Sound insulation box for ultrasonic homogenisers
CHF 1,736.00*
Content:
1
Delivery according to order confirmation
Product number:
7980809
Manufacturer:
Hielscher Ultrasonics GmbH
Packaging information:
Length:
510 mm
Width:
393 mm
Height:
400 mm
Weight:
14 kg
Description
Sound insulation box made of acrylic glass with divisible rod (Ø 16 mm), height-adjustable table and anti-slip mat. Sound insulation 22 dB (A) open air measurement.
Properties
| Dimensions (L x W x H) mm: | 290 x 200 x 350 |
|---|---|
| For: | UP50H / UP100H / UP200Ht / UP200St |
| Manufacturer Article Number: | SPB-L |
| Type: | SPB-L |
| Weight kg: | 13 |
Skip product gallery
Ultrasonic homogeniser, SONOPULS HD 4050, set without stand annd vessel
From
CHF 5,851.00*
Sonotrode for compact ultrasonic processor UP200S/UP200H
From
CHF 428.00*
Sonotrodes for ultrasonic homogenisers SONOPULS HD 5050 / SONOPULS HD 4000 series
From
CHF 108.00*
Holding frame for Ultrasonic homogenisers SONOPULS
From
CHF 1,343.00*
Booster horns and stepped horns for SONOPULS Ultrasonic homogenisers, TiAl6V4
From
CHF 483.00*
Sound proof box LS 40
From
CHF 2,523.00*
Accessories for Ultrasonic Processor UP50H/UP100H
From
CHF 407.00*
Ultrasonic Processor UP50H/UP100H
From
CHF 4,538.00*
Sonotrodes for ultrasonic homogenisers UP200Ht / UP200St, titanium
From
CHF 453.00*
Similar products
Suitable for homogenising, desagglomerating, emulsifying, suspending, accelerating chemical reactions or disruption of cells, bacteria, fungi or spores. The devices of the SONOPLUS 4000 series are characterised by optimised process times and quickly available reproductive results.LC display for amplitude, pulse level, time and powerPulse mode, AMPLICHRON®-circuitData memoryBatch mode/sequencingTemperature display and measurementRemote control via PC RS 232Interference suppressionAlso available as medicine product according to the guideline for in-vitro-diagnostica 98/79/EG.For volumes from 0.5 to 100 ml. Ready-to-operate set for volumes from 0.5 to 20 ml consisting of:HF generator GM 4200Ultrasonic converter UW 50Titanium probe TS 102, diam. 2 mmFurther Titanium probes with diam. 3 mm, 4.5 mm and 6 mm available on request.HF generator
Dimensions (W x D x H):GM 4200
150 x 335 x 220 mmConverterUW 50Dimensions (diam. x L):45 x 175 mmUltrasonic nominal power:max. 50 W
Titanium, approx. length 100 mm.* with glass flow vessel GD14K.
Titanium sonotrodes.For connection to stepped horns/booster horns.
For correct and variable positioning of the ultrasonic transducers.Suitable for direct and indirect sound reinforcementCan be used with and without LS 40 noise protection boxCommercially available sockets can be mounted on stand rod (d=16 mm)Material base and rod: stainless steel
Booster horns, stepped horns for connection of interchangeable sonotrodes (probes). Further booster horns are available on request.
To reduce the noise level when sonicating samples with an ultrasonic homogeniser. The lower part of the interior and the removable bottom tray are made of stainless steel and are therefore chemically resistant and easy to clean.Noise reduction of up to 30 dB-AULED interior lightingAcrylic glass windowWith effective ventilation systemWith opening (40 x 70 mm) for cooling tubing, sample circulation or the SONOPULS temperature sensor on the backRemovable bottom trayEasy retrofitting for use with sonotrodes or cup booster possibleThe stand HG 40 is required to attach the ultrasonic converter. Please order separately.
MS0.5 - MS10: Sonotrodes made of titanium, approx. length 80 mm.T1: Timer from 00:00 to 99:59 (min:sec).
For manual operation or for stand use, frequency 30kHz, automatic frequency tuning system, amplitude adjustable 20% to 100%, pulse 0 to 100%, dry running protected, in portable case, with mounting for stand STH-16 and mounting tools, 230V a.c.
Sonotrodes made of titanium. With M6x0.75 male thread. Autoclavable.Sonotrodes S26d2D and S26d7D with seal for closed systems for use with flow cell reactor.