Surface protection paper MN 210, PE coated, roll
CHF 234.00*
Content:
1
Delivery according to order confirmation
Product number:
6228264
Manufacturer:
Macherey-Nagel GmbH & Co. KG
Packaging information:
Weight:
3.7 kg
Description
The absorbent paper is coated with polyethylene on one side. Liquids are effectively absorbed and can be disposed with the paper, the surface under the paper stays clean.
Properties
| Colour: | White |
|---|---|
| Length: | 50 m |
| Manufacturer Article Number: | 112050 |
| Material: | Cellulose |
| Thickness: | 220 µm |
| UNSPSC: | 41-10-49-29 |
| Weight: | 140 g/m² |
| Width: | 480 mm |
Skip product gallery
From
CHF 172.00*
From
CHF 315.00*
From
CHF 132.00*
From
CHF 199.00*
Other customers also bought
Cytiva Europe GmbH
Cytiva Europe GmbH
Benchkote surface protector®, sheets
The upper side consists of a particularly absorbent filter paper, the lower side is a non-permeable, chemically resistant PE layer. This combination makes Benchkote into a protective paper with a particularly high wet strength for universal use, helping to meet the requirements of Good Laboratory Practice (GLP):Completely absorbs escaped liquidsPrevents spills from reaching the workbenchProtects against contaminationApplications:Surface protection for lab workbenches, trays or chemical cabinetsContamination protection, e. g. in isotope or bacteriological labsAdsorption of toxic or radioactive substancesHygienic protection in animal cagesAtmospheric regulation in humidity chambers
Ahlstrom-Munksjö Germany GmbH
Ahlstrom-Munksjö Germany GmbH
Bench protection paper, LabSorb, rolls
LabSorb is two-layered: The top layer is a quality filter paper to enable rapid absorption of spilt liquids. The bottom layer is polyethylene-coated and protects the surface underneath from contamination and damage.Other formats and sizes are available on request.
Bel-Art Products
Bel-Art Products
Bench protector, Labmat™
White. Labmat™ Bench Liner speeds clean-up and safeguards work surfaces from stains, spills and wear. Highly absorbent upper surface. Flexible polyethylene film backing is non-skid and prevents soak-through of most solutions. Simply roll up and discard after contamination.
Hahnemühle FineArt GmbH
Hahnemühle FineArt GmbH
Surface Protector with polyethylene layer
The double layer enables total protection of surfaces in the laboratory, thanks to its waterproof polyethylene layer that prevents liquids from reaching the protected surface.Cellulose layer: pure filter paper enables a large quantity of liquids to be absorbed.Polyethylene layer: totally waterproof, prevents liquids from reaching the protected surfaceThe high purity of the filter paper allows for recovery of the spilt liquidsWeight 120 g/m2, Thickness 0.2 mm, absorbs 110 g/m2
Skip product gallery
PARAFILM® M sealing film
From
CHF 17.60*
LLG-Pressure-seal bags, PE
From
CHF 4.30*
Aluminium foil, short rolls in carton dispenser
From
CHF 5.80*
LLG-Surface protector DescProtect, sheets
From
CHF 71.70*
LLG-Pressure-seal bags with write on patch, PE
From
CHF 2.65*
Aluminium foil, Toppits®
From
CHF 7.62*
Aluminium Pop-up sheets
From
CHF 27.40*
Similar products
Tip
Can be stretched up to 200 % and clings around irregular shapes and surfaces. Parafilm® M is resistant to many polar substances such as saline solutions, inorganic acids and alkaline solutions for up to 48 hours (After this time it may become brittle).
Transparent. PE. With rim channel seal that can be opened and closed repeatedly.
Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.
DescProtect is a durable paper which quickly absorbs liquid spills. The PE-coated base layer stops liquids reaching the work surface.Stays flat, does not ripple or curl to de-stabilise vesselsWhite surface can be written on using pens or pencilsRapid absorption of liquid spillsExcellent fluid protectionNo contamination of work surfaces or laboratory cabinetsSuitable for school laboratories, wet chemistry, industrySurface protection paper with two layers:Layer 1: Highly absorbent carrier paper, sucks up spilled toxic or radioactive liquids quicklyLayer 2: Wetness impermeable polyethylene layer, protection for lab workbenches, trays or chemical cabinetsAdditional advantages: impermeable cover in animal cages, ideal in humidity chambers for atmospheric regulation
Transparent. PE. With rim channel seal that can be opened and closed repeatedly, and write-on patch.
For transporting or keeping food fresh.TearproofHeat resistantEasy handling by tear-off sawAlso available extra wide
Embossed pure aluminium foils, extremely tare resistent.Handy for everyday useHeat-resistant up to 600°CAir-tight and a barrier to lightDimensions (sheet): 230 mm x 270 mm200 sheets in a box
