Thermostatic controller Optima™ TX150
CHF 2,164.00*
Content:
1
Delivery according to order confirmation
Product number:
9699632
Manufacturer:
Grant Instruments Ltd.
Packaging information:
Length:
442 mm
Width:
308 mm
Height:
200 mm
Weight:
3.6 kg
Description
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use. The advanced heating circulator features a modern, icon driven programming interface and full colour display.
For using at or below room temperature you need additional flow coolers C1G or C2G.
Models with clamps available on request.
- Large, bright full colour display
- Visual and audible alarm
- Timer from 1 min to 99 h 59 min
- 5 point recalibration
- Adjustable over temperature cut-out
- Pump for external circulation
- External temperature probe
- Progammable: Remote via PC/labtop, 1 program/30 segments
- Relay output to enable control of an external device
- USB and RS232 interface
For using at or below room temperature you need additional flow coolers C1G or C2G.
Models with clamps available on request.
Properties
| Depth: | 172 mm |
|---|---|
| Dimensions (WxDxH): | 141 x 172 x 342 mm |
| Heating capacity: | 1840 W |
| Height: | 342 mm |
| Manufacturer Article Number: | TX150 |
| Max. delivery pressure: | 0.31 bar |
| Max. flow rate: | 18 l/min |
| Max. temperature: | 150 °C |
| Max. voltage: | 230 V |
| Min. temperature: | +5 °C |
| Power supply: | 230 V, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Programmable: | Yes |
| Temperature: | RT+5 ... 150 °C |
| Temperature addition: | RT |
| Temperature stability: | ±0,01 °C (70 °C) |
| Type: | TX150 |
| Type of auxiliary energy: | Mains connection |
| Type of display: | QVGA TFT |
| Weight: | 2.6 kg |
| Width: | 141 mm |
| With timer: | Yes |
Skip product gallery
From
CHF 113.00*
From
CHF 435.00*
From
CHF 209.00*
Accessories
Grant Instruments Ltd.
Grant Instruments Ltd.
Clamp for Thermostatic controllers Optima™ T100 / TC120 / TX150 / TXF200
For attaching the thermostats to any vertical sided tank with a maximum wall thickness of 35 mm for rectangular tanks, 30 mm for circular tanks (300 mm diameter), and a capacity of up to 50 l.
Grant Instruments Ltd.
Grant Instruments Ltd.
Tanks Optima™ series, stainless steel
High efficiency stainless steel (ST) tanks (range -15 °C to 200 °C). Drain tap included on ST12, ST18, ST26, ST38. Raised feet for carrying repositioning and retort access. Accessory polypropylene spheres or a lid must be used at temperatures between 60 °C and 100 °C. Above 100 °C only a lid must be used. Accessory cooling is required for temperatures below ambient.Please order lid and PP spheres separately.
Grant Instruments Ltd.
Grant Instruments Ltd.
Labwise software for Thermostatic controllers Optima™ series
Permits the remote set-up and programming of thermostats with interface from a PC. Real-time temperature / time profile and graphic representation of processes. Profile documentation and programme memory on disk. Minimum requirements: Microsoft Windows XP, Vista (32/64 bit), or Windows 7 (32/64 bit). Pentium III / Celeron 866 MHz or equivalent.
Skip product gallery
From
CHF 1,310.00*
From
CHF 2,726.00*
From
CHF 1,559.00*
Other customers also bought
Grant Instruments Ltd.
Grant Instruments Ltd.
Thermostatic controller Optima™ T100
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use. The general purpose heating circulator offers excellent temperature stability and uniformity.Clear, bright 4 digit LED display3 programmable temperature pre-setsVisual alarm2 point recalibrationFixed over temperature cut-outFor use at temperatures below RT, the C1G or C2G cooler must be ordered additionally.Models with clamps available on request.
Grant Instruments Ltd.
Grant Instruments Ltd.
Thermostatic controller Optima™ TXF200
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use. The advanced heating circulator features a modern, icon driven programming interface and full colour display.Large, bright full colour displayVisual and audible alarmTimer from 1 min to 99 h 59 min5 point recalibrationAdjustable over temperature cut-outPump for external circulationExternal temperature probeProgammable: Direct via user interface or remote via PC/labtop, 10 programs/100 segmentsRelay output to enable control of an external deviceUSB and RS232 interfaceFor use at temperatures below RT, the C1G or C2G cooler must be ordered additionally.Models with clamps available on request.
