Support rods, stainless steel
Product number:
4008492
Manufacturer:
ISOLAB Laborgeräte GmbH
Packaging information:
Length:
605 mm
Width:
23 mm
Height:
15 mm
Weight:
0.53 kg
Description
18/10 stainless steel.
Properties
| Dimensions (ØxL): | 12 x 600 mm |
|---|---|
| Length: | 600 mm |
| Manufacturer Article Number: | 049.07.004 |
| Material: | Stainless steel |
| Thread: | M 10 |
| UNSPSC: | 30-19-15-02 |
| Ø: | 12 mm |
Skip product gallery
From
CHF 10.60*
Other customers also bought
BOCHEM Instrumente GmbH
BOCHEM Instrumente GmbH
Support rods galvaniser steel
Galvanised steel. With or without M10 thread.
Skip product gallery
Bosshead
From
CHF 13.90*
Burette holders
From
CHF 37.20*
Bossheads, zinc die casting, with brass screws
From
CHF 5.80*
Cross bosshead, cast steel
From
CHF 15.70*
Table clamps for rods, malleable cast iron, coated
From
CHF 85.90*
Bossheads, Zinc die casting, with steel screws
From
CHF 5.15*
Rectangular retort stand bases, enamel, coated steel plate
From
CHF 40.40*
Similar products
Malleable cast iron with lacquered chrome finish. DIN 12895. With lug screw.
Aluminium, powder-coated. With roller grips and bosshead for retort stand rods.
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
Chrome plated cast steel. Suitable for frame works and fixing perpendiculars. Can be moved vertically and horizontally along the rods.
For table tops with a thickness of max. 55mm. Rod diameter 12/13mm.
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
Highly stable laboratory stand due to the steel rectangular base which is stove enamel coated. With an M10 threaded hole in the middle of one short side. Rubber support feet prevents the stand from sliding. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".
Skip product gallery
VITsafe™ safety wash bottles, wide-mouth, PP/LDPE
From
CHF 12.00*
Laboratory bottles, DURAN®, with screw cap
From
CHF 12.20*
LLG-Spoon spatulas, 18/10 steel, right hander
From
CHF 7.75*
Sealing caps for test tubes, versilic silicone
From
CHF 1.50*
Bossheads, zinc die casting, with brass screws
From
CHF 5.80*
Customers also bought
LDPE or PP Bottles, PP spray tube. Safer due to the durable safety imprint in accordance to Directive (EC) No. 1272/2008 (GHS), as well as with all important information: Material name in German, English, French and Spanish, Chemical formula, CAS No., hazard pictogram, signal word, Risk phrases (H phrases), safety phrases (P phrases), as well as NFPA Code. Precise spray jet and optimised medium backflow through the continuous and finely drawn tip of the spray tube. Practically no leakage or dripping with the VENT-CAP screw cap, the design of which prevents almost all static overpressure.
With easy to read scale and large labelling field for easy marking, in fired-on, highly durable white ceramic. 10 ml and 25 ml bottles with specially shaped glass rim for better pouring (eliminating the need for an additional pouring ring). ISO 4796-1 compliantWith Retrace code Neutral glass / Type I glass in compliance with USP/EP and JPAutoclavableWith blue PP screw cap and pouring ring.
One side with curved spoonOne side with straight, triangular spatula
Transparent. Sealing caps have a slight taper and offer a very secure hold and are comfortable to use.
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
