Sensor protection

Professional pH and redox meter for mobile measurements. The pH/Cond 3320 has a robust, waterproof housing (IP67) and is equipped with a memory as well as a data logger with an adjustable interval between 1 s and 60 min. All entries contain GLP-supporting data, like the date, time and ID number. The modern, waterproof USB interface is used for easy and quick data transfers. Applications: Process chemistry, Life Science, food and beverage industry, pharmaceutical industry (measurement of pH and conductivity according to pharmacopeia).Two inputs for the simultaneous measurement of pH/mV/ISE/redox potentail and conductivityBacklit graphic display for the parallel display of the measured valuesPerfect for monitoring process applicationsWaterproof USB interfaceScope of supply: Meter in transport case with SenTix® 41, TetraCon® 325, buffer solution STP 4 and STP 7, conductivity standard 0.01 mol/l KCl, manual, stand, beaker, CD-ROM, driver software for USB, battaries, cableSpecificationsMeasuring range / ResolutionpH:-2.000 … 19.999 ± 0.005 pHmV:-2500 ... +2500 ± 1 mVISE (mg/l, µmol/l, mg/kg, ppm, %):0.000 … 999999Conductivity:0.000 µS/cm ... 1000 mS/cmSalinity:0.0 ... 70.0TDS:0 mg ... 199.9 g/lTemp.:-5.0 … 105.0 °C ± 0.1 °CMemory:Manually 200/5000 automaticallyPower supply:4 x 1.5 V AA or 4 x 1.2 V NiMH batteryIP code:IP 67

The device SD50 is a robust benchtop meter for measuring pH / mV, ion concentration, and temperature.Large 7" touch screen with intuitive user interfaceElectrode arm EasyPlace™ places the sensor preciselyIntelligent Sensor Management (ISM®) ensures the correct use of the connected sensorAutomatic data transfer to PC or printerCalibration with up to 5 calibration pointsAdditional splash protection thanks to removable coverGLP compliantScope of supply: pH / ion meter, electrode arm EasyPlace™, protective cover, power supply, get-started-guidepH range:-2.000 ... 20.000Accuracy:±0.002Resolution:0.1 / 0.01 / 0.001Calibration points:1 ... 5mV range:2000.0 ... 2000.0 mVAccuracy:±0.1 (-500.0 ... 500.0 mV), ±0.2 (-2000.0 ... 2000.0 mV)Resolution:1 / 0.1 mVIon concentration:0.00000 ... 999999 % mmol/l, % mol/l, % mg/l, % ppm 0.000 ... 100.000 mmol/l, mol/l, mg/l, ppmCalibration points:1 ... 5Temperature range:-30 ... 130 °CAccuracy:±0.1 (0 ... 100 °C)Resolution:0.1 °CIP code:IP54

Professional pH and redox meter for mobile measurements. The pH/Cond 3320 has a robust, waterproof housing (IP67) and is equipped with a memory as well as a data logger with an adjustable interval between 1 s and 60 min. All entries contain GLP-supporting data, like the date, time and ID number. The modern, waterproof USB interface is used for easy and quick data transfers. Applications: Process chemistry, Life Science, food and beverage industry, pharmaceutical industry (measurement of pH and conductivity according to pharmacopeia).Two inputs for the simultaneous measurement of pH/mV/ISE/redox potentail and conductivityBacklit graphic display for the parallel display of the measured valuesPerfect for monitoring process applicationsWaterproof USB interfaceScope of supply: Meter in transport case, manual, CD-ROM, driver software for USB, batteries, cableSpecificationsMeasuring range / ResolutionpH:-2.000 … 19.999 ± 0.005 pHmV:-2500 ... +2500 ± 1 mVISE (mg/l, µmol/l, mg/kg, ppm, %):0.000 … 999999Conductivity:0.000 µS/cm ... 1000 mS/cmSalinity:0.0 ... 70.0TDS:0 mg ... 199.9 g/lTemp.:-5.0 … 105.0 °C ± 0.1 °CMemory:Manually 200/5000 automaticallyPower supply:4 x 1.5 V AA or 4 x 1.2 V NiMH batteryIP code:IP 67

Professional digital multiparameter meters for mobile measurement, wireless preparation, data logger manually or automatically (timed). Easy to clean with a soft brush under water jet. The Multi 3630 IDS with three universal measurement channels is suitable for all WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors, whether connected to cable or wireless. Documentation of meter and sensor data. User control over MultiLab® users. With USB-A and Mini USB-B interface and colour display.Scope of supply: Meter in a large carrying case with IDS sensors (digital pH sensor SenTix® 940-3, optical sensor FDO® 925-3, digital conductivity cell TetraCon® 925-3), QSC Kit, buffers 4 and 7, conductivity standard, stand, beaker, CD-ROM, batteries, cables, power supply, arming SM Pro

Meter kits are suitable for measuring the pH value and ion concentration of samples and can be used in a wide range of laboratory areas.pH / ion meter SD50 with large 7" touch screen and 5 point calibrationpH electrode InLab® Expert Pro-ISM with robust PEEK shaft, integrated NTC 30 kΩ temperature sensor and ARGENTAL™ reference system. The electrode is always ready for use as the solid XEROLYT® reference electrolyte does not need to be refilledScope of supply: pH / ion meter SevenDirect™ SD50, electrode arm EasyPlace™, pH electrode InLab® Expert Pro-ISM, 3 x 2 calibration buffer sachets pH 4.01, 7.00 and 9.21 or 10.01, protective cover, power supply, get-started-guide

Professional digital multiparameter meters for mobile measurement, wireless preparation, data logger manually or automatically (timed). Easy to clean with a soft brush under water jet. The Multi 3630 IDS with three universal measurement channels is suitable for all WTW IDS pH, ORP, dissolved oxygen sensors, conductivity cells and turbidity sensors, whether connected to cable or wireless. Documentation of meter and sensor data. User control over MultiLab® users. With USB-A and Mini USB-B interface and colour display.Also for controlling OxiTop® IDS.Scope of supply: Instrument, short manual, CD-ROM, rechargeable batteries, driver software for USB, cable, power supply, protection SM Pro, IDS WLM-M module

Meter kits are suitable for measuring the pH value and ion concentration of samples and can be used in a wide range of laboratory areas.pH / ion meter SD50 with large 7" touch screen and 5 point calibrationpH electrode InLab® Science Pro-ISM with ARGENTHAL™ reference system and NTC 30 kΩ temperature sensor. The movable glass sleeve junction can be cleaned easily and thoroughly and facilitates the exchange of the liquid reference electrolyte (3 mol/l KCl)Scope of supply: pH / ion meter SevenDirect™ SD50, electrode arm EasyPlace™, pH electrode InLab® Science Pro-ISM, 3 x 2 calibration buffer sachets pH 4.01, 7.00 and 9.21 or 10.01, protective cover, power supply, get-started-guide

The SD 150 Multi-Parameter handheld instrument is ideal for the sequential determination of pH, Redox/ORP, conductivity, TDS and dissolved oxygen and combines the applications of several instruments in one portable device.Large, easy to read LCD display with contrast adjustmentAutomatic recognition of standard solutionsAutomatic temperature compensationReal time data loggerScope of supply: Instrument, batteries, protective armouring, electrode holder, pH electrode type 226, temperature sensor Pt1000, pH buffer, manualSensoDirect 150 (Set 1) pH / Con / TDS / Oxi / Temp. additionally: Conductivity cell, oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 2) pH / Con / TDS /Temp. additionally: Conductivity cellSensoDirect 150 (Set 3) pH / Oxi / Temp. additionally: Oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 4) pH / Redox / Temp. additionally: Redox electrodeSpecificationspH:0 ... 14 pHORP:-1999 ... 1999 mVConductivity:0 ... 200.0 mS/cmTDS:0 ... 132000 ppmTemperature:0 ... 60 °COxygen:0 ... 20.0 mg/lInterface:USB, RS 232Dimensions (W x D x H):76 x 203 x 38 mmWeight:320 gPower supply:DC 1.5V battery (UM3, AA) x 4 PCs or DC 9V AdapterIP code:IP 51

Modular professional system for measurements of pH, redox potential, conductivity, salinity / TDS and ion concentration. Fits up to three modules in any composition and order, can be expanded with additional measurement parameters at any time. Large, high resolution 7'' colour touch display (capacitive), very clear and easy to operateModularity and flexibility; up to 3 measuring modules can work in parallel, expansion to 2 or 3 channels possibleUniversal communication via 2 x USB, Ethernet (LAN) and RS232Plain text user interface in 10 languages with menu guidance in full sentencesOneClick™ operation concept to quickly start frequently used functions and preferred methodsStorage for user methodsHighest security and GxP support (ID protection, sophisticated user management, limits / alarms, integrated radio clock, etc.)Intelligent sensor management (ISM®)Connection of stirrer, sample changer, PC, barcode reader, keyboard, local or network printer possibleStorage up to 20000 data sets (measurements, calibrations, methods)17 predefined and 60 user-defined methods12 most commonly used ion types pre-programmed for convenience5 point calibration (pH), 8 pre-defined and 20 user-defined buffer groups, incl. temperature chartuPlace™ electrode arm with perfect vertical movementCompatible with all METTLER TOLEDO electrodes (Recommended: ISM® electrodes)Capable of ion concentration measurements using a suitable Ion Selective ElectrodeMethods included for the most common incremental ion measurement techniquesScope of supply:S500-Basic: Includes instrument, 1 x pH/Ion expansion unit, 2 x blank expansion units, uPlace™ electrode holder,semi-transparent cover, operating instructions, installation and quick guide, LabX® direct pH PC software, declaration of conformity, test certificateS500-Kit: As S500-Basic, but also with InLab® Expert Pro-ISM, guide to pH measurements, 2 buffer sachetsfor pH 4.01, 7.00, 9.21, 10.00S500-Bio: As S500-Kit but with InLab® Routine Pro-ISM cable kit instead of InLab® Expert Pro-ISMS500-F: As S500-Kit but with PerfectION™ Fluoride instead of InLab® Expert Pro-ISMSpecificationsMeasuring range // Resolution // AccuracyTemperature MTC / ATC:-30.0 to 130.0 °C // 0.1 °C // ± 0.1 °CpH:-2.000 to 20.000 // 0.001 / 0.01 / 0.1 // ± 0.002mV :-2000.0 to 2000.0 // 0.1 / 1 // ± 0.1Rel. mV:-2000.0 to 2000.0 // 0.1 / 1 // ± 0.1Ion concentration:0 to 999 999 mg/L, ppm // 0.001to 1 // ± 0.5% 0 to 100 mol/L, % // 0.0001 to 1 // ± 0.5% 0 to 100 000 mmol/L // 0.001 to 1 // ± 0.5% -2 to 20 pX // 0.001 to 1 // ± 0.5%

Intelligent, digital IDS sensors promotes the inoLab® Multi 9310 IDS to a perfect all-rounder. The universal digital input is ready for all available laboratory IDS sensors. No matter whether pH, conductivity or dissolved oxygen, when plugged into a suitable sensor the inoLab® Multi 9310 becomes either a pH, conductivity or dissolved oxygen meter. An integrated thermal printer (58 mm width) is ready for printout of the measured data (option). The inoLab® Multi 9310 IDS is wireless ready.Secure measurementsDigital data transfer eliminates interferences, provide secure calibration data and makes documentation of sensor data easyThe smart sensor rating (QSC) gives information about the true condition of an IDS pH electrode and increases safety of operationThe CMC function for pH visualizes the optimum measuring range and supports correct measurementsDocumentation according GLP/AQAAutomatic digital recording of all sensor data for distinct documentationOptional user administration for clear allocation of user and measurement results and assigning different access levelsTransfer of data as *.csv format via USB to PC, if desired transfer direct to Excel (MultiLab Importer, part of scope of delivery or as download from internet)Additional transfer to USB memory drive or selected printerScope of supply: Laboratory instrument, universal power supply, stand, operating instructions, USB cable, digital IDS pH electrode SenTix® 980, buffers 4, 7 and 10.01, 3 mol/l KCl