Grant Instruments Ltd.
Grant Instruments Ltd.
Thermostatic controller Optima™ TC120
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use. The general purpose heating circulator offers excellent temperature stability and uniformity.Clear, bright 4 digit LED display3 programmable temperature pre-setsVisual and audible alarmTimer from 1 min to 99 h 59 min2 point recalibrationAdjustable over temperature cut-outPump for external circulationFor use at temperatures below RT, the C1G or C2G cooler must be ordered additionally.Models with clamps available on request.
Skip product gallery
Heating circulators
From
CHF 2,540.00*
Heating circulator bath DYNEO™ DD-BC
From
CHF 3,881.00*
Test tube racks for heating and refrigerated circulators MAGIO™/DYNEO™/CORIO™
From
CHF 127.00*
Heated circulating bath with stainless steel tank Optima™ T100-ST series
From
CHF 1,743.00*
Test tube racks for water baths PURA™, shaking water baths SW and heating circulators CORIO™
From
CHF 76.80*
Heating bath circulator CORIO™ CD-BT, with transparent bath tank
From
CHF 1,903.00*
Thermostatic baths with polycarbonate tanks
From
CHF 2,280.00*
Similar products
Good things come in small packages! Thanks to their low bath volumes the models CC-104A und KISS-104A (with polycarbonate bath) as well as the CC-202C and KISS-202C (with stainless steel bath) are especially suitable for controlling the temperature of small external applications. All models are fitted with rear mounted M16 x 1 pump connections as standard. Models with the Pilot ONE have a speed regulated pressure/suction pump. The temperature constancy, in accordance with DIN12876, is 0.02 K with the Compatible Control models and 0.05 K for the KISS models. Models CC-202C and KISS-202C are fitted with an integrated cooling coil as standard. With the models CC-104A and KISS-104A the cooling coil is an optional extra.Temperature range
CC-104A/KISS-104A:
CC-202C/KISS-202C:
(15) 25 to 100 °C
(-30) 45 to 200 °CTemp. Stability to DIN 12876
CCmodels:
KISS models:
0.02 K
0.05 KSafety class:FL, IIIBath depth:150 mmHeating capacity:2 kW
For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.For internal and external applications. With powerful components and a large, easy-to-read coloured TFT display. Operation is simple and intuitive via the central controller on the front of the device.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsContinuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)USB interfaceExternal Pt100 sensor connectionHigh-quality bath tanks made of stainless steelClass III (FL) acc. to DIN 12876-12 hose connectors for 8 and 12 mm I.W. and bath lid included.
Test tube racks made of stainless steel.Suitable for heating circulators with the bath types BC4, BC6, B5, BT5 and refrigerated circulators with the bath types 200F, 201F, 300F, 310F, 450F.
Universal use with precise temperature control for simple applications in a setting range from 0 to 100 °C.3 programmable temperature presetsLow liquid protection and fixed over temperature cut-outVisual alarm in case of malfunctionsClear, bright, 4 digit LED displayThermostat can be used in combination with any other Grant stainless steel tank or with a T-CLAMP with any vertical sided tankScope of supply: Thermostat, bridge plate, stainless steel tankFor cooling below ambient temperature, please order cooler separately.
Test tube racks made of plastic.Suitable for heating thermostats CORIO™ C and CD with the bath types B13, B17, B19, BT19, B27, BT27, B33.
Heating bath circulator for internal and external temperature applications with transparent bath tank and pump connections.Bright, white, easy to read displayVery quietPump change-over between internal and external circulationUSB connectionClass III (FL) according to DIN 12876-1
The transparent polycarbonate baths are suitable for use up to 100°C. An immersion thermostat is mounted on the bath bridge for all models. With a pump adapter, this combination can also be used with external, closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.Temperature max.:100 °CTemp. Stability at 70 °C to DIN12876KISS E:
CC-E:0.05K
0.02KSafety class:FL, IIIBath depth:150mm