Sealing caps for test tubes, versilic silicone
CHF 4.80*
Content:
1
| Quantity | Unit price |
|---|---|
| To 49 |
CHF 4.80*
|
| From 50 |
CHF 3.80*
|
7 Available. Delivery time: 5-7 workdays
Product number:
9231541
Manufacturer:
Saint Gobain
Packaging information:
Length:
21 mm
Width:
5 mm
Height:
20 mm
Weight:
0.003 kg
Description
Transparent. Sealing caps have a slight taper and offer a very secure hold and are comfortable to use.
Properties
| Colour: | Transparent |
|---|---|
| For ext. Ø: | 25 mm |
| Manufacturer Article Number: | 162025-50 |
| Material: | Silicone |
Skip product gallery
LLG-Test tubes, Fiolax® glass
From
CHF 22.40*
LLG-Test tubes, soda-lime glass
From
CHF 16.30*
Test tubes, DURAN®, heavy wall, without beaded rim
From
CHF 54.80*
Test tube cleaners, rubber
From
CHF 2.90*
Test tubes, boro 3.3, with PP stopper
From
CHF 15.30*
Similar products
With beaded rim and round bottom. High temperature and chemical resistance.
Test tubes with round bottom.Hydrolytic resistance: Class HGB 3 acc. to ISO 719, Type III acc. to C - USP.
Mechanically very resistant. Good thermal shock resistance. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
For removing heavy soiling from test tubes by scraping. With 5 mm boring for rod.
Graduations of approx. volume and markings are in high contrast white enamel.
Skip product gallery
VITsafe™ safety wash bottles, wide-mouth, PP/LDPE
From
CHF 12.00*
Rectangular retort stand bases, enamel, coated steel plate
From
CHF 40.40*
Test tube racks, stainless steel
From
CHF 48.00*
Laboratory bottles, DURAN®, with screw cap
From
CHF 5.70*
Disposable Syringes Omnifix® Solo, 3-piece, Luer slip
From
CHF 16.00*
Funnels, PP
From
CHF 0.80*
Customers also bought
LDPE or PP Bottles, PP spray tube. Safer due to the durable safety imprint in accordance to Directive (EC) No. 1272/2008 (GHS), as well as with all important information: Material name in German, English, French and Spanish, Chemical formula, CAS No., hazard pictogram, signal word, Risk phrases (H phrases), safety phrases (P phrases), as well as NFPA Code. Precise spray jet and optimised medium backflow through the continuous and finely drawn tip of the spray tube. Practically no leakage or dripping with the VENT-CAP screw cap, the design of which prevents almost all static overpressure.
Highly stable laboratory stand due to the steel rectangular base which is stove enamel coated. With an M10 threaded hole in the middle of one short side. Rubber support feet prevents the stand from sliding. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".
Corrosion resistant, stainless steel wire. Electrochemically polished. Opening size 18 x 18mm. Mesh grid levels are positioned at the top and 30mm above the base.
With easy to read scale and large labelling field for easy marking, in fired-on, highly durable white ceramic. 10 ml and 25 ml bottles with specially shaped glass rim for better pouring (eliminating the need for an additional pouring ring). ISO 4796-1 compliantWith Retrace code Neutral glass / Type I glass in compliance with USP/EP and JPAutoclavableWith blue PP screw cap and pouring ring.
Material: Polypropylene, Plunger backstop: PolyisoprenePlunger backstop with smooth double sealing ring for slow aspiration and injection of small sample quantitiesHighly transparent barrel with black graduations (in ml) for ideal readability, permanent markingSafe plunger backstop for easy aspiration to the maximum volumeInside siliconizedLuer Slip to put on the needle, centric or eccentricLatex- and PVC-freeSterile, single packedManufactured according to EN ISO 7886-1
Transparent. Rapid flow due to a steep 60° angle. Practical handle with loop for hanging. Food-safe product according to regulation (EU) No. 10/2011.