwthread. For flexible connection of two glass screwthreads. With integral PTFE-faced silicone (VMQ) seals. Temperature resistant to max. 180°C.
| Manufacturer Article Number: | 292261055 |
|---|---|
| Thread GL: | 45 |
Other customers also bought
Bohlender GmbH
Laboratory threaded joints - GL 14 / 18 / 25
Enables GL threads to clamp easily to fluoroplastic or thick-walled tubing made out of other plastics, glass or metal. (Ideally suited for connection with Bola GL fittings, Bola pressure valves, Bola GL taps and Bola GL ball valves).The laboratory threaded joints consist of a red screw cap made of glass-fibre reinforced ETFE, a sealing disc and a tapered sealing ring made of PTFE, as well as a V-ring made of glass-fibre reinforced ETFE. This patented system withstands pressures up to approx. 10 bar, is suitable for a vacuum (at room temperature in the case of sizes 14 to GL25) and is easy to assemble without tools. The substance that passes through only comes in contact with PTFE.Bola laboratory threaded joints can, for example, be used to hold probes (including stainless steel probes), sensors, laboratory taps, submerged tubes, thermometers or as a cable feed.
Similar products
Red. With central hole (diameter outlined below). Temperature resistance to max. 180°C.
For GL-screwthread caps. Overall diameter and wad thickness as outlined below. Thermical resistance: 130°C (steam) / 200°C (heat). Autoclavable.
Made of DURAN® tubing. DIN 12257 and in addition to DIN standard. With GL thread and NS core.
Made of DURAN® tubing. DIN 12257 and in addition to DIN standard. Reduction adapters with ground joint.
With vulcanized PTFE sleeveFor screwthread capsThermical resistance: 130°C (steam), 200°C (heat)Autoclavable
Red. With DIN thread (GL) and aperture. temperature resistant up to 180°C.
Manufactured from borosilicate glass 3.3 in two different forms, straight or 90° angled. Supplied with PTFE stopcock which has of 2.5mm diameter bore key. Tubing adapter is suitable for up to 10mm tubings.
Made of DURAN® tubing. Adapter, NS cone to 10mm bore tubing connector. Straight or angled (90°). Available with or without solid glass plug, bore 2,5 mm.
Made of DURAN® tubing. DIN 12257 and in addition to DIN standard. Expansion adapters with ground joint.
Screw thread adapters , made of DURAN® tubing, with screw-cap with aperture and silicone sealing ring with PTFE washers